Failed
dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=29508): Process ended prematurely: osmo-stp_10.42.42.5(pid=29508) [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29508)]
Standard Output
---------------------------------------------- trial-2351 dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 23:39:04.728379 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:04.740364 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 23:39:04.894987 tst switch_tch_pdch.py: using LAC 17548 23:39:05.011127 tst switch_tch_pdch.py: using RAC 208 23:39:05.134567 tst switch_tch_pdch.py: using CellId 17548 23:39:05.258997 tst switch_tch_pdch.py: using BVCI 17549 23:39:05.283321 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.295144 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.306725 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.318669 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.330653 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.342398 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.354277 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 23:39:05.366116 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 23:39:05.482935 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 23:39:05.759264 tst switch_tch_pdch.py:51: start network... 23:39:05.883134 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:39:06.350395 run create_hlr_db(pid=29502): Launched 23:39:06.521832 bus /gobi_6: Setting Powered False 23:39:07.542635 run create_hlr_db(pid=29502): Terminated: ok {rc=0} 23:39:07.963241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29504): Launched 23:39:08.278666 run osmo-hlr_10.42.42.2(pid=29505): Launched 23:39:08.395700 run osmo-stp_10.42.42.5: Starting osmo-stp 23:39:08.944039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29507): Launched 23:39:09.259242 run osmo-stp_10.42.42.5(pid=29508): Launched 23:39:09.375536 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:39:09.927595 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29510): Launched 23:39:10.040525 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:39:10.315071 run patchelf(pid=29511): Launched 23:39:10.501003 run osmo-stp_10.42.42.5(pid=29508): ERR: Terminated: ERROR {rc=1} [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29508)] 23:39:10.637088 run osmo-stp_10.42.42.5(pid=29508): stdout: | (launched: 2022-12-08_23:39:09.104711) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:39:10.773230 run osmo-stp_10.42.42.5(pid=29508): stderr: | �[0;m�[38;5;43m20221208233909297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233909297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233909298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233909298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233909298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233909298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233909299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:39:10.904415 run osmo-stp_10.42.42.5(pid=29508): stdout: | (launched: 2022-12-08_23:39:09.104711) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:39:11.034655 run osmo-stp_10.42.42.5(pid=29508): stderr: | �[0;m�[38;5;43m20221208233909297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233909297 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233909298 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233909298 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233909298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233909298 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233909299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:39:11.186568 run patchelf(pid=29511): Terminating (SIGINT) 23:39:11.364559 run patchelf(pid=29511): Terminated: ok {rc=0} 23:39:11.396905 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=29508): Process ended prematurely: osmo-stp_10.42.42.5(pid=29508) [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29508)] [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 23:39:11.406196 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 23:39:11.468154 run osmo-hlr_10.42.42.2(pid=29505): ERR: Terminated: ERROR {rc=237} [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29505)] 23:39:11.518685 run osmo-hlr_10.42.42.2(pid=29505): stdout: | (launched: 2022-12-08_23:39:08.124592) 23:39:11.569576 run osmo-hlr_10.42.42.2(pid=29505): stderr: | �[0;m�[1;31m20221208233908323 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233908323 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233908323 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233908324 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233908324 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233908324 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233908337 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233908346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233908347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233908347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:39:11.613813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29504): Terminating (SIGTERM) 23:39:11.655511 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29507): Terminating (SIGTERM) 23:39:11.697250 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29510): Terminating (SIGTERM) 23:39:11.707065 --- ParallelTerminationStrategy: PID 29504 died... 23:39:11.762788 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29504): Terminated: ok {rc=0} 23:39:11.772905 --- ParallelTerminationStrategy: PID 29507 died... 23:39:11.828109 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29507): Terminated: ok {rc=0} 23:39:11.838372 --- ParallelTerminationStrategy: PID 29510 died... 23:39:11.893653 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29510): Terminated: ok {rc=0} 23:39:11.979594 bus /gobi_0: Setting Powered False 23:39:13.082572 bus /gobi_0: Setting Powered False 23:39:14.191928 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29508): Process ended prematurely: osmo-stp_10.42.42.5(pid=29508) [trial-2351↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29508)]