Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=332): Process ended prematurely: osmo-stp_10.42.42.5(pid=332) [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=332)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 18:20:40.727808 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:40.739667 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 18:20:40.880616 tst ping_idle_ping.py: using LAC 22849 18:20:41.009583 tst ping_idle_ping.py: using RAC 154 18:20:41.131021 tst ping_idle_ping.py: using CellId 22849 18:20:41.253464 tst ping_idle_ping.py: using BVCI 22850 18:20:41.277386 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.288314 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.299251 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.310132 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.320929 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.331810 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.342809 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 18:20:41.354016 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 18:20:41.625107 tst ping_idle_ping.py:24: start network... 18:20:41.747266 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:20:42.214210 run create_hlr_db(pid=326): Launched 18:20:42.384861 bus /gobi_6: Setting Powered False 18:20:43.405073 run create_hlr_db(pid=326): Terminated: ok {rc=0} 18:20:43.798673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=328): Launched 18:20:44.092833 run osmo-hlr_10.42.42.2(pid=329): Launched 18:20:44.199812 run osmo-stp_10.42.42.5: Starting osmo-stp 18:20:44.709016 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=331): Launched 18:20:45.003298 run osmo-stp_10.42.42.5(pid=332): Launched 18:20:45.110653 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:20:45.624450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=334): Launched 18:20:45.728140 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:20:46.026750 run patchelf(pid=335): Launched 18:20:46.203005 run osmo-stp_10.42.42.5(pid=332): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=332)] 18:20:46.333281 run osmo-stp_10.42.42.5(pid=332): stdout: | (launched: 2022-12-09_18:20:44.857722) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:46.463902 run osmo-stp_10.42.42.5(pid=332): stderr: | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182045029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:46.589405 run osmo-stp_10.42.42.5(pid=332): stdout: | (launched: 2022-12-09_18:20:44.857722) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:20:46.713447 run osmo-stp_10.42.42.5(pid=332): stderr: | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182045028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182045029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182045029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:20:46.857964 run patchelf(pid=335): Terminating (SIGINT) 18:20:47.028446 run patchelf(pid=335): Terminated: ok {rc=0} 18:20:47.060124 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=332): Process ended prematurely: osmo-stp_10.42.42.5(pid=332) [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=332)] [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 18:20:47.069879 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 18:20:47.134666 run osmo-hlr_10.42.42.2(pid=329): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=329)] 18:20:47.185460 run osmo-hlr_10.42.42.2(pid=329): stdout: | (launched: 2022-12-09_18:20:43.947634) 18:20:47.235151 run osmo-hlr_10.42.42.2(pid=329): stderr: | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209182044120 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209182044132 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209182044141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209182044141 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209182044142 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:20:47.277542 run pcap-recorder_any(filters='host 10.42.42.2')(pid=328): Terminating (SIGTERM) 18:20:47.317664 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=331): Terminating (SIGTERM) 18:20:47.357433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=334): Terminating (SIGTERM) 18:20:47.366705 --- ParallelTerminationStrategy: PID 328 died... 18:20:47.420438 run pcap-recorder_any(filters='host 10.42.42.2')(pid=328): Terminated: ok {rc=0} 18:20:47.430234 --- ParallelTerminationStrategy: PID 331 died... 18:20:47.483574 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=331): Terminated: ok {rc=0} 18:20:47.493316 --- ParallelTerminationStrategy: PID 334 died... 18:20:47.546244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=334): Terminated: ok {rc=0} 18:20:47.633533 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=332): Process ended prematurely: osmo-stp_10.42.42.5(pid=332) [trial-2362↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=332)]