Failed
gprs:trx-umtrx.cs_paging_gprs_active.py (from gprs_trx-umtrx)
Stacktrace
osmo-stp_10.42.42.5(pid=2713): Process ended prematurely: osmo-stp_10.42.42.5(pid=2713) [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2713)]
Standard Output
---------------------------------------------- trial-2359 gprs:trx-umtrx cs_paging_gprs_active.py ---------------------------------------------- 11:57:42.688089 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:42.699175 tst gprs:trx-umtrx: Using 1 x bts (candidates: 1) 11:57:42.845169 tst cs_paging_gprs_active.py: using LAC 21302 11:57:42.975688 tst cs_paging_gprs_active.py: using RAC 137 11:57:43.105550 tst cs_paging_gprs_active.py: using CellId 21302 11:57:43.235512 tst cs_paging_gprs_active.py: using BVCI 21303 11:57:43.260800 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.271989 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.283025 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.294734 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.306189 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.316920 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.327972 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.339066 tst gprs:trx-umtrx: Using 1 x ip_address (candidates: 9) 11:57:43.350425 tst gprs:trx-umtrx: Using 1 x modem (candidates: 4) 11:57:43.469742 tst gprs:trx-umtrx: Using 1 x modem (candidates: 4) 11:57:43.756002 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:57:43.884012 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:57:44.201829 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2703): Launched 11:57:44.466467 run iperf3-srv_10.42.42.10(pid=2704): Launched 11:57:44.653485 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:57:44.780939 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:57:45.098857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2705): Launched 11:57:45.363813 run iperf3-srv_10.42.42.10(pid=2706): Launched 11:57:45.550059 tst cs_paging_gprs_active.py:38: start network... 11:57:45.677247 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:57:46.208454 run create_hlr_db(pid=2707): Launched 11:57:46.406475 bus /sierra_2: Setting Powered False 11:57:47.421000 run create_hlr_db(pid=2707): Terminated: ok {rc=0} 11:57:47.837398 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2709): Launched 11:57:48.144588 run osmo-hlr_10.42.42.2(pid=2710): Launched 11:57:48.258748 run osmo-stp_10.42.42.5: Starting osmo-stp 11:57:48.791057 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2712): Launched 11:57:49.098931 run osmo-stp_10.42.42.5(pid=2713): Launched 11:57:49.209805 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:57:49.742970 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2715): Launched 11:57:49.851541 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:57:50.127836 run patchelf(pid=2716): Launched 11:57:50.320294 run osmo-stp_10.42.42.5(pid=2713): ERR: Terminated: ERROR {rc=1} [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2713)] 11:57:50.460265 run osmo-stp_10.42.42.5(pid=2713): stdout: | (launched: 2022-12-09_11:57:48.947287) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:50.601592 run osmo-stp_10.42.42.5(pid=2713): stderr: | �[0;m�[38;5;43m20221209115749115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115749115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115749116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115749116 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115749116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115749117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115749117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:50.738124 run osmo-stp_10.42.42.5(pid=2713): stdout: | (launched: 2022-12-09_11:57:48.947287) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:57:50.873064 run osmo-stp_10.42.42.5(pid=2713): stderr: | �[0;m�[38;5;43m20221209115749115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209115749115 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209115749116 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209115749116 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209115749116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209115749117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209115749117 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:57:51.031104 run patchelf(pid=2716): Terminating (SIGINT) 11:57:51.217164 run patchelf(pid=2716): Terminated: ok {rc=0} 11:57:51.251060 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2713): Process ended prematurely: osmo-stp_10.42.42.5(pid=2713) [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2713)] [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38] 11:57:51.260715 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 11:57:51.325041 run osmo-hlr_10.42.42.2(pid=2710): ERR: Terminated: ERROR {rc=237} [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2710)] 11:57:51.376921 run osmo-hlr_10.42.42.2(pid=2710): stdout: | (launched: 2022-12-09_11:57:47.992596) 11:57:51.429436 run osmo-hlr_10.42.42.2(pid=2710): stderr: | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209115748166 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209115748178 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2359/run.2022-12-09_11-17-44/gprs:trx-umtrx/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209115748186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209115748186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209115748186 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:57:51.473879 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2703): Terminating (SIGTERM) 11:57:51.516409 run iperf3-srv_10.42.42.10(pid=2704): Terminating (SIGTERM) 11:57:51.558856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2705): Terminating (SIGTERM) 11:57:51.601051 run iperf3-srv_10.42.42.10(pid=2706): Terminating (SIGTERM) 11:57:51.643807 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2709): Terminating (SIGTERM) 11:57:51.685800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2712): Terminating (SIGTERM) 11:57:51.728200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2715): Terminating (SIGTERM) 11:57:51.738320 --- ParallelTerminationStrategy: PID 2703 died... 11:57:51.795145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2703): Terminated: ok {rc=0} 11:57:51.805405 --- ParallelTerminationStrategy: PID 2704 died... 11:57:51.861407 run iperf3-srv_10.42.42.10(pid=2704): Terminated {rc=256} 11:57:51.871853 --- ParallelTerminationStrategy: PID 2705 died... 11:57:51.929888 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2705): Terminated: ok {rc=0} 11:57:51.940807 --- ParallelTerminationStrategy: PID 2706 died... 11:57:51.997438 run iperf3-srv_10.42.42.10(pid=2706): Terminated {rc=256} 11:57:52.007942 --- ParallelTerminationStrategy: PID 2709 died... 11:57:52.064492 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2709): Terminated: ok {rc=0} 11:57:52.074786 --- ParallelTerminationStrategy: PID 2712 died... 11:57:52.131380 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2712): Terminated: ok {rc=0} 11:57:52.141976 --- ParallelTerminationStrategy: PID 2715 died... 11:57:52.198512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2715): Terminated: ok {rc=0} 11:57:52.285911 bus /gobi_0: Setting Powered False 11:57:53.390099 bus /gobi_0: Setting Powered False 11:57:54.501471 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2713): Process ended prematurely: osmo-stp_10.42.42.5(pid=2713) [trial-2359↪gprs:trx-umtrx↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2713)]