Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]
Standard Output
---------------------------------------------- trial-2353 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 02:39:15.655499 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:15.666589 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 02:39:15.805764 tst cs_paging_gprs_active.py: using LAC 18492 02:39:15.947362 tst cs_paging_gprs_active.py: using RAC 132 02:39:16.094709 tst cs_paging_gprs_active.py: using CellId 18492 02:39:16.232717 tst cs_paging_gprs_active.py: using BVCI 18493 02:39:16.258814 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.271158 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.283871 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.296468 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.308489 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.322142 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.335289 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.347318 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 02:39:16.360652 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 02:39:16.487556 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 02:39:16.823661 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:39:16.956742 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:17.284165 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Launched 02:39:17.543531 run iperf3-srv_10.42.42.10(pid=13001): Launched 02:39:17.727964 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:39:17.854155 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:39:18.165538 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13002): Launched 02:39:18.423613 run iperf3-srv_10.42.42.10(pid=13003): Launched 02:39:18.606613 tst cs_paging_gprs_active.py:38: start network... 02:39:18.731763 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:39:19.213088 run create_hlr_db(pid=13004): Launched 02:39:19.385506 bus /sierra_2: Setting Powered False 02:39:20.407589 run create_hlr_db(pid=13004): Terminated: ok {rc=0} 02:39:20.809331 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Launched 02:39:21.110905 run osmo-hlr_10.42.42.2(pid=13007): Launched 02:39:21.221480 run osmo-stp_10.42.42.5: Starting osmo-stp 02:39:21.742966 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Launched 02:39:22.044196 run osmo-stp_10.42.42.5(pid=13010): Launched 02:39:22.153672 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:39:22.679208 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Launched 02:39:22.786602 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:39:23.049261 run patchelf(pid=13013): Launched 02:39:23.225886 run osmo-stp_10.42.42.5(pid=13010): ERR: Terminated: ERROR {rc=1} [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)] 02:39:23.354508 run osmo-stp_10.42.42.5(pid=13010): stdout: | (launched: 2022-12-09_02:39:21.896306) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:23.483213 run osmo-stp_10.42.42.5(pid=13010): stderr: | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023922067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:23.608105 run osmo-stp_10.42.42.5(pid=13010): stdout: | (launched: 2022-12-09_02:39:21.896306) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:39:23.731841 run osmo-stp_10.42.42.5(pid=13010): stderr: | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209023922066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209023922067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209023922067 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:39:23.876087 run patchelf(pid=13013): Terminating (SIGINT) 02:39:24.045575 run patchelf(pid=13013): Terminated: ok {rc=0} 02:39:24.076738 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)] [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 02:39:24.086035 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:39:24.145187 run osmo-hlr_10.42.42.2(pid=13007): ERR: Terminated: ERROR {rc=237} [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13007)] 02:39:24.193434 run osmo-hlr_10.42.42.2(pid=13007): stdout: | (launched: 2022-12-09_02:39:20.963531) 02:39:24.242484 run osmo-hlr_10.42.42.2(pid=13007): stderr: | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209023921142 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209023921154 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2353/run.2022-12-09_02-07-59/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209023921165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209023921165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209023921165 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:39:24.284309 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminating (SIGTERM) 02:39:24.323768 run iperf3-srv_10.42.42.10(pid=13001): Terminating (SIGTERM) 02:39:24.363388 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13002): Terminating (SIGTERM) 02:39:24.402768 run iperf3-srv_10.42.42.10(pid=13003): Terminating (SIGTERM) 02:39:24.442340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Terminating (SIGTERM) 02:39:24.481691 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Terminating (SIGTERM) 02:39:24.521116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Terminating (SIGTERM) 02:39:24.530244 --- ParallelTerminationStrategy: PID 13000 died... 02:39:24.583112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13000): Terminated: ok {rc=0} 02:39:24.592595 --- ParallelTerminationStrategy: PID 13001 died... 02:39:24.644906 run iperf3-srv_10.42.42.10(pid=13001): Terminated {rc=256} 02:39:24.654385 --- ParallelTerminationStrategy: PID 13002 died... 02:39:24.706803 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13002): Terminated: ok {rc=0} 02:39:24.716223 --- ParallelTerminationStrategy: PID 13003 died... 02:39:24.768322 run iperf3-srv_10.42.42.10(pid=13003): Terminated {rc=256} 02:39:24.777853 --- ParallelTerminationStrategy: PID 13006 died... 02:39:24.830220 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13006): Terminated: ok {rc=0} 02:39:24.839597 --- ParallelTerminationStrategy: PID 13009 died... 02:39:24.892698 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13009): Terminated: ok {rc=0} 02:39:24.902368 --- ParallelTerminationStrategy: PID 13012 died... 02:39:24.955255 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13012): Terminated: ok {rc=0} 02:39:25.040186 bus /gobi_0: Setting Powered False 02:39:26.146843 bus /gobi_0: Setting Powered False 02:39:27.259373 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13010): Process ended prematurely: osmo-stp_10.42.42.5(pid=13010) [trial-2353↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13010)]