Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7889): Process ended prematurely: osmo-stp_10.42.42.5(pid=7889) [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7889)]
Standard Output
---------------------------------------------- trial-2356 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 07:35:55.455455 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:55.467061 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 07:35:55.612693 tst cs_paging_gprs_active.py: using LAC 19924 07:35:55.739759 tst cs_paging_gprs_active.py: using RAC 34 07:35:55.866743 tst cs_paging_gprs_active.py: using CellId 19924 07:35:55.993234 tst cs_paging_gprs_active.py: using BVCI 19925 07:35:56.018361 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.029789 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.040905 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.052176 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.063306 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.074636 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.085981 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.097274 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 07:35:56.108754 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:35:56.228583 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 07:35:56.526511 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:35:56.663558 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:35:57.001393 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7879): Launched 07:35:57.283013 run iperf3-srv_10.42.42.10(pid=7880): Launched 07:35:57.483495 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:35:57.620557 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:35:57.958707 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7881): Launched 07:35:58.239445 run iperf3-srv_10.42.42.10(pid=7882): Launched 07:35:58.439197 tst cs_paging_gprs_active.py:38: start network... 07:35:58.575546 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:35:59.098984 run create_hlr_db(pid=7883): Launched 07:35:59.287272 bus /gobi_6: Setting Powered False 07:36:00.309536 run create_hlr_db(pid=7883): Terminated: ok {rc=0} 07:36:00.717302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7885): Launched 07:36:01.063099 run osmo-hlr_10.42.42.2(pid=7886): Launched 07:36:01.342374 run osmo-stp_10.42.42.5: Starting osmo-stp 07:36:02.022272 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7888): Launched 07:36:02.368166 run osmo-stp_10.42.42.5(pid=7889): Launched 07:36:02.487246 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:36:03.022587 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7891): Launched 07:36:03.130544 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:36:03.394347 run patchelf(pid=7892): Launched 07:36:03.571707 run osmo-stp_10.42.42.5(pid=7889): ERR: Terminated: ERROR {rc=1} [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7889)] 07:36:03.701450 run osmo-stp_10.42.42.5(pid=7889): stdout: | (launched: 2022-12-09_07:36:02.192243) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:36:03.831556 run osmo-stp_10.42.42.5(pid=7889): stderr: | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073602432 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:36:03.957349 run osmo-stp_10.42.42.5(pid=7889): stdout: | (launched: 2022-12-09_07:36:02.192243) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:36:04.082129 run osmo-stp_10.42.42.5(pid=7889): stderr: | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209073602431 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209073602432 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209073602432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:36:04.227120 run patchelf(pid=7892): Terminating (SIGINT) 07:36:04.398420 run patchelf(pid=7892): Terminated: ok {rc=0} 07:36:04.429729 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7889): Process ended prematurely: osmo-stp_10.42.42.5(pid=7889) [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7889)] [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 07:36:04.439016 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 07:36:04.499612 run osmo-hlr_10.42.42.2(pid=7886): ERR: Terminated: ERROR {rc=237} [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7886)] 07:36:04.548786 run osmo-hlr_10.42.42.2(pid=7886): stdout: | (launched: 2022-12-09_07:36:00.890489) 07:36:04.598347 run osmo-hlr_10.42.42.2(pid=7886): stderr: | �[0;m�[1;31m20221209073601371 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209073601372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209073601372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209073601372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209073601372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209073601373 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209073601397 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2356/run.2022-12-09_06-55-12/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209073601419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209073601419 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209073601420 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:36:04.640335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7879): Terminating (SIGTERM) 07:36:04.680098 run iperf3-srv_10.42.42.10(pid=7880): Terminating (SIGTERM) 07:36:04.720008 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7881): Terminating (SIGTERM) 07:36:04.759752 run iperf3-srv_10.42.42.10(pid=7882): Terminating (SIGTERM) 07:36:04.799733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7885): Terminating (SIGTERM) 07:36:04.839579 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7888): Terminating (SIGTERM) 07:36:04.879430 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7891): Terminating (SIGTERM) 07:36:04.889110 --- ParallelTerminationStrategy: PID 7879 died... 07:36:04.942331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7879): Terminated: ok {rc=0} 07:36:04.952115 --- ParallelTerminationStrategy: PID 7880 died... 07:36:05.004659 run iperf3-srv_10.42.42.10(pid=7880): Terminated {rc=256} 07:36:05.014157 --- ParallelTerminationStrategy: PID 7881 died... 07:36:05.066607 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7881): Terminated: ok {rc=0} 07:36:05.076244 --- ParallelTerminationStrategy: PID 7882 died... 07:36:05.128940 run iperf3-srv_10.42.42.10(pid=7882): Terminated {rc=256} 07:36:05.138496 --- ParallelTerminationStrategy: PID 7885 died... 07:36:05.191916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7885): Terminated: ok {rc=0} 07:36:05.201865 --- ParallelTerminationStrategy: PID 7888 died... 07:36:05.254790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7888): Terminated: ok {rc=0} 07:36:05.264545 --- ParallelTerminationStrategy: PID 7891 died... 07:36:05.317009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7891): Terminated: ok {rc=0} 07:36:05.405463 bus /gobi_0: Setting Powered False 07:36:06.509207 bus /gobi_0: Setting Powered False 07:36:07.616752 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7889): Process ended prematurely: osmo-stp_10.42.42.5(pid=7889) [trial-2356↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7889)]