Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32205): Process ended prematurely: osmo-stp_10.42.42.5(pid=32205) [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32205)]
Standard Output
---------------------------------------------- trial-2355 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 06:00:27.418220 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:27.429521 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 06:00:27.571306 tst cs_paging_gprs_active.py: using LAC 19419 06:00:27.693600 tst cs_paging_gprs_active.py: using RAC 39 06:00:27.809624 tst cs_paging_gprs_active.py: using CellId 19419 06:00:27.926219 tst cs_paging_gprs_active.py: using BVCI 19420 06:00:27.949302 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:27.960134 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:27.970892 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:27.981824 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:27.992473 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:28.003324 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:28.014345 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:28.025263 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 06:00:28.036195 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:00:28.154575 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 06:00:28.430077 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 06:00:28.554891 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:00:28.865412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32195): Launched 06:00:29.123335 run iperf3-srv_10.42.42.10(pid=32196): Launched 06:00:29.305812 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 06:00:29.430483 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:00:29.740195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32197): Launched 06:00:29.998229 run iperf3-srv_10.42.42.10(pid=32198): Launched 06:00:30.180324 tst cs_paging_gprs_active.py:38: start network... 06:00:30.305213 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:00:30.778484 run create_hlr_db(pid=32199): Launched 06:00:30.975941 bus /gobi_6: Setting Powered False 06:00:32.028253 run create_hlr_db(pid=32199): Terminated: ok {rc=0} 06:00:32.474384 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32201): Launched 06:00:32.774586 run osmo-hlr_10.42.42.2(pid=32202): Launched 06:00:32.892565 run osmo-stp_10.42.42.5: Starting osmo-stp 06:00:33.421432 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32204): Launched 06:00:33.720226 run osmo-stp_10.42.42.5(pid=32205): Launched 06:00:33.829618 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:00:34.350437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32207): Launched 06:00:34.456920 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:00:34.717555 run patchelf(pid=32208): Launched 06:00:34.894177 run osmo-stp_10.42.42.5(pid=32205): ERR: Terminated: ERROR {rc=1} [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32205)] 06:00:35.022419 run osmo-stp_10.42.42.5(pid=32205): stdout: | (launched: 2022-12-09_06:00:33.572941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:00:35.151074 run osmo-stp_10.42.42.5(pid=32205): stderr: | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209060033744 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:00:35.275504 run osmo-stp_10.42.42.5(pid=32205): stdout: | (launched: 2022-12-09_06:00:33.572941) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:00:35.399129 run osmo-stp_10.42.42.5(pid=32205): stderr: | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209060033743 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209060033744 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209060033744 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:00:35.542724 run patchelf(pid=32208): Terminating (SIGINT) 06:00:35.711307 run patchelf(pid=32208): Terminated: ok {rc=0} 06:00:35.742317 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32205): Process ended prematurely: osmo-stp_10.42.42.5(pid=32205) [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32205)] [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 06:00:35.751559 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 06:00:35.812054 run osmo-hlr_10.42.42.2(pid=32202): ERR: Terminated: ERROR {rc=237} [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32202)] 06:00:35.861413 run osmo-hlr_10.42.42.2(pid=32202): stdout: | (launched: 2022-12-09_06:00:32.626509) 06:00:35.911330 run osmo-hlr_10.42.42.2(pid=32202): stderr: | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209060032805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209060032818 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2355/run.2022-12-09_05-28-02/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209060032826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209060032826 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209060032827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:00:35.954080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32195): Terminating (SIGTERM) 06:00:35.994191 run iperf3-srv_10.42.42.10(pid=32196): Terminating (SIGTERM) 06:00:36.034422 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32197): Terminating (SIGTERM) 06:00:36.074868 run iperf3-srv_10.42.42.10(pid=32198): Terminating (SIGTERM) 06:00:36.115177 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32201): Terminating (SIGTERM) 06:00:36.155443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32204): Terminating (SIGTERM) 06:00:36.195471 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32207): Terminating (SIGTERM) 06:00:36.204822 --- ParallelTerminationStrategy: PID 32195 died... 06:00:36.259251 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32195): Terminated: ok {rc=0} 06:00:36.268764 --- ParallelTerminationStrategy: PID 32196 died... 06:00:36.322189 run iperf3-srv_10.42.42.10(pid=32196): Terminated {rc=256} 06:00:36.331973 --- ParallelTerminationStrategy: PID 32197 died... 06:00:36.385035 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32197): Terminated: ok {rc=0} 06:00:36.394776 --- ParallelTerminationStrategy: PID 32198 died... 06:00:36.448082 run iperf3-srv_10.42.42.10(pid=32198): Terminated {rc=256} 06:00:36.457656 --- ParallelTerminationStrategy: PID 32201 died... 06:00:36.510818 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32201): Terminated: ok {rc=0} 06:00:36.520555 --- ParallelTerminationStrategy: PID 32204 died... 06:00:36.573807 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32204): Terminated: ok {rc=0} 06:00:36.583586 --- ParallelTerminationStrategy: PID 32207 died... 06:00:36.636749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32207): Terminated: ok {rc=0} 06:00:36.720095 bus /gobi_0: Setting Powered False 06:00:37.826927 bus /gobi_0: Setting Powered False 06:00:38.936183 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32205): Process ended prematurely: osmo-stp_10.42.42.5(pid=32205) [trial-2355↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32205)]