Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10304): Process ended prematurely: osmo-stp_10.42.42.5(pid=10304) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10304)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:26:40.504533 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:40.515379 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:26:40.654299 tst cs_paging_gprs_active.py: using LAC 21768 13:26:40.773118 tst cs_paging_gprs_active.py: using RAC 93 13:26:40.894454 tst cs_paging_gprs_active.py: using CellId 21768 13:26:41.013793 tst cs_paging_gprs_active.py: using BVCI 21769 13:26:41.037135 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.048024 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.058698 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.069379 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.079911 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.090570 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.101355 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.111838 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:26:41.122616 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:26:41.241243 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:26:41.520418 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:26:41.647470 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:26:41.962700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10294): Launched 13:26:42.223619 run iperf3-srv_10.42.42.10(pid=10295): Launched 13:26:42.407996 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:26:42.533853 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:26:42.846730 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10296): Launched 13:26:43.106645 run iperf3-srv_10.42.42.10(pid=10297): Launched 13:26:43.291763 tst cs_paging_gprs_active.py:38: start network... 13:26:43.417608 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:26:43.902366 run create_hlr_db(pid=10298): Launched 13:26:44.075403 bus /gobi_6: Setting Powered False 13:26:45.098872 run create_hlr_db(pid=10298): Terminated: ok {rc=0} 13:26:45.532089 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10300): Launched 13:26:45.917496 run osmo-hlr_10.42.42.2(pid=10301): Launched 13:26:46.113272 run osmo-stp_10.42.42.5: Starting osmo-stp 13:26:46.713296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10303): Launched 13:26:47.103342 run osmo-stp_10.42.42.5(pid=10304): Launched 13:26:47.276828 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:26:47.814816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10306): Launched 13:26:47.922483 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:26:48.185196 run patchelf(pid=10307): Launched 13:26:48.362024 run osmo-stp_10.42.42.5(pid=10304): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10304)] 13:26:48.491530 run osmo-stp_10.42.42.5(pid=10304): stdout: | (launched: 2022-12-09_13:26:46.881383) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:26:48.620733 run osmo-stp_10.42.42.5(pid=10304): stderr: | �[0;m�[38;5;43m20221209132647184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132647184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132647189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132647189 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:26:48.746077 run osmo-stp_10.42.42.5(pid=10304): stdout: | (launched: 2022-12-09_13:26:46.881383) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:26:48.869735 run osmo-stp_10.42.42.5(pid=10304): stderr: | �[0;m�[38;5;43m20221209132647184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132647184 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132647189 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132647189 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132647197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:26:49.013917 run patchelf(pid=10307): Terminating (SIGINT) 13:26:49.183261 run patchelf(pid=10307): Terminated: ok {rc=0} 13:26:49.214540 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10304): Process ended prematurely: osmo-stp_10.42.42.5(pid=10304) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10304)] [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:26:49.223635 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:26:49.283722 run osmo-hlr_10.42.42.2(pid=10301): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10301)] 13:26:49.332296 run osmo-hlr_10.42.42.2(pid=10301): stdout: | (launched: 2022-12-09_13:26:45.697526) 13:26:49.381417 run osmo-hlr_10.42.42.2(pid=10301): stderr: | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132645900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132645919 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132645945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132645945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132645945 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:26:49.423499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10294): Terminating (SIGTERM) 13:26:49.462940 run iperf3-srv_10.42.42.10(pid=10295): Terminating (SIGTERM) 13:26:49.502318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10296): Terminating (SIGTERM) 13:26:49.541628 run iperf3-srv_10.42.42.10(pid=10297): Terminating (SIGTERM) 13:26:49.581287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10300): Terminating (SIGTERM) 13:26:49.621203 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10303): Terminating (SIGTERM) 13:26:49.660890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10306): Terminating (SIGTERM) 13:26:49.670103 --- ParallelTerminationStrategy: PID 10294 died... 13:26:49.722814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10294): Terminated: ok {rc=0} 13:26:49.732253 --- ParallelTerminationStrategy: PID 10295 died... 13:26:49.784462 run iperf3-srv_10.42.42.10(pid=10295): Terminated {rc=256} 13:26:49.793906 --- ParallelTerminationStrategy: PID 10296 died... 13:26:49.846307 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10296): Terminated: ok {rc=0} 13:26:49.855754 --- ParallelTerminationStrategy: PID 10297 died... 13:26:49.908129 run iperf3-srv_10.42.42.10(pid=10297): Terminated {rc=256} 13:26:49.917595 --- ParallelTerminationStrategy: PID 10300 died... 13:26:49.970160 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10300): Terminated: ok {rc=0} 13:26:49.979684 --- ParallelTerminationStrategy: PID 10303 died... 13:26:50.032090 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10303): Terminated: ok {rc=0} 13:26:50.041703 --- ParallelTerminationStrategy: PID 10306 died... 13:26:50.094298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10306): Terminated: ok {rc=0} 13:26:50.183470 bus /gobi_0: Setting Powered False 13:26:51.286345 bus /gobi_0: Setting Powered False 13:26:52.398018 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10304): Process ended prematurely: osmo-stp_10.42.42.5(pid=10304) [trial-2360↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10304)]