Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18092): Process ended prematurely: osmo-stp_10.42.42.5(pid=18092) [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18092)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:03:33.691548 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:33.702599 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:03:33.843768 tst cs_paging_gprs_active.py: using LAC 20385 09:03:33.973554 tst cs_paging_gprs_active.py: using RAC 240 09:03:34.094801 tst cs_paging_gprs_active.py: using CellId 20385 09:03:34.215280 tst cs_paging_gprs_active.py: using BVCI 20386 09:03:34.239172 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.250215 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.261043 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.271865 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.282591 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.293322 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.304284 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.315121 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:03:34.326276 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:03:34.448710 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:03:34.736409 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:03:34.866122 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:03:35.186381 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18082): Launched 09:03:35.452541 run iperf3-srv_10.42.42.10(pid=18083): Launched 09:03:35.642118 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:03:35.771790 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:03:36.093926 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18084): Launched 09:03:36.360443 run iperf3-srv_10.42.42.10(pid=18085): Launched 09:03:36.549580 tst cs_paging_gprs_active.py:38: start network... 09:03:36.678966 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:03:37.176942 run create_hlr_db(pid=18086): Launched 09:03:37.354925 bus /gobi_6: Setting Powered False 09:03:38.377128 run create_hlr_db(pid=18086): Terminated: ok {rc=0} 09:03:38.817106 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18088): Launched 09:03:39.151906 run osmo-hlr_10.42.42.2(pid=18089): Launched 09:03:39.272329 run osmo-stp_10.42.42.5: Starting osmo-stp 09:03:39.850315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18091): Launched 09:03:40.172833 run osmo-stp_10.42.42.5(pid=18092): Launched 09:03:40.286195 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:03:40.827654 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18094): Launched 09:03:40.938816 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:03:41.208628 run patchelf(pid=18095): Launched 09:03:41.389454 run osmo-stp_10.42.42.5(pid=18092): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18092)] 09:03:41.521465 run osmo-stp_10.42.42.5(pid=18092): stdout: | (launched: 2022-12-09_09:03:40.017741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:03:41.653598 run osmo-stp_10.42.42.5(pid=18092): stderr: | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209090340184 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:03:41.781411 run osmo-stp_10.42.42.5(pid=18092): stdout: | (launched: 2022-12-09_09:03:40.017741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:03:41.908311 run osmo-stp_10.42.42.5(pid=18092): stderr: | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209090340183 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209090340184 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209090340184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:03:42.056340 run patchelf(pid=18095): Terminating (SIGINT) 09:03:42.230194 run patchelf(pid=18095): Terminated: ok {rc=0} 09:03:42.261979 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18092): Process ended prematurely: osmo-stp_10.42.42.5(pid=18092) [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18092)] [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:03:42.271085 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 09:03:42.331485 run osmo-hlr_10.42.42.2(pid=18089): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18089)] 09:03:42.380696 run osmo-hlr_10.42.42.2(pid=18089): stdout: | (launched: 2022-12-09_09:03:38.986772) 09:03:42.430578 run osmo-hlr_10.42.42.2(pid=18089): stderr: | �[0;m�[1;31m20221209090339182 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209090339183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209090339183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209090339183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209090339183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209090339183 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209090339196 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209090339206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209090339206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209090339206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:03:42.473218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18082): Terminating (SIGTERM) 09:03:42.513290 run iperf3-srv_10.42.42.10(pid=18083): Terminating (SIGTERM) 09:03:42.553409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18084): Terminating (SIGTERM) 09:03:42.593468 run iperf3-srv_10.42.42.10(pid=18085): Terminating (SIGTERM) 09:03:42.633551 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18088): Terminating (SIGTERM) 09:03:42.673503 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18091): Terminating (SIGTERM) 09:03:42.713370 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18094): Terminating (SIGTERM) 09:03:42.722669 --- ParallelTerminationStrategy: PID 18082 died... 09:03:42.776358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18082): Terminated: ok {rc=0} 09:03:42.786149 --- ParallelTerminationStrategy: PID 18083 died... 09:03:42.839457 run iperf3-srv_10.42.42.10(pid=18083): Terminated {rc=256} 09:03:42.849167 --- ParallelTerminationStrategy: PID 18084 died... 09:03:42.902517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18084): Terminated: ok {rc=0} 09:03:42.912233 --- ParallelTerminationStrategy: PID 18085 died... 09:03:42.966025 run iperf3-srv_10.42.42.10(pid=18085): Terminated {rc=256} 09:03:42.975830 --- ParallelTerminationStrategy: PID 18088 died... 09:03:43.029335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18088): Terminated: ok {rc=0} 09:03:43.039114 --- ParallelTerminationStrategy: PID 18091 died... 09:03:43.092921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18091): Terminated: ok {rc=0} 09:03:43.102866 --- ParallelTerminationStrategy: PID 18094 died... 09:03:43.156241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18094): Terminated: ok {rc=0} 09:03:43.244913 bus /gobi_0: Setting Powered False 09:03:44.350173 bus /gobi_0: Setting Powered False 09:03:45.462612 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18092): Process ended prematurely: osmo-stp_10.42.42.5(pid=18092) [trial-2357↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18092)]