Failed
dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=23867): Process ended prematurely: osmo-stp_10.42.42.5(pid=23867) [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23867)]
Standard Output
---------------------------------------------- trial-2361 dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 16:43:21.708751 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:21.720264 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 16:43:21.870060 tst switch_tch_pdch.py: using LAC 22366 16:43:21.991881 tst switch_tch_pdch.py: using RAC 181 16:43:22.120863 tst switch_tch_pdch.py: using CellId 22366 16:43:22.241256 tst switch_tch_pdch.py: using BVCI 22367 16:43:22.263681 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.275190 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.286695 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.298635 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.310469 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.322442 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.334455 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 16:43:22.346575 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 16:43:22.467733 tst dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 16:43:22.742836 tst switch_tch_pdch.py:51: start network... 16:43:22.865959 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:43:23.340734 run create_hlr_db(pid=23861): Launched 16:43:23.512108 bus /gobi_6: Setting Powered False 16:43:24.532096 run create_hlr_db(pid=23861): Terminated: ok {rc=0} 16:43:24.954242 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23863): Launched 16:43:25.271827 run osmo-hlr_10.42.42.2(pid=23864): Launched 16:43:25.390589 run osmo-stp_10.42.42.5: Starting osmo-stp 16:43:25.937599 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23866): Launched 16:43:26.254382 run osmo-stp_10.42.42.5(pid=23867): Launched 16:43:26.370247 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:43:26.920498 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23869): Launched 16:43:27.032791 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:43:27.308223 run patchelf(pid=23870): Launched 16:43:27.492920 run osmo-stp_10.42.42.5(pid=23867): ERR: Terminated: ERROR {rc=1} [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23867)] 16:43:27.627798 run osmo-stp_10.42.42.5(pid=23867): stdout: | (launched: 2022-12-09_16:43:26.098175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:43:27.763329 run osmo-stp_10.42.42.5(pid=23867): stderr: | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164326291 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:43:27.893653 run osmo-stp_10.42.42.5(pid=23867): stdout: | (launched: 2022-12-09_16:43:26.098175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:43:28.022694 run osmo-stp_10.42.42.5(pid=23867): stderr: | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209164326290 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209164326291 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209164326291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:43:28.173191 run patchelf(pid=23870): Terminating (SIGINT) 16:43:28.349550 run patchelf(pid=23870): Terminated: ok {rc=0} 16:43:28.381624 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=23867): Process ended prematurely: osmo-stp_10.42.42.5(pid=23867) [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23867)] [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54] 16:43:28.390920 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 16:43:28.453844 run osmo-hlr_10.42.42.2(pid=23864): ERR: Terminated: ERROR {rc=237} [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23864)] 16:43:28.504883 run osmo-hlr_10.42.42.2(pid=23864): stdout: | (launched: 2022-12-09_16:43:25.115148) 16:43:28.556582 run osmo-hlr_10.42.42.2(pid=23864): stderr: | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209164325311 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209164325336 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209164325347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209164325347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209164325347 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:43:28.600317 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23863): Terminating (SIGTERM) 16:43:28.642092 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23866): Terminating (SIGTERM) 16:43:28.683743 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23869): Terminating (SIGTERM) 16:43:28.693737 --- ParallelTerminationStrategy: PID 23863 died... 16:43:28.749407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23863): Terminated: ok {rc=0} 16:43:28.759511 --- ParallelTerminationStrategy: PID 23866 died... 16:43:28.814835 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23866): Terminated: ok {rc=0} 16:43:28.825176 --- ParallelTerminationStrategy: PID 23869 died... 16:43:28.880606 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23869): Terminated: ok {rc=0} 16:43:28.966014 bus /gobi_0: Setting Powered False 16:43:30.071763 bus /gobi_0: Setting Powered False 16:43:31.184943 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23867): Process ended prematurely: osmo-stp_10.42.42.5(pid=23867) [trial-2361↪dynts:nanobts+band-1900+mod-bts0-dynts67-ipa-compat-nanobts+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23867)]