Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=10849): Process ended prematurely: osmo-stp_10.42.42.5(pid=10849) [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10849)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 13:34:31.054826 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.067725 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 13:34:31.215612 tst cs_paging_gprs_active.py: using LAC 21810 13:34:31.377491 tst cs_paging_gprs_active.py: using RAC 135 13:34:31.546097 tst cs_paging_gprs_active.py: using CellId 21810 13:34:31.673651 tst cs_paging_gprs_active.py: using BVCI 21811 13:34:31.698094 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.709135 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.720720 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.733153 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.745950 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.758035 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.770069 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.782184 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 13:34:31.793663 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:34:31.912628 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 13:34:32.209440 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:34:32.345611 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:34:32.679659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10839): Launched 13:34:32.955317 run iperf3-srv_10.42.42.10(pid=10840): Launched 13:34:33.152564 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:34:33.286788 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:34:33.619783 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10841): Launched 13:34:33.895329 run iperf3-srv_10.42.42.10(pid=10842): Launched 13:34:34.091889 tst cs_paging_gprs_active.py:38: start network... 13:34:34.226582 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:34:34.731487 run create_hlr_db(pid=10843): Launched 13:34:34.916449 bus /sierra_2: Setting Powered False 13:34:35.938031 run create_hlr_db(pid=10843): Terminated: ok {rc=0} 13:34:36.362779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10845): Launched 13:34:36.683579 run osmo-hlr_10.42.42.2(pid=10846): Launched 13:34:36.802854 run osmo-stp_10.42.42.5: Starting osmo-stp 13:34:37.360699 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10848): Launched 13:34:37.682091 run osmo-stp_10.42.42.5(pid=10849): Launched 13:34:37.798975 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:34:38.358356 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10851): Launched 13:34:38.473541 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:34:38.753343 run patchelf(pid=10852): Launched 13:34:38.940430 run osmo-stp_10.42.42.5(pid=10849): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10849)] 13:34:39.077995 run osmo-stp_10.42.42.5(pid=10849): stdout: | (launched: 2022-12-09_13:34:37.524137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:34:39.215167 run osmo-stp_10.42.42.5(pid=10849): stderr: | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133437716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133437716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133437716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133437717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:34:39.347990 run osmo-stp_10.42.42.5(pid=10849): stdout: | (launched: 2022-12-09_13:34:37.524137) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:34:39.480019 run osmo-stp_10.42.42.5(pid=10849): stderr: | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209133437715 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209133437716 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209133437716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209133437716 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209133437717 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:34:39.632322 run patchelf(pid=10852): Terminating (SIGINT) 13:34:39.810883 run patchelf(pid=10852): Terminated: ok {rc=0} 13:34:39.843672 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10849): Process ended prematurely: osmo-stp_10.42.42.5(pid=10849) [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10849)] [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 13:34:39.853542 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:34:39.917189 run osmo-hlr_10.42.42.2(pid=10846): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10846)] 13:34:39.968833 run osmo-hlr_10.42.42.2(pid=10846): stdout: | (launched: 2022-12-09_13:34:36.526031) 13:34:40.021194 run osmo-hlr_10.42.42.2(pid=10846): stderr: | �[0;m�[1;31m20221209133436725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209133436725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209133436725 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209133436726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209133436726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209133436726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209133436737 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209133436745 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209133436746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209133436746 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:34:40.065814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10839): Terminating (SIGTERM) 13:34:40.107430 run iperf3-srv_10.42.42.10(pid=10840): Terminating (SIGTERM) 13:34:40.149355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10841): Terminating (SIGTERM) 13:34:40.191401 run iperf3-srv_10.42.42.10(pid=10842): Terminating (SIGTERM) 13:34:40.232919 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10845): Terminating (SIGTERM) 13:34:40.274677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10848): Terminating (SIGTERM) 13:34:40.316358 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10851): Terminating (SIGTERM) 13:34:40.326299 --- ParallelTerminationStrategy: PID 10839 died... 13:34:40.382396 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10839): Terminated: ok {rc=0} 13:34:40.392752 --- ParallelTerminationStrategy: PID 10840 died... 13:34:40.449154 run iperf3-srv_10.42.42.10(pid=10840): Terminated {rc=256} 13:34:40.459258 --- ParallelTerminationStrategy: PID 10841 died... 13:34:40.515361 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10841): Terminated: ok {rc=0} 13:34:40.525940 --- ParallelTerminationStrategy: PID 10842 died... 13:34:40.582075 run iperf3-srv_10.42.42.10(pid=10842): Terminated {rc=256} 13:34:40.592205 --- ParallelTerminationStrategy: PID 10845 died... 13:34:40.648513 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10845): Terminated: ok {rc=0} 13:34:40.658693 --- ParallelTerminationStrategy: PID 10848 died... 13:34:40.714972 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10848): Terminated: ok {rc=0} 13:34:40.725069 --- ParallelTerminationStrategy: PID 10851 died... 13:34:40.781369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10851): Terminated: ok {rc=0} 13:34:40.868721 bus /gobi_0: Setting Powered False 13:34:41.975514 bus /gobi_0: Setting Powered False 13:34:43.083753 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10849): Process ended prematurely: osmo-stp_10.42.42.5(pid=10849) [trial-2360↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10849)]