Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=27894): Process ended prematurely: osmo-stp_10.42.42.5(pid=27894) [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27894)]
Standard Output
---------------------------------------------- trial-2351 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 23:27:33.213393 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.224051 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:27:33.369505 tst cs_paging_gprs_active.py: using LAC 17487 23:27:33.485624 tst cs_paging_gprs_active.py: using RAC 147 23:27:33.610821 tst cs_paging_gprs_active.py: using CellId 17487 23:27:33.737664 tst cs_paging_gprs_active.py: using BVCI 17488 23:27:33.762345 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.773455 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.784386 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.795954 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.807438 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.819059 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.830512 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.841741 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:33.853243 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:27:33.969048 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:27:34.246867 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:27:34.372636 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:27:34.682807 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27880): Launched 23:27:34.940346 run iperf3-srv_10.42.42.10(pid=27881): Launched 23:27:35.123789 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:27:35.248658 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:27:35.559114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27882): Launched 23:27:35.823691 run iperf3-srv_10.42.42.10(pid=27885): Launched 23:27:36.007854 tst cs_paging_gprs_active.py:38: start network... 23:27:36.133144 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:27:36.606237 run create_hlr_db(pid=27888): Launched 23:27:36.778887 bus /gobi_6: Setting Powered False 23:27:37.799555 run create_hlr_db(pid=27888): Terminated: ok {rc=0} 23:27:38.225099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27890): Launched 23:27:38.545106 run osmo-hlr_10.42.42.2(pid=27891): Launched 23:27:38.667115 run osmo-stp_10.42.42.5: Starting osmo-stp 23:27:39.222234 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27893): Launched 23:27:39.541682 run osmo-stp_10.42.42.5(pid=27894): Launched 23:27:39.659356 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:27:40.219078 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27896): Launched 23:27:40.333777 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:27:40.612226 run patchelf(pid=27897): Launched 23:27:40.800097 run osmo-stp_10.42.42.5(pid=27894): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27894)] 23:27:40.937686 run osmo-stp_10.42.42.5(pid=27894): stdout: | (launched: 2022-12-08_23:27:39.385749) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:27:41.075679 run osmo-stp_10.42.42.5(pid=27894): stderr: | �[0;m�[38;5;43m20221208232739575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232739575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232739576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232739576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232739578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232739579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232739579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:27:41.209352 run osmo-stp_10.42.42.5(pid=27894): stdout: | (launched: 2022-12-08_23:27:39.385749) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:27:41.341194 run osmo-stp_10.42.42.5(pid=27894): stderr: | �[0;m�[38;5;43m20221208232739575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232739575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232739576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232739576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232739578 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232739579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232739579 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:27:41.494416 run patchelf(pid=27897): Terminating (SIGINT) 23:27:41.675257 run patchelf(pid=27897): Terminated: ok {rc=0} 23:27:41.708750 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27894): Process ended prematurely: osmo-stp_10.42.42.5(pid=27894) [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27894)] [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 23:27:41.718584 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 23:27:41.780797 run osmo-hlr_10.42.42.2(pid=27891): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27891)] 23:27:41.831807 run osmo-hlr_10.42.42.2(pid=27891): stdout: | (launched: 2022-12-08_23:27:38.388300) 23:27:41.883586 run osmo-hlr_10.42.42.2(pid=27891): stderr: | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208232738585 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208232738598 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208232738606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208232738606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208232738607 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:27:41.927477 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27880): Terminating (SIGTERM) 23:27:41.968812 run iperf3-srv_10.42.42.10(pid=27881): Terminating (SIGTERM) 23:27:42.012125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27882): Terminating (SIGTERM) 23:27:42.053534 run iperf3-srv_10.42.42.10(pid=27885): Terminating (SIGTERM) 23:27:42.095035 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27890): Terminating (SIGTERM) 23:27:42.136292 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27893): Terminating (SIGTERM) 23:27:42.177606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27896): Terminating (SIGTERM) 23:27:42.187133 --- ParallelTerminationStrategy: PID 27880 died... 23:27:42.241967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27880): Terminated: ok {rc=0} 23:27:42.251911 --- ParallelTerminationStrategy: PID 27881 died... 23:27:42.306495 run iperf3-srv_10.42.42.10(pid=27881): Terminated {rc=256} 23:27:42.316326 --- ParallelTerminationStrategy: PID 27882 died... 23:27:42.370713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27882): Terminated: ok {rc=0} 23:27:42.380542 --- ParallelTerminationStrategy: PID 27885 died... 23:27:42.434939 run iperf3-srv_10.42.42.10(pid=27885): Terminated {rc=256} 23:27:42.444759 --- ParallelTerminationStrategy: PID 27890 died... 23:27:42.499382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27890): Terminated: ok {rc=0} 23:27:42.509370 --- ParallelTerminationStrategy: PID 27893 died... 23:27:42.563859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27893): Terminated: ok {rc=0} 23:27:42.573857 --- ParallelTerminationStrategy: PID 27896 died... 23:27:42.628486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27896): Terminated: ok {rc=0} 23:27:42.714094 bus /gobi_0: Setting Powered False 23:27:43.816898 bus /gobi_0: Setting Powered False 23:27:44.927098 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27894): Process ended prematurely: osmo-stp_10.42.42.5(pid=27894) [trial-2351↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27894)]