Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=20894): Process ended prematurely: osmo-stp_10.42.42.5(pid=20894) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20894)]
Standard Output
---------------------------------------------- trial-2357 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 09:35:39.039450 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.051360 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:35:39.189564 tst cs_paging_gprs_active.py: using LAC 20555 09:35:39.307289 tst cs_paging_gprs_active.py: using RAC 155 09:35:39.427124 tst cs_paging_gprs_active.py: using CellId 20555 09:35:39.549439 tst cs_paging_gprs_active.py: using BVCI 20556 09:35:39.572517 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.583940 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.595291 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.606751 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.618112 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.629434 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.641053 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.652534 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:35:39.664373 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:35:39.785885 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:35:40.065345 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:35:40.191673 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:35:40.505189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20884): Launched 09:35:40.767063 run iperf3-srv_10.42.42.10(pid=20885): Launched 09:35:40.951783 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:35:41.078211 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:35:41.393967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20886): Launched 09:35:41.655556 run iperf3-srv_10.42.42.10(pid=20887): Launched 09:35:41.840293 tst cs_paging_gprs_active.py:38: start network... 09:35:41.966814 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:35:42.455398 run create_hlr_db(pid=20888): Launched 09:35:42.630635 bus /gobi_6: Setting Powered False 09:35:43.663114 run create_hlr_db(pid=20888): Terminated: ok {rc=0} 09:35:44.070707 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20890): Launched 09:35:44.376129 run osmo-hlr_10.42.42.2(pid=20891): Launched 09:35:44.496642 run osmo-stp_10.42.42.5: Starting osmo-stp 09:35:45.031705 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20893): Launched 09:35:45.336365 run osmo-stp_10.42.42.5(pid=20894): Launched 09:35:45.457119 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:35:46.021361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20896): Launched 09:35:46.131797 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:35:46.459583 run patchelf(pid=20897): Launched 09:35:46.655146 run osmo-stp_10.42.42.5(pid=20894): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20894)] 09:35:46.788741 run osmo-stp_10.42.42.5(pid=20894): stdout: | (launched: 2022-12-09_09:35:45.186335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:46.921750 run osmo-stp_10.42.42.5(pid=20894): stderr: | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093545360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:47.049856 run osmo-stp_10.42.42.5(pid=20894): stdout: | (launched: 2022-12-09_09:35:45.186335) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:35:47.177904 run osmo-stp_10.42.42.5(pid=20894): stderr: | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093545360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093545360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093545361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:35:47.325112 run patchelf(pid=20897): Terminating (SIGINT) 09:35:47.495554 run patchelf(pid=20897): Terminated: ok {rc=0} 09:35:47.527062 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=20894): Process ended prematurely: osmo-stp_10.42.42.5(pid=20894) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20894)] [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 09:35:47.536307 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 09:35:47.596268 run osmo-hlr_10.42.42.2(pid=20891): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20891)] 09:35:47.645359 run osmo-hlr_10.42.42.2(pid=20891): stdout: | (launched: 2022-12-09_09:35:44.226603) 09:35:47.695085 run osmo-hlr_10.42.42.2(pid=20891): stderr: | �[0;m�[1;31m20221209093544403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209093544403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209093544403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209093544403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209093544403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209093544404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209093544414 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209093544423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209093544423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209093544423 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:35:47.737485 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20884): Terminating (SIGTERM) 09:35:47.777271 run iperf3-srv_10.42.42.10(pid=20885): Terminating (SIGTERM) 09:35:47.817500 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20886): Terminating (SIGTERM) 09:35:47.857340 run iperf3-srv_10.42.42.10(pid=20887): Terminating (SIGTERM) 09:35:47.897200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20890): Terminating (SIGTERM) 09:35:47.937096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20893): Terminating (SIGTERM) 09:35:47.976890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20896): Terminating (SIGTERM) 09:35:47.986061 --- ParallelTerminationStrategy: PID 20884 died... 09:35:48.039517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20884): Terminated: ok {rc=0} 09:35:48.048908 --- ParallelTerminationStrategy: PID 20885 died... 09:35:48.102262 run iperf3-srv_10.42.42.10(pid=20885): Terminated {rc=256} 09:35:48.111839 --- ParallelTerminationStrategy: PID 20886 died... 09:35:48.164463 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20886): Terminated: ok {rc=0} 09:35:48.173991 --- ParallelTerminationStrategy: PID 20887 died... 09:35:48.226747 run iperf3-srv_10.42.42.10(pid=20887): Terminated {rc=256} 09:35:48.236290 --- ParallelTerminationStrategy: PID 20890 died... 09:35:48.288941 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20890): Terminated: ok {rc=0} 09:35:48.298369 --- ParallelTerminationStrategy: PID 20893 died... 09:35:48.351105 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20893): Terminated: ok {rc=0} 09:35:48.360587 --- ParallelTerminationStrategy: PID 20896 died... 09:35:48.413582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20896): Terminated: ok {rc=0} 09:35:48.501104 bus /gobi_0: Setting Powered False 09:35:49.604132 bus /gobi_0: Setting Powered False 09:35:50.715354 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20894): Process ended prematurely: osmo-stp_10.42.42.5(pid=20894) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20894)]