Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=504): Process ended prematurely: osmo-stp_10.42.42.5(pid=504) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=504)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 18:22:48.606538 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:48.617839 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 18:22:48.750709 tst cs_paging_gprs_active.py: using LAC 22860 18:22:48.872550 tst cs_paging_gprs_active.py: using RAC 165 18:22:49.000485 tst cs_paging_gprs_active.py: using CellId 22860 18:22:49.124390 tst cs_paging_gprs_active.py: using BVCI 22861 18:22:49.149004 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.160783 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.172257 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.184103 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.196056 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.207683 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.219357 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.230908 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:22:49.242760 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:22:49.362941 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:22:49.639550 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:22:49.763602 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:22:50.071713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=494): Launched 18:22:50.328063 run iperf3-srv_10.42.42.10(pid=495): Launched 18:22:50.509207 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:22:50.632702 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:22:50.941051 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=496): Launched 18:22:51.196880 run iperf3-srv_10.42.42.10(pid=497): Launched 18:22:51.378761 tst cs_paging_gprs_active.py:38: start network... 18:22:51.502260 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:22:51.972615 run create_hlr_db(pid=498): Launched 18:22:52.143898 bus /gobi_6: Setting Powered False 18:22:53.166424 run create_hlr_db(pid=498): Terminated: ok {rc=0} 18:22:53.590081 run pcap-recorder_any(filters='host 10.42.42.2')(pid=500): Launched 18:22:53.908151 run osmo-hlr_10.42.42.2(pid=501): Launched 18:22:54.027664 run osmo-stp_10.42.42.5: Starting osmo-stp 18:22:54.580729 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=503): Launched 18:22:54.898326 run osmo-stp_10.42.42.5(pid=504): Launched 18:22:55.012874 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:22:55.568242 run pcap-recorder_any(filters='host 10.42.42.6')(pid=506): Launched 18:22:55.681642 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:22:55.959102 run patchelf(pid=507): Launched 18:22:56.145775 run osmo-stp_10.42.42.5(pid=504): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=504)] 18:22:56.283001 run osmo-stp_10.42.42.5(pid=504): stdout: | (launched: 2022-12-09_18:22:54.742110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:56.419708 run osmo-stp_10.42.42.5(pid=504): stderr: | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182254935 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:56.551727 run osmo-stp_10.42.42.5(pid=504): stdout: | (launched: 2022-12-09_18:22:54.742110) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:56.682437 run osmo-stp_10.42.42.5(pid=504): stderr: | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182254934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182254935 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182254935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:56.834915 run patchelf(pid=507): Terminating (SIGINT) 18:22:57.014588 run patchelf(pid=507): Terminated: ok {rc=0} 18:22:57.047818 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=504): Process ended prematurely: osmo-stp_10.42.42.5(pid=504) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=504)] [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 18:22:57.057726 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:22:57.120435 run osmo-hlr_10.42.42.2(pid=501): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=501)] 18:22:57.171738 run osmo-hlr_10.42.42.2(pid=501): stdout: | (launched: 2022-12-09_18:22:53.751686) 18:22:57.223756 run osmo-hlr_10.42.42.2(pid=501): stderr: | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209182253949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209182253962 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209182253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209182253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209182253970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:22:57.267818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=494): Terminating (SIGTERM) 18:22:57.309526 run iperf3-srv_10.42.42.10(pid=495): Terminating (SIGTERM) 18:22:57.351234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=496): Terminating (SIGTERM) 18:22:57.392877 run iperf3-srv_10.42.42.10(pid=497): Terminating (SIGTERM) 18:22:57.434811 run pcap-recorder_any(filters='host 10.42.42.2')(pid=500): Terminating (SIGTERM) 18:22:57.476424 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=503): Terminating (SIGTERM) 18:22:57.518718 run pcap-recorder_any(filters='host 10.42.42.6')(pid=506): Terminating (SIGTERM) 18:22:57.528211 --- ParallelTerminationStrategy: PID 494 died... 18:22:57.583709 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=494): Terminated: ok {rc=0} 18:22:57.593659 --- ParallelTerminationStrategy: PID 495 died... 18:22:57.648699 run iperf3-srv_10.42.42.10(pid=495): Terminated {rc=256} 18:22:57.658576 --- ParallelTerminationStrategy: PID 496 died... 18:22:57.713654 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=496): Terminated: ok {rc=0} 18:22:57.723492 --- ParallelTerminationStrategy: PID 497 died... 18:22:57.778512 run iperf3-srv_10.42.42.10(pid=497): Terminated {rc=256} 18:22:57.788366 --- ParallelTerminationStrategy: PID 500 died... 18:22:57.843566 run pcap-recorder_any(filters='host 10.42.42.2')(pid=500): Terminated: ok {rc=0} 18:22:57.853891 --- ParallelTerminationStrategy: PID 503 died... 18:22:57.909026 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=503): Terminated: ok {rc=0} 18:22:57.918934 --- ParallelTerminationStrategy: PID 506 died... 18:22:57.974230 run pcap-recorder_any(filters='host 10.42.42.6')(pid=506): Terminated: ok {rc=0} 18:22:58.062315 bus /gobi_0: Setting Powered False 18:22:59.169511 bus /gobi_0: Setting Powered False 18:23:00.277251 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=504): Process ended prematurely: osmo-stp_10.42.42.5(pid=504) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=504)]