Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=32362): Process ended prematurely: osmo-stp_10.42.42.5(pid=32362) [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32362)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 18:14:33.353851 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.365729 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 18:14:33.495764 tst ping_idle_ping.py: using LAC 22816 18:14:33.617274 tst ping_idle_ping.py: using RAC 121 18:14:33.736432 tst ping_idle_ping.py: using CellId 22816 18:14:33.862654 tst ping_idle_ping.py: using BVCI 22817 18:14:33.886664 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.897850 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.908903 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.919898 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.930868 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.942063 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.953583 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 18:14:33.964564 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 18:14:34.232480 tst ping_idle_ping.py:24: start network... 18:14:34.354586 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:14:34.816923 run create_hlr_db(pid=32356): Launched 18:14:34.985854 bus /gobi_6: Setting Powered False 18:14:36.019167 run create_hlr_db(pid=32356): Terminated: ok {rc=0} 18:14:36.413963 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32358): Launched 18:14:36.706506 run osmo-hlr_10.42.42.2(pid=32359): Launched 18:14:36.813378 run osmo-stp_10.42.42.5: Starting osmo-stp 18:14:37.320594 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32361): Launched 18:14:37.613538 run osmo-stp_10.42.42.5(pid=32362): Launched 18:14:37.719570 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:14:38.228821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32364): Launched 18:14:38.333314 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:14:38.589675 run patchelf(pid=32365): Launched 18:14:38.761512 run osmo-stp_10.42.42.5(pid=32362): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32362)] 18:14:38.887982 run osmo-stp_10.42.42.5(pid=32362): stdout: | (launched: 2022-12-09_18:14:37.468340) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:39.015238 run osmo-stp_10.42.42.5(pid=32362): stderr: | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209181437639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:39.137088 run osmo-stp_10.42.42.5(pid=32362): stdout: | (launched: 2022-12-09_18:14:37.468340) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:14:39.257896 run osmo-stp_10.42.42.5(pid=32362): stderr: | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209181437638 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209181437639 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209181437639 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:14:39.398019 run patchelf(pid=32365): Terminating (SIGINT) 18:14:39.563193 run patchelf(pid=32365): Terminated: ok {rc=0} 18:14:39.593335 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=32362): Process ended prematurely: osmo-stp_10.42.42.5(pid=32362) [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32362)] [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 18:14:39.601998 tst ping_idle_ping.py:27: Test FAILED (6.2 sec) 18:14:39.662529 run osmo-hlr_10.42.42.2(pid=32359): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32359)] 18:14:39.711627 run osmo-hlr_10.42.42.2(pid=32359): stdout: | (launched: 2022-12-09_18:14:36.562037) 18:14:39.761365 run osmo-hlr_10.42.42.2(pid=32359): stderr: | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209181436734 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209181436746 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209181436754 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209181436755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209181436755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:14:39.803407 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32358): Terminating (SIGTERM) 18:14:39.843026 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32361): Terminating (SIGTERM) 18:14:39.882966 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32364): Terminating (SIGTERM) 18:14:39.892468 --- ParallelTerminationStrategy: PID 32358 died... 18:14:39.946368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32358): Terminated: ok {rc=0} 18:14:39.956162 --- ParallelTerminationStrategy: PID 32361 died... 18:14:40.009275 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32361): Terminated: ok {rc=0} 18:14:40.019148 --- ParallelTerminationStrategy: PID 32364 died... 18:14:40.072242 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32364): Terminated: ok {rc=0} 18:14:40.159958 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32362): Process ended prematurely: osmo-stp_10.42.42.5(pid=32362) [trial-2362↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32362)]