Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16050): Process ended prematurely: osmo-stp_10.42.42.5(pid=16050) [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16050)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:46:15.602768 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:15.614353 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:46:15.763551 tst cs_paging_gprs_active.py: using LAC 20294 08:46:15.918955 tst cs_paging_gprs_active.py: using RAC 149 08:46:16.078846 tst cs_paging_gprs_active.py: using CellId 20294 08:46:16.221983 tst cs_paging_gprs_active.py: using BVCI 20295 08:46:16.248845 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.261468 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.274236 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.287062 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.300100 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.313170 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.326296 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.341544 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:46:16.355469 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:46:16.479020 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:46:16.820085 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:46:16.964031 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:46:17.319067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16040): Launched 08:46:17.605446 run iperf3-srv_10.42.42.10(pid=16041): Launched 08:46:17.810816 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:46:17.951282 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:46:18.295797 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16042): Launched 08:46:18.580579 run iperf3-srv_10.42.42.10(pid=16043): Launched 08:46:18.784630 tst cs_paging_gprs_active.py:38: start network... 08:46:18.924660 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:46:19.448827 run create_hlr_db(pid=16044): Launched 08:46:19.641067 bus /gobi_6: Setting Powered False 08:46:20.662171 run create_hlr_db(pid=16044): Terminated: ok {rc=0} 08:46:21.102303 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16046): Launched 08:46:21.435103 run osmo-hlr_10.42.42.2(pid=16047): Launched 08:46:21.560526 run osmo-stp_10.42.42.5: Starting osmo-stp 08:46:22.137676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16049): Launched 08:46:22.471268 run osmo-stp_10.42.42.5(pid=16050): Launched 08:46:22.592176 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:46:23.170469 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16052): Launched 08:46:23.289411 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:46:23.578881 run patchelf(pid=16053): Launched 08:46:23.773002 run osmo-stp_10.42.42.5(pid=16050): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16050)] 08:46:23.915362 run osmo-stp_10.42.42.5(pid=16050): stdout: | (launched: 2022-12-09_08:46:22.306678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:46:24.057627 run osmo-stp_10.42.42.5(pid=16050): stderr: | �[0;m�[38;5;43m20221209084622495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084622495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084622496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084622496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084622496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084622496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084622497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:46:24.195406 run osmo-stp_10.42.42.5(pid=16050): stdout: | (launched: 2022-12-09_08:46:22.306678) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:46:24.332071 run osmo-stp_10.42.42.5(pid=16050): stderr: | �[0;m�[38;5;43m20221209084622495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084622495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084622496 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084622496 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084622496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084622496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084622497 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:46:24.491032 run patchelf(pid=16053): Terminating (SIGINT) 08:46:24.677543 run patchelf(pid=16053): Terminated: ok {rc=0} 08:46:24.711501 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16050): Process ended prematurely: osmo-stp_10.42.42.5(pid=16050) [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16050)] [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:46:24.721412 tst cs_paging_gprs_active.py:38: Test FAILED (9.2 sec) 08:46:24.785130 run osmo-hlr_10.42.42.2(pid=16047): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16047)] 08:46:24.836984 run osmo-hlr_10.42.42.2(pid=16047): stdout: | (launched: 2022-12-09_08:46:21.271789) 08:46:24.890047 run osmo-hlr_10.42.42.2(pid=16047): stderr: | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209084621467 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209084621480 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209084621489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209084621489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209084621489 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:46:24.935089 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16040): Terminating (SIGTERM) 08:46:24.977480 run iperf3-srv_10.42.42.10(pid=16041): Terminating (SIGTERM) 08:46:25.019958 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16042): Terminating (SIGTERM) 08:46:25.062765 run iperf3-srv_10.42.42.10(pid=16043): Terminating (SIGTERM) 08:46:25.105524 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16046): Terminating (SIGTERM) 08:46:25.147652 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16049): Terminating (SIGTERM) 08:46:25.190054 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16052): Terminating (SIGTERM) 08:46:25.199742 --- ParallelTerminationStrategy: PID 16040 died... 08:46:25.256556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16040): Terminated: ok {rc=0} 08:46:25.266777 --- ParallelTerminationStrategy: PID 16041 died... 08:46:25.323004 run iperf3-srv_10.42.42.10(pid=16041): Terminated {rc=256} 08:46:25.332942 --- ParallelTerminationStrategy: PID 16042 died... 08:46:25.389158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16042): Terminated: ok {rc=0} 08:46:25.399188 --- ParallelTerminationStrategy: PID 16043 died... 08:46:25.454920 run iperf3-srv_10.42.42.10(pid=16043): Terminated {rc=256} 08:46:25.465329 --- ParallelTerminationStrategy: PID 16046 died... 08:46:25.521604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16046): Terminated: ok {rc=0} 08:46:25.531673 --- ParallelTerminationStrategy: PID 16049 died... 08:46:25.587752 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16049): Terminated: ok {rc=0} 08:46:25.597960 --- ParallelTerminationStrategy: PID 16052 died... 08:46:25.654346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16052): Terminated: ok {rc=0} 08:46:25.742179 bus /gobi_0: Setting Powered False 08:46:26.849285 bus /gobi_0: Setting Powered False 08:46:27.961939 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16050): Process ended prematurely: osmo-stp_10.42.42.5(pid=16050) [trial-2357↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16050)]