Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=16119): Process ended prematurely: osmo-stp_10.42.42.5(pid=16119) [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16119)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:47:16.532090 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:16.547281 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:47:16.755089 tst cs_paging_gprs_active.py: using LAC 20299 08:47:16.880361 tst cs_paging_gprs_active.py: using RAC 154 08:47:17.041441 tst cs_paging_gprs_active.py: using CellId 20299 08:47:17.214033 tst cs_paging_gprs_active.py: using BVCI 20300 08:47:17.239982 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.252702 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.265135 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.277011 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.289070 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.301514 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.314200 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.327535 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:47:17.339309 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:47:17.462363 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:47:17.750681 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:47:17.880585 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:18.202362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16109): Launched 08:47:18.469319 run iperf3-srv_10.42.42.10(pid=16110): Launched 08:47:18.658894 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:47:18.787864 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:19.108937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16111): Launched 08:47:19.377660 run iperf3-srv_10.42.42.10(pid=16112): Launched 08:47:19.567140 tst cs_paging_gprs_active.py:38: start network... 08:47:19.696588 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:47:20.195453 run create_hlr_db(pid=16113): Launched 08:47:20.375026 bus /gobi_6: Setting Powered False 08:47:21.396148 run create_hlr_db(pid=16113): Terminated: ok {rc=0} 08:47:21.838639 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16115): Launched 08:47:22.173359 run osmo-hlr_10.42.42.2(pid=16116): Launched 08:47:22.296658 run osmo-stp_10.42.42.5: Starting osmo-stp 08:47:22.874507 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16118): Launched 08:47:23.207113 run osmo-stp_10.42.42.5(pid=16119): Launched 08:47:23.328374 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:47:23.907758 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16121): Launched 08:47:24.026850 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:47:24.316110 run patchelf(pid=16122): Launched 08:47:24.510057 run osmo-stp_10.42.42.5(pid=16119): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16119)] 08:47:24.651841 run osmo-stp_10.42.42.5(pid=16119): stdout: | (launched: 2022-12-09_08:47:23.044740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:24.793703 run osmo-stp_10.42.42.5(pid=16119): stderr: | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084723235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:24.931248 run osmo-stp_10.42.42.5(pid=16119): stdout: | (launched: 2022-12-09_08:47:23.044740) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:25.067503 run osmo-stp_10.42.42.5(pid=16119): stderr: | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084723235 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084723235 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084723236 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:25.225808 run patchelf(pid=16122): Terminating (SIGINT) 08:47:25.411431 run patchelf(pid=16122): Terminated: ok {rc=0} 08:47:25.445731 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16119): Process ended prematurely: osmo-stp_10.42.42.5(pid=16119) [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16119)] [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:47:25.455828 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 08:47:25.520110 run osmo-hlr_10.42.42.2(pid=16116): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16116)] 08:47:25.572588 run osmo-hlr_10.42.42.2(pid=16116): stdout: | (launched: 2022-12-09_08:47:22.009403) 08:47:25.625636 run osmo-hlr_10.42.42.2(pid=16116): stderr: | �[0;m�[1;31m20221209084722206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209084722206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209084722206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209084722206 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209084722207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209084722207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209084722219 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209084722228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209084722229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209084722229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:47:25.671210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16109): Terminating (SIGTERM) 08:47:25.714077 run iperf3-srv_10.42.42.10(pid=16110): Terminating (SIGTERM) 08:47:25.756580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16111): Terminating (SIGTERM) 08:47:25.799762 run iperf3-srv_10.42.42.10(pid=16112): Terminating (SIGTERM) 08:47:25.842874 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16115): Terminating (SIGTERM) 08:47:25.885641 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16118): Terminating (SIGTERM) 08:47:25.929392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16121): Terminating (SIGTERM) 08:47:25.939242 --- ParallelTerminationStrategy: PID 16109 died... 08:47:25.996799 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16109): Terminated: ok {rc=0} 08:47:26.007133 --- ParallelTerminationStrategy: PID 16110 died... 08:47:26.063886 run iperf3-srv_10.42.42.10(pid=16110): Terminated {rc=256} 08:47:26.074381 --- ParallelTerminationStrategy: PID 16111 died... 08:47:26.131590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16111): Terminated: ok {rc=0} 08:47:26.141943 --- ParallelTerminationStrategy: PID 16112 died... 08:47:26.198790 run iperf3-srv_10.42.42.10(pid=16112): Terminated {rc=256} 08:47:26.208934 --- ParallelTerminationStrategy: PID 16115 died... 08:47:26.265986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16115): Terminated: ok {rc=0} 08:47:26.276231 --- ParallelTerminationStrategy: PID 16118 died... 08:47:26.333174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16118): Terminated: ok {rc=0} 08:47:26.343295 --- ParallelTerminationStrategy: PID 16121 died... 08:47:26.400205 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16121): Terminated: ok {rc=0} 08:47:26.488316 bus /gobi_0: Setting Powered False 08:47:27.596729 bus /gobi_0: Setting Powered False 08:47:28.706135 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16119): Process ended prematurely: osmo-stp_10.42.42.5(pid=16119) [trial-2357↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16119)]