Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=1258): Process ended prematurely: osmo-stp_10.42.42.5(pid=1258) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1258)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:17:27.496304 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:27.507034 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:17:27.642960 tst cs_paging_gprs_active.py: using LAC 19510 06:17:27.762476 tst cs_paging_gprs_active.py: using RAC 130 06:17:27.877811 tst cs_paging_gprs_active.py: using CellId 19510 06:17:27.992768 tst cs_paging_gprs_active.py: using BVCI 19511 06:17:28.015491 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.026163 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.036445 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.047099 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.057670 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.068347 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.079167 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.089754 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:17:28.100451 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:17:28.217866 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:17:28.490948 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:17:28.614191 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:17:28.921049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1248): Launched 06:17:29.174945 run iperf3-srv_10.42.42.10(pid=1249): Launched 06:17:29.354191 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:17:29.477071 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:17:29.782153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1250): Launched 06:17:30.035660 run iperf3-srv_10.42.42.10(pid=1251): Launched 06:17:30.215108 tst cs_paging_gprs_active.py:38: start network... 06:17:30.337574 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:17:30.802691 run create_hlr_db(pid=1252): Launched 06:17:30.975867 bus /gobi_6: Setting Powered False 06:17:31.995225 run create_hlr_db(pid=1252): Terminated: ok {rc=0} 06:17:32.410750 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1254): Launched 06:17:32.707719 run osmo-hlr_10.42.42.2(pid=1255): Launched 06:17:32.828272 run osmo-stp_10.42.42.5: Starting osmo-stp 06:17:33.349197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1257): Launched 06:17:33.644579 run osmo-stp_10.42.42.5(pid=1258): Launched 06:17:33.752853 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:17:34.266089 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1260): Launched 06:17:34.370696 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:17:34.626536 run patchelf(pid=1261): Launched 06:17:34.801258 run osmo-stp_10.42.42.5(pid=1258): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1258)] 06:17:34.928682 run osmo-stp_10.42.42.5(pid=1258): stdout: | (launched: 2022-12-09_06:17:33.499111) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:35.056094 run osmo-stp_10.42.42.5(pid=1258): stderr: | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061733669 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:35.179320 run osmo-stp_10.42.42.5(pid=1258): stdout: | (launched: 2022-12-09_06:17:33.499111) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:17:35.301721 run osmo-stp_10.42.42.5(pid=1258): stderr: | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209061733668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209061733669 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209061733669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:17:35.443474 run patchelf(pid=1261): Terminating (SIGINT) 06:17:35.610081 run patchelf(pid=1261): Terminated: ok {rc=0} 06:17:35.640703 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1258): Process ended prematurely: osmo-stp_10.42.42.5(pid=1258) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1258)] [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:17:35.649681 tst cs_paging_gprs_active.py:38: Test FAILED (8.2 sec) 06:17:35.709790 run osmo-hlr_10.42.42.2(pid=1255): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1255)] 06:17:35.758866 run osmo-hlr_10.42.42.2(pid=1255): stdout: | (launched: 2022-12-09_06:17:32.561650) 06:17:35.809168 run osmo-hlr_10.42.42.2(pid=1255): stderr: | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209061732738 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209061732749 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209061732757 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209061732758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209061732758 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:17:35.851108 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1248): Terminating (SIGTERM) 06:17:35.890555 run iperf3-srv_10.42.42.10(pid=1249): Terminating (SIGTERM) 06:17:35.929978 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1250): Terminating (SIGTERM) 06:17:35.969558 run iperf3-srv_10.42.42.10(pid=1251): Terminating (SIGTERM) 06:17:36.009102 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1254): Terminating (SIGTERM) 06:17:36.048622 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1257): Terminating (SIGTERM) 06:17:36.088240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1260): Terminating (SIGTERM) 06:17:36.097740 --- ParallelTerminationStrategy: PID 1248 died... 06:17:36.151185 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1248): Terminated: ok {rc=0} 06:17:36.160879 --- ParallelTerminationStrategy: PID 1249 died... 06:17:36.213366 run iperf3-srv_10.42.42.10(pid=1249): Terminated {rc=256} 06:17:36.223111 --- ParallelTerminationStrategy: PID 1250 died... 06:17:36.275654 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1250): Terminated: ok {rc=0} 06:17:36.285412 --- ParallelTerminationStrategy: PID 1251 died... 06:17:36.337921 run iperf3-srv_10.42.42.10(pid=1251): Terminated {rc=256} 06:17:36.347620 --- ParallelTerminationStrategy: PID 1254 died... 06:17:36.400861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1254): Terminated: ok {rc=0} 06:17:36.410479 --- ParallelTerminationStrategy: PID 1257 died... 06:17:36.463587 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1257): Terminated: ok {rc=0} 06:17:36.473428 --- ParallelTerminationStrategy: PID 1260 died... 06:17:36.526178 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1260): Terminated: ok {rc=0} 06:17:36.608869 bus /gobi_0: Setting Powered False 06:17:37.710120 bus /gobi_0: Setting Powered False 06:17:38.818517 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1258): Process ended prematurely: osmo-stp_10.42.42.5(pid=1258) [trial-2355↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1258)]