Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=657): Process ended prematurely: osmo-stp_10.42.42.5(pid=657) [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=657)]
Standard Output
---------------------------------------------- trial-2351 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 00:22:03.651200 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:03.663895 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 00:22:03.802234 tst ping_idle_ping.py: using LAC 17778 00:22:03.921648 tst ping_idle_ping.py: using RAC 183 00:22:04.046447 tst ping_idle_ping.py: using CellId 17778 00:22:04.172035 tst ping_idle_ping.py: using BVCI 17779 00:22:04.196640 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.208068 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.219257 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.230885 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.242564 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.253702 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.266153 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:22:04.277221 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 00:22:04.568349 tst ping_idle_ping.py:24: start network... 00:22:04.704213 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:22:05.210366 run create_hlr_db(pid=651): Launched 00:22:05.397459 bus /gobi_6: Setting Powered False 00:22:06.417311 run create_hlr_db(pid=651): Terminated: ok {rc=0} 00:22:06.844668 run pcap-recorder_any(filters='host 10.42.42.2')(pid=653): Launched 00:22:07.164892 run osmo-hlr_10.42.42.2(pid=654): Launched 00:22:07.279864 run osmo-stp_10.42.42.5: Starting osmo-stp 00:22:07.838743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=656): Launched 00:22:08.159102 run osmo-stp_10.42.42.5(pid=657): Launched 00:22:08.277748 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:22:08.836465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=659): Launched 00:22:08.950512 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:22:09.229127 run patchelf(pid=660): Launched 00:22:09.416069 run osmo-stp_10.42.42.5(pid=657): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=657)] 00:22:09.553268 run osmo-stp_10.42.42.5(pid=657): stdout: | (launched: 2022-12-09_00:22:08.001691) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:09.691205 run osmo-stp_10.42.42.5(pid=657): stderr: | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002208216 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:09.823533 run osmo-stp_10.42.42.5(pid=657): stdout: | (launched: 2022-12-09_00:22:08.001691) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:09.954746 run osmo-stp_10.42.42.5(pid=657): stderr: | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002208215 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002208216 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002208216 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:10.107302 run patchelf(pid=660): Terminating (SIGINT) 00:22:10.286762 run patchelf(pid=660): Terminated: ok {rc=0} 00:22:10.319355 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=657): Process ended prematurely: osmo-stp_10.42.42.5(pid=657) [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=657)] [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 00:22:10.328640 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 00:22:10.390993 run osmo-hlr_10.42.42.2(pid=654): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=654)] 00:22:10.441965 run osmo-hlr_10.42.42.2(pid=654): stdout: | (launched: 2022-12-09_00:22:07.007805) 00:22:10.493494 run osmo-hlr_10.42.42.2(pid=654): stderr: | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209002207206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209002207261 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209002207271 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209002207271 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209002207271 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:22:10.537542 run pcap-recorder_any(filters='host 10.42.42.2')(pid=653): Terminating (SIGTERM) 00:22:10.578923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=656): Terminating (SIGTERM) 00:22:10.621151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=659): Terminating (SIGTERM) 00:22:10.631243 --- ParallelTerminationStrategy: PID 653 died... 00:22:10.686908 run pcap-recorder_any(filters='host 10.42.42.2')(pid=653): Terminated: ok {rc=0} 00:22:10.697419 --- ParallelTerminationStrategy: PID 656 died... 00:22:10.752792 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=656): Terminated: ok {rc=0} 00:22:10.763396 --- ParallelTerminationStrategy: PID 659 died... 00:22:10.818651 run pcap-recorder_any(filters='host 10.42.42.6')(pid=659): Terminated: ok {rc=0} 00:22:10.905375 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=657): Process ended prematurely: osmo-stp_10.42.42.5(pid=657) [trial-2351↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=657)]