Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=24786): Process ended prematurely: osmo-stp_10.42.42.5(pid=24786) [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24786)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 22:54:51.102946 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.114792 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 22:54:51.260760 tst ping_idle_ping.py: using LAC 17317 22:54:51.385365 tst ping_idle_ping.py: using RAC 232 22:54:51.504291 tst ping_idle_ping.py: using CellId 17317 22:54:51.623110 tst ping_idle_ping.py: using BVCI 17318 22:54:51.646297 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.656830 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.667528 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.678396 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.688906 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.699531 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.710337 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 22:54:51.721095 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 22:54:52.013224 tst ping_idle_ping.py:24: start network... 22:54:52.147917 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:54:52.663537 run create_hlr_db(pid=24780): Launched 22:54:52.849670 bus /gobi_6: Setting Powered False 22:54:53.872166 run create_hlr_db(pid=24780): Terminated: ok {rc=0} 22:54:54.278403 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24782): Launched 22:54:54.580391 run osmo-hlr_10.42.42.2(pid=24783): Launched 22:54:54.698108 run osmo-stp_10.42.42.5: Starting osmo-stp 22:54:55.230659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24785): Launched 22:54:55.531693 run osmo-stp_10.42.42.5(pid=24786): Launched 22:54:55.641699 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:54:56.172762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24788): Launched 22:54:56.287129 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:54:56.567103 run patchelf(pid=24789): Launched 22:54:56.756483 run osmo-stp_10.42.42.5(pid=24786): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24786)] 22:54:56.894530 run osmo-stp_10.42.42.5(pid=24786): stdout: | (launched: 2022-12-08_22:54:55.383469) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:54:57.033184 run osmo-stp_10.42.42.5(pid=24786): stderr: | �[0;m�[38;5;43m20221208225455551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225455552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225455552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225455552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225455554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225455555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225455555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:54:57.167246 run osmo-stp_10.42.42.5(pid=24786): stdout: | (launched: 2022-12-08_22:54:55.383469) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:54:57.299635 run osmo-stp_10.42.42.5(pid=24786): stderr: | �[0;m�[38;5;43m20221208225455551 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225455552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225455552 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225455552 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225455554 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225455555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225455555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:54:57.454732 run patchelf(pid=24789): Terminating (SIGINT) 22:54:57.636300 run patchelf(pid=24789): Terminated: ok {rc=0} 22:54:57.669099 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=24786): Process ended prematurely: osmo-stp_10.42.42.5(pid=24786) [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24786)] [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 22:54:57.678368 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 22:54:57.742384 run osmo-hlr_10.42.42.2(pid=24783): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24783)] 22:54:57.795011 run osmo-hlr_10.42.42.2(pid=24783): stdout: | (launched: 2022-12-08_22:54:54.431246) 22:54:57.848216 run osmo-hlr_10.42.42.2(pid=24783): stderr: | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225454607 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225454619 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225454628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225454628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225454628 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:54:57.893648 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24782): Terminating (SIGTERM) 22:54:57.936403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24785): Terminating (SIGTERM) 22:54:57.979182 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24788): Terminating (SIGTERM) 22:54:57.989256 --- ParallelTerminationStrategy: PID 24782 died... 22:54:58.046765 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24782): Terminated: ok {rc=0} 22:54:58.057213 --- ParallelTerminationStrategy: PID 24785 died... 22:54:58.114695 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24785): Terminated: ok {rc=0} 22:54:58.125504 --- ParallelTerminationStrategy: PID 24788 died... 22:54:58.182219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24788): Terminated: ok {rc=0} 22:54:58.270412 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24786): Process ended prematurely: osmo-stp_10.42.42.5(pid=24786) [trial-2350↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24786)]