Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=29470): Process ended prematurely: osmo-stp_10.42.42.5(pid=29470) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29470)]
Standard Output
---------------------------------------------- trial-2358 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 11:03:32.460513 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:32.472519 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 11:03:32.610932 tst iperf3m4.py: using LAC 21018 11:03:32.738401 tst iperf3m4.py: using RAC 108 11:03:32.865000 tst iperf3m4.py: using CellId 21018 11:03:32.993651 tst iperf3m4.py: using BVCI 21019 11:03:33.018651 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.030773 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.042833 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.055286 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.068209 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.080240 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.092150 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.104085 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 11:03:33.117098 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:03:33.234099 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:03:33.354981 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:03:33.471396 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 11:03:33.764885 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 11:03:33.899895 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:34.234565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Launched 11:03:34.514077 run iperf3-srv_10.42.42.10(pid=29457): Launched 11:03:34.710879 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 11:03:34.845441 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:35.181281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Launched 11:03:35.460077 run iperf3-srv_10.42.42.10(pid=29459): Launched 11:03:35.656413 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 11:03:35.790854 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:36.126755 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29460): Launched 11:03:36.405916 run iperf3-srv_10.42.42.10(pid=29461): Launched 11:03:36.602092 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 11:03:36.736271 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:03:37.069792 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29462): Launched 11:03:37.349074 run iperf3-srv_10.42.42.10(pid=29463): Launched 11:03:37.547687 tst iperf3m4.py:8: start network... 11:03:37.682244 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:03:38.190339 run create_hlr_db(pid=29464): Launched 11:03:38.375336 bus /gobi_6: Setting Powered False 11:03:39.397854 run create_hlr_db(pid=29464): Terminated: ok {rc=0} 11:03:39.827624 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29466): Launched 11:03:40.142380 run osmo-hlr_10.42.42.2(pid=29467): Launched 11:03:40.253776 run osmo-stp_10.42.42.5: Starting osmo-stp 11:03:40.778233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29469): Launched 11:03:41.081526 run osmo-stp_10.42.42.5(pid=29470): Launched 11:03:41.190657 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:03:41.717465 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29472): Launched 11:03:41.824265 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:03:42.087071 run patchelf(pid=29473): Launched 11:03:42.262969 run osmo-stp_10.42.42.5(pid=29470): ERR: Terminated: ERROR {rc=1} [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29470)] 11:03:42.391208 run osmo-stp_10.42.42.5(pid=29470): stdout: | (launched: 2022-12-09_11:03:40.931708) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:42.519678 run osmo-stp_10.42.42.5(pid=29470): stderr: | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209110341101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209110341101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209110341102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209110341102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:42.643800 run osmo-stp_10.42.42.5(pid=29470): stdout: | (launched: 2022-12-09_11:03:40.931708) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:03:42.766812 run osmo-stp_10.42.42.5(pid=29470): stderr: | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209110341100 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209110341101 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209110341101 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209110341102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209110341102 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:03:42.910127 run patchelf(pid=29473): Terminating (SIGINT) 11:03:43.078487 run patchelf(pid=29473): Terminated: ok {rc=0} 11:03:43.109625 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29470): Process ended prematurely: osmo-stp_10.42.42.5(pid=29470) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29470)] [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 11:03:43.119398 tst iperf3m4.py:8: Test FAILED (10.7 sec) 11:03:43.179568 run osmo-hlr_10.42.42.2(pid=29467): ERR: Terminated: ERROR {rc=237} [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29467)] 11:03:43.228233 run osmo-hlr_10.42.42.2(pid=29467): stdout: | (launched: 2022-12-09_11:03:39.991353) 11:03:43.277480 run osmo-hlr_10.42.42.2(pid=29467): stderr: | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209110340161 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209110340173 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2358/run.2022-12-09_09-50-18/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209110340181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209110340181 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209110340182 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:03:43.319060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Terminating (SIGTERM) 11:03:43.358336 run iperf3-srv_10.42.42.10(pid=29457): Terminating (SIGTERM) 11:03:43.397476 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Terminating (SIGTERM) 11:03:43.436605 run iperf3-srv_10.42.42.10(pid=29459): Terminating (SIGTERM) 11:03:43.475879 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29460): Terminating (SIGTERM) 11:03:43.515087 run iperf3-srv_10.42.42.10(pid=29461): Terminating (SIGTERM) 11:03:43.554362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29462): Terminating (SIGTERM) 11:03:43.593585 run iperf3-srv_10.42.42.10(pid=29463): Terminating (SIGTERM) 11:03:43.633100 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29466): Terminating (SIGTERM) 11:03:43.672565 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29469): Terminating (SIGTERM) 11:03:43.712198 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29472): Terminating (SIGTERM) 11:03:43.721458 --- ParallelTerminationStrategy: PID 29456 died... 11:03:43.774629 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29456): Terminated: ok {rc=0} 11:03:43.784203 --- ParallelTerminationStrategy: PID 29457 died... 11:03:43.837197 run iperf3-srv_10.42.42.10(pid=29457): Terminated {rc=256} 11:03:43.846659 --- ParallelTerminationStrategy: PID 29458 died... 11:03:43.900188 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29458): Terminated: ok {rc=0} 11:03:43.909656 --- ParallelTerminationStrategy: PID 29459 died... 11:03:43.962656 run iperf3-srv_10.42.42.10(pid=29459): Terminated {rc=256} 11:03:43.972385 --- ParallelTerminationStrategy: PID 29460 died... 11:03:44.025240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29460): Terminated: ok {rc=0} 11:03:44.034956 --- ParallelTerminationStrategy: PID 29461 died... 11:03:44.087933 run iperf3-srv_10.42.42.10(pid=29461): Terminated {rc=256} 11:03:44.097971 --- ParallelTerminationStrategy: PID 29462 died... 11:03:44.150832 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29462): Terminated: ok {rc=0} 11:03:44.160531 --- ParallelTerminationStrategy: PID 29463 died... 11:03:44.213800 run iperf3-srv_10.42.42.10(pid=29463): Terminated {rc=256} 11:03:44.223451 --- ParallelTerminationStrategy: PID 29466 died... 11:03:44.276302 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29466): Terminated: ok {rc=0} 11:03:44.285980 --- ParallelTerminationStrategy: PID 29469 died... 11:03:44.338942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29469): Terminated: ok {rc=0} 11:03:44.348716 --- ParallelTerminationStrategy: PID 29472 died... 11:03:44.401687 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29472): Terminated: ok {rc=0} 11:03:44.490943 bus /gobi_4: Setting Powered False 11:03:45.595621 bus /gobi_4: Setting Powered False 11:03:46.705028 bus /gobi_1: Setting Powered False 11:03:47.804403 bus /gobi_1: Setting Powered False 11:03:48.917495 bus /gobi_0: Setting Powered False 11:03:50.020306 bus /gobi_0: Setting Powered False 11:03:51.132320 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29470): Process ended prematurely: osmo-stp_10.42.42.5(pid=29470) [trial-2358↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29470)]