Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=12243): Process ended prematurely: osmo-stp_10.42.42.5(pid=12243) [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12243)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 13:42:25.191492 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.202773 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 13:42:25.341854 tst cs_paging_gprs_active.py: using LAC 21852 13:42:25.468847 tst cs_paging_gprs_active.py: using RAC 177 13:42:25.593601 tst cs_paging_gprs_active.py: using CellId 21852 13:42:25.718322 tst cs_paging_gprs_active.py: using BVCI 21853 13:42:25.742966 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.754271 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.765228 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.776794 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.788023 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.799234 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.810580 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.821668 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 13:42:25.833047 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 13:42:25.950477 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 13:42:26.243981 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:42:26.378864 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:42:26.713330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12233): Launched 13:42:26.990726 run iperf3-srv_10.42.42.10(pid=12234): Launched 13:42:27.188638 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:42:27.323569 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:42:27.657095 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12235): Launched 13:42:27.935750 run iperf3-srv_10.42.42.10(pid=12236): Launched 13:42:28.133167 tst cs_paging_gprs_active.py:38: start network... 13:42:28.267891 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:42:28.778220 run create_hlr_db(pid=12237): Launched 13:42:28.964386 bus /sierra_2: Setting Powered False 13:42:29.985853 run create_hlr_db(pid=12237): Terminated: ok {rc=0} 13:42:30.416669 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12239): Launched 13:42:30.740878 run osmo-hlr_10.42.42.2(pid=12240): Launched 13:42:30.916142 run osmo-stp_10.42.42.5: Starting osmo-stp 13:42:31.488938 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12242): Launched 13:42:31.911891 run osmo-stp_10.42.42.5(pid=12243): Launched 13:42:32.127565 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:42:32.692902 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12245): Launched 13:42:32.809167 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:42:33.090273 run patchelf(pid=12246): Launched 13:42:33.279500 run osmo-stp_10.42.42.5(pid=12243): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12243)] 13:42:33.418277 run osmo-stp_10.42.42.5(pid=12243): stdout: | (launched: 2022-12-09_13:42:31.655378) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:42:33.556886 run osmo-stp_10.42.42.5(pid=12243): stderr: | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209134231950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:42:33.691181 run osmo-stp_10.42.42.5(pid=12243): stdout: | (launched: 2022-12-09_13:42:31.655378) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:42:33.824048 run osmo-stp_10.42.42.5(pid=12243): stderr: | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209134231949 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209134231950 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209134231950 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:42:33.978169 run patchelf(pid=12246): Terminating (SIGINT) 13:42:34.158733 run patchelf(pid=12246): Terminated: ok {rc=0} 13:42:34.191988 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12243): Process ended prematurely: osmo-stp_10.42.42.5(pid=12243) [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12243)] [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 13:42:34.201931 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 13:42:34.265259 run osmo-hlr_10.42.42.2(pid=12240): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12240)] 13:42:34.316612 run osmo-hlr_10.42.42.2(pid=12240): stdout: | (launched: 2022-12-09_13:42:30.581482) 13:42:34.368845 run osmo-hlr_10.42.42.2(pid=12240): stderr: | �[0;m�[1;31m20221209134230780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209134230780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209134230780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209134230780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209134230780 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209134230781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209134230794 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209134230802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209134230802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209134230802 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:42:34.413034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12233): Terminating (SIGTERM) 13:42:34.454835 run iperf3-srv_10.42.42.10(pid=12234): Terminating (SIGTERM) 13:42:34.496751 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12235): Terminating (SIGTERM) 13:42:34.538665 run iperf3-srv_10.42.42.10(pid=12236): Terminating (SIGTERM) 13:42:34.580875 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12239): Terminating (SIGTERM) 13:42:34.622850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12242): Terminating (SIGTERM) 13:42:34.665122 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12245): Terminating (SIGTERM) 13:42:34.674955 --- ParallelTerminationStrategy: PID 12233 died... 13:42:34.731227 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12233): Terminated: ok {rc=0} 13:42:34.741466 --- ParallelTerminationStrategy: PID 12234 died... 13:42:34.797204 run iperf3-srv_10.42.42.10(pid=12234): Terminated {rc=256} 13:42:34.807347 --- ParallelTerminationStrategy: PID 12235 died... 13:42:34.863150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12235): Terminated: ok {rc=0} 13:42:34.873385 --- ParallelTerminationStrategy: PID 12236 died... 13:42:34.928778 run iperf3-srv_10.42.42.10(pid=12236): Terminated {rc=256} 13:42:34.938837 --- ParallelTerminationStrategy: PID 12239 died... 13:42:34.995017 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12239): Terminated: ok {rc=0} 13:42:35.005106 --- ParallelTerminationStrategy: PID 12242 died... 13:42:35.060814 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12242): Terminated: ok {rc=0} 13:42:35.070932 --- ParallelTerminationStrategy: PID 12245 died... 13:42:35.126384 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12245): Terminated: ok {rc=0} 13:42:35.212466 bus /gobi_0: Setting Powered False 13:42:36.315198 bus /gobi_0: Setting Powered False 13:42:37.424716 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12243): Process ended prematurely: osmo-stp_10.42.42.5(pid=12243) [trial-2360↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12243)]