Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19627): Process ended prematurely: osmo-stp_10.42.42.5(pid=19627) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19627)]
Standard Output
---------------------------------------------- trial-2361 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 15:54:22.528540 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:22.540370 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 15:54:22.688610 tst ping_idle_ping.py: using LAC 22106 15:54:22.813619 tst ping_idle_ping.py: using RAC 176 15:54:22.937975 tst ping_idle_ping.py: using CellId 22106 15:54:23.061827 tst ping_idle_ping.py: using BVCI 22107 15:54:23.086387 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.097821 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.109239 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.120629 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.132163 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.143459 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.155007 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 15:54:23.166439 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 15:54:23.460491 tst ping_idle_ping.py:24: start network... 15:54:23.596143 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:54:24.109468 run create_hlr_db(pid=19621): Launched 15:54:24.296861 bus /gobi_6: Setting Powered False 15:54:25.306167 run create_hlr_db(pid=19621): Terminated: ok {rc=0} 15:54:25.747665 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19623): Launched 15:54:26.070128 run osmo-hlr_10.42.42.2(pid=19624): Launched 15:54:26.185449 run osmo-stp_10.42.42.5: Starting osmo-stp 15:54:26.744474 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19626): Launched 15:54:27.067835 run osmo-stp_10.42.42.5(pid=19627): Launched 15:54:27.184805 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:54:27.749809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19629): Launched 15:54:27.865447 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:54:28.147778 run patchelf(pid=19630): Launched 15:54:28.336908 run osmo-stp_10.42.42.5(pid=19627): ERR: Terminated: ERROR {rc=1} [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19627)] 15:54:28.475440 run osmo-stp_10.42.42.5(pid=19627): stdout: | (launched: 2022-12-09_15:54:26.908132) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:28.615114 run osmo-stp_10.42.42.5(pid=19627): stderr: | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155427099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:28.750057 run osmo-stp_10.42.42.5(pid=19627): stdout: | (launched: 2022-12-09_15:54:26.908132) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:54:28.883109 run osmo-stp_10.42.42.5(pid=19627): stderr: | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209155427098 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209155427099 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209155427099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:54:29.037215 run patchelf(pid=19630): Terminating (SIGINT) 15:54:29.217779 run patchelf(pid=19630): Terminated: ok {rc=0} 15:54:29.250746 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=19627): Process ended prematurely: osmo-stp_10.42.42.5(pid=19627) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19627)] [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 15:54:29.259975 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 15:54:29.324625 run osmo-hlr_10.42.42.2(pid=19624): ERR: Terminated: ERROR {rc=237} [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19624)] 15:54:29.377152 run osmo-hlr_10.42.42.2(pid=19624): stdout: | (launched: 2022-12-09_15:54:25.911648) 15:54:29.430357 run osmo-hlr_10.42.42.2(pid=19624): stderr: | �[0;m�[1;31m20221209155426106 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209155426107 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209155426107 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209155426107 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209155426107 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209155426107 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209155426119 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2361/run.2022-12-09_15-36-58/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209155426128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209155426128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209155426128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:54:29.475411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19623): Terminating (SIGTERM) 15:54:29.517819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19626): Terminating (SIGTERM) 15:54:29.560604 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19629): Terminating (SIGTERM) 15:54:29.570918 --- ParallelTerminationStrategy: PID 19623 died... 15:54:29.628310 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19623): Terminated: ok {rc=0} 15:54:29.638587 --- ParallelTerminationStrategy: PID 19626 died... 15:54:29.696284 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19626): Terminated: ok {rc=0} 15:54:29.706663 --- ParallelTerminationStrategy: PID 19629 died... 15:54:29.763782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19629): Terminated: ok {rc=0} 15:54:29.851459 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19627): Process ended prematurely: osmo-stp_10.42.42.5(pid=19627) [trial-2361↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19627)]