Failed
gprs:trx-umtrx+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=6201): Process ended prematurely: osmo-stp_10.42.42.5(pid=6201) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6201)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-umtrx+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 01:21:58.897018 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:58.908932 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:21:59.055082 tst ping_idle_ping.py: using LAC 18084 01:21:59.180732 tst ping_idle_ping.py: using RAC 234 01:21:59.306189 tst ping_idle_ping.py: using CellId 18084 01:21:59.431734 tst ping_idle_ping.py: using BVCI 18085 01:21:59.456495 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.467986 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.479229 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.490428 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.501714 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.513021 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.524518 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:21:59.535871 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:21:59.827695 tst ping_idle_ping.py:24: start network... 01:21:59.962424 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:22:00.480149 run create_hlr_db(pid=6195): Launched 01:22:00.668036 bus /gobi_6: Setting Powered False 01:22:01.689330 run create_hlr_db(pid=6195): Terminated: ok {rc=0} 01:22:02.114925 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6197): Launched 01:22:02.463872 run osmo-hlr_10.42.42.2(pid=6198): Launched 01:22:02.582607 run osmo-stp_10.42.42.5: Starting osmo-stp 01:22:03.143346 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6200): Launched 01:22:03.467225 run osmo-stp_10.42.42.5(pid=6201): Launched 01:22:03.583516 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:22:04.144543 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6203): Launched 01:22:04.259912 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:22:04.541131 run patchelf(pid=6204): Launched 01:22:04.729844 run osmo-stp_10.42.42.5(pid=6201): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6201)] 01:22:04.867864 run osmo-stp_10.42.42.5(pid=6201): stdout: | (launched: 2022-12-09_01:22:03.307941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:05.006179 run osmo-stp_10.42.42.5(pid=6201): stderr: | �[0;m�[38;5;43m20221209012203498 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012203498 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012203499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012203499 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:05.139380 run osmo-stp_10.42.42.5(pid=6201): stdout: | (launched: 2022-12-09_01:22:03.307941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:22:05.270997 run osmo-stp_10.42.42.5(pid=6201): stderr: | �[0;m�[38;5;43m20221209012203498 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209012203498 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209012203499 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209012203499 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209012203500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:22:05.425870 run patchelf(pid=6204): Terminating (SIGINT) 01:22:05.606944 run patchelf(pid=6204): Terminated: ok {rc=0} 01:22:05.639661 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=6201): Process ended prematurely: osmo-stp_10.42.42.5(pid=6201) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6201)] [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27] 01:22:05.648908 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 01:22:05.712102 run osmo-hlr_10.42.42.2(pid=6198): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6198)] 01:22:05.763841 run osmo-hlr_10.42.42.2(pid=6198): stdout: | (launched: 2022-12-09_01:22:02.269152) 01:22:05.816290 run osmo-hlr_10.42.42.2(pid=6198): stderr: | �[0;m�[1;31m20221209012202486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209012202486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209012202486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209012202486 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209012202487 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209012202487 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209012202503 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-umtrx+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209012202513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209012202513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209012202513 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:22:05.860902 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6197): Terminating (SIGTERM) 01:22:05.903098 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6200): Terminating (SIGTERM) 01:22:05.945714 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6203): Terminating (SIGTERM) 01:22:05.955764 --- ParallelTerminationStrategy: PID 6197 died... 01:22:06.012596 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6197): Terminated: ok {rc=0} 01:22:06.023181 --- ParallelTerminationStrategy: PID 6200 died... 01:22:06.079544 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6200): Terminated: ok {rc=0} 01:22:06.089961 --- ParallelTerminationStrategy: PID 6203 died... 01:22:06.146454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6203): Terminated: ok {rc=0} 01:22:06.234998 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6201): Process ended prematurely: osmo-stp_10.42.42.5(pid=6201) [trial-2352↪gprs:trx-umtrx+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6201)]