Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9647): Process ended prematurely: osmo-stp_10.42.42.5(pid=9647) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9647)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 13:21:14.399236 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:14.411554 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:21:14.572851 tst ping_idle_ping.py: using LAC 21738 13:21:14.692415 tst ping_idle_ping.py: using RAC 63 13:21:14.813205 tst ping_idle_ping.py: using CellId 21738 13:21:14.935688 tst ping_idle_ping.py: using BVCI 21739 13:21:14.959310 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:14.970481 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:14.981414 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:14.992380 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:15.003209 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:15.014222 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:15.025430 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:21:15.036323 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:21:15.312811 tst ping_idle_ping.py:24: start network... 13:21:15.438833 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:21:15.971881 run create_hlr_db(pid=9641): Launched 13:21:16.174250 bus /gobi_6: Setting Powered False 13:21:17.191182 run create_hlr_db(pid=9641): Terminated: ok {rc=0} 13:21:17.625385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9643): Launched 13:21:17.948068 run osmo-hlr_10.42.42.2(pid=9644): Launched 13:21:18.065525 run osmo-stp_10.42.42.5: Starting osmo-stp 13:21:18.629298 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9646): Launched 13:21:18.952713 run osmo-stp_10.42.42.5(pid=9647): Launched 13:21:19.070496 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:21:19.634150 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9649): Launched 13:21:19.749321 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:21:20.031430 run patchelf(pid=9650): Launched 13:21:20.220884 run osmo-stp_10.42.42.5(pid=9647): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9647)] 13:21:20.359019 run osmo-stp_10.42.42.5(pid=9647): stdout: | (launched: 2022-12-09_13:21:18.793779) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:21:20.497264 run osmo-stp_10.42.42.5(pid=9647): stderr: | �[0;m�[38;5;43m20221209132118985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132118985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132118986 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132118986 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:21:20.630763 run osmo-stp_10.42.42.5(pid=9647): stdout: | (launched: 2022-12-09_13:21:18.793779) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:21:20.763530 run osmo-stp_10.42.42.5(pid=9647): stderr: | �[0;m�[38;5;43m20221209132118985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132118985 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132118986 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132118986 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132118987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:21:20.917776 run patchelf(pid=9650): Terminating (SIGINT) 13:21:21.099069 run patchelf(pid=9650): Terminated: ok {rc=0} 13:21:21.131700 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9647): Process ended prematurely: osmo-stp_10.42.42.5(pid=9647) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9647)] [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 13:21:21.141075 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 13:21:21.204425 run osmo-hlr_10.42.42.2(pid=9644): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9644)] 13:21:21.256582 run osmo-hlr_10.42.42.2(pid=9644): stdout: | (launched: 2022-12-09_13:21:17.789488) 13:21:21.308941 run osmo-hlr_10.42.42.2(pid=9644): stderr: | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132117987 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132117999 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132118008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132118008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132118008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:21:21.353626 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9643): Terminating (SIGTERM) 13:21:21.395706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9646): Terminating (SIGTERM) 13:21:21.438009 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9649): Terminating (SIGTERM) 13:21:21.447917 --- ParallelTerminationStrategy: PID 9643 died... 13:21:21.503949 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9643): Terminated: ok {rc=0} 13:21:21.514156 --- ParallelTerminationStrategy: PID 9646 died... 13:21:21.570344 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9646): Terminated: ok {rc=0} 13:21:21.580326 --- ParallelTerminationStrategy: PID 9649 died... 13:21:21.636467 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9649): Terminated: ok {rc=0} 13:21:21.723090 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9647): Process ended prematurely: osmo-stp_10.42.42.5(pid=9647) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9647)]