Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=7523): Process ended prematurely: osmo-stp_10.42.42.5(pid=7523) [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7523)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 01:36:55.562601 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:55.573523 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 01:36:55.710513 tst cs_paging_gprs_active.py: using LAC 18164 01:36:55.830392 tst cs_paging_gprs_active.py: using RAC 59 01:36:55.950755 tst cs_paging_gprs_active.py: using CellId 18164 01:36:56.072664 tst cs_paging_gprs_active.py: using BVCI 18165 01:36:56.095979 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.106829 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.117411 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.128160 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.139002 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.149936 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.160841 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.171930 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 01:36:56.183057 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:36:56.301940 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 01:36:56.584702 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:36:56.713071 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:36:57.030831 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Launched 01:36:57.295914 run iperf3-srv_10.42.42.10(pid=7514): Launched 01:36:57.483071 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:36:57.611153 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:36:57.929419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7515): Launched 01:36:58.192419 run iperf3-srv_10.42.42.10(pid=7516): Launched 01:36:58.377922 tst cs_paging_gprs_active.py:38: start network... 01:36:58.504600 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:36:58.984677 run create_hlr_db(pid=7517): Launched 01:36:59.160280 bus /sierra_2: Setting Powered False 01:37:00.183069 run create_hlr_db(pid=7517): Terminated: ok {rc=0} 01:37:00.599416 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7519): Launched 01:37:01.069704 run osmo-hlr_10.42.42.2(pid=7520): Launched 01:37:01.254868 run osmo-stp_10.42.42.5: Starting osmo-stp 01:37:01.852854 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7522): Launched 01:37:02.265064 run osmo-stp_10.42.42.5(pid=7523): Launched 01:37:02.416433 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:37:02.988570 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7525): Launched 01:37:03.106485 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:37:03.393855 run patchelf(pid=7526): Launched 01:37:03.586610 run osmo-stp_10.42.42.5(pid=7523): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7523)] 01:37:03.727606 run osmo-stp_10.42.42.5(pid=7523): stdout: | (launched: 2022-12-09_01:37:02.022478) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:37:03.869723 run osmo-stp_10.42.42.5(pid=7523): stderr: | �[0;m�[38;5;43m20221209013702274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013702275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013702275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013702275 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:37:04.005861 run osmo-stp_10.42.42.5(pid=7523): stdout: | (launched: 2022-12-09_01:37:02.022478) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:37:04.140207 run osmo-stp_10.42.42.5(pid=7523): stderr: | �[0;m�[38;5;43m20221209013702274 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013702275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013702275 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013702275 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013702276 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:37:04.296901 run patchelf(pid=7526): Terminating (SIGINT) 01:37:04.482471 run patchelf(pid=7526): Terminated: ok {rc=0} 01:37:04.516236 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7523): Process ended prematurely: osmo-stp_10.42.42.5(pid=7523) [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7523)] [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 01:37:04.526143 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 01:37:04.589249 run osmo-hlr_10.42.42.2(pid=7520): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7520)] 01:37:04.640591 run osmo-hlr_10.42.42.2(pid=7520): stdout: | (launched: 2022-12-09_01:37:00.767475) 01:37:04.692622 run osmo-hlr_10.42.42.2(pid=7520): stderr: | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209013701050 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209013701066 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209013701087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209013701087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209013701087 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:37:04.737060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Terminating (SIGTERM) 01:37:04.778961 run iperf3-srv_10.42.42.10(pid=7514): Terminating (SIGTERM) 01:37:04.821008 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7515): Terminating (SIGTERM) 01:37:04.863323 run iperf3-srv_10.42.42.10(pid=7516): Terminating (SIGTERM) 01:37:04.905552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7519): Terminating (SIGTERM) 01:37:04.947487 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7522): Terminating (SIGTERM) 01:37:04.989494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7525): Terminating (SIGTERM) 01:37:04.999323 --- ParallelTerminationStrategy: PID 7513 died... 01:37:05.055713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7513): Terminated: ok {rc=0} 01:37:05.065952 --- ParallelTerminationStrategy: PID 7514 died... 01:37:05.121769 run iperf3-srv_10.42.42.10(pid=7514): Terminated {rc=256} 01:37:05.131936 --- ParallelTerminationStrategy: PID 7515 died... 01:37:05.187555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7515): Terminated: ok {rc=0} 01:37:05.197786 --- ParallelTerminationStrategy: PID 7516 died... 01:37:05.253155 run iperf3-srv_10.42.42.10(pid=7516): Terminated {rc=256} 01:37:05.263242 --- ParallelTerminationStrategy: PID 7519 died... 01:37:05.319241 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7519): Terminated: ok {rc=0} 01:37:05.329619 --- ParallelTerminationStrategy: PID 7522 died... 01:37:05.385078 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7522): Terminated: ok {rc=0} 01:37:05.395261 --- ParallelTerminationStrategy: PID 7525 died... 01:37:05.451103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7525): Terminated: ok {rc=0} 01:37:05.538630 bus /gobi_0: Setting Powered False 01:37:06.642551 bus /gobi_0: Setting Powered False 01:37:07.752999 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7523): Process ended prematurely: osmo-stp_10.42.42.5(pid=7523) [trial-2352↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7523)]