Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=32677): Process ended prematurely: osmo-stp_10.42.42.5(pid=32677) [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32677)]
Standard Output
---------------------------------------------- trial-2351 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 00:15:51.658692 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:51.670919 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 00:15:51.804132 tst ping_idle_ping.py: using LAC 17745 00:15:51.927895 tst ping_idle_ping.py: using RAC 150 00:15:52.051851 tst ping_idle_ping.py: using CellId 17745 00:15:52.176456 tst ping_idle_ping.py: using BVCI 17746 00:15:52.200605 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.211616 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.222682 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.233915 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.245019 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.255788 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.267115 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 00:15:52.278782 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 00:15:52.566419 tst ping_idle_ping.py:24: start network... 00:15:52.700111 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:15:53.203087 run create_hlr_db(pid=32671): Launched 00:15:53.388999 bus /gobi_6: Setting Powered False 00:15:54.409273 run create_hlr_db(pid=32671): Terminated: ok {rc=0} 00:15:54.834929 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32673): Launched 00:15:55.154430 run osmo-hlr_10.42.42.2(pid=32674): Launched 00:15:55.270159 run osmo-stp_10.42.42.5: Starting osmo-stp 00:15:55.826491 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32676): Launched 00:15:56.146732 run osmo-stp_10.42.42.5(pid=32677): Launched 00:15:56.267924 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:15:56.826703 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32679): Launched 00:15:56.940830 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:15:57.219274 run patchelf(pid=32680): Launched 00:15:57.407012 run osmo-stp_10.42.42.5(pid=32677): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32677)] 00:15:57.545062 run osmo-stp_10.42.42.5(pid=32677): stdout: | (launched: 2022-12-09_00:15:55.989281) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:57.682498 run osmo-stp_10.42.42.5(pid=32677): stderr: | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001556179 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:57.815016 run osmo-stp_10.42.42.5(pid=32677): stdout: | (launched: 2022-12-09_00:15:55.989281) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:15:57.946527 run osmo-stp_10.42.42.5(pid=32677): stderr: | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209001556179 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209001556179 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209001556182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:15:58.099364 run patchelf(pid=32680): Terminating (SIGINT) 00:15:58.278717 run patchelf(pid=32680): Terminated: ok {rc=0} 00:15:58.311232 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=32677): Process ended prematurely: osmo-stp_10.42.42.5(pid=32677) [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32677)] [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 00:15:58.320587 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 00:15:58.383258 run osmo-hlr_10.42.42.2(pid=32674): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32674)] 00:15:58.434915 run osmo-hlr_10.42.42.2(pid=32674): stdout: | (launched: 2022-12-09_00:15:54.997527) 00:15:58.486529 run osmo-hlr_10.42.42.2(pid=32674): stderr: | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209001555196 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209001555208 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209001555216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209001555216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209001555216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:15:58.530609 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32673): Terminating (SIGTERM) 00:15:58.572222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32676): Terminating (SIGTERM) 00:15:58.614295 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32679): Terminating (SIGTERM) 00:15:58.624209 --- ParallelTerminationStrategy: PID 32673 died... 00:15:58.679716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32673): Terminated: ok {rc=0} 00:15:58.689798 --- ParallelTerminationStrategy: PID 32676 died... 00:15:58.744713 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32676): Terminated: ok {rc=0} 00:15:58.754962 --- ParallelTerminationStrategy: PID 32679 died... 00:15:58.809809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32679): Terminated: ok {rc=0} 00:15:58.895450 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32677): Process ended prematurely: osmo-stp_10.42.42.5(pid=32677) [trial-2351↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32677)]