Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27669): Process ended prematurely: osmo-stp_10.42.42.5(pid=27669) [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27669)]
Standard Output
---------------------------------------------- trial-2362 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 17:27:47.342701 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.354628 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:27:47.507228 tst ping_idle_ping.py: using LAC 22567 17:27:47.632196 tst ping_idle_ping.py: using RAC 127 17:27:47.757162 tst ping_idle_ping.py: using CellId 22567 17:27:47.877666 tst ping_idle_ping.py: using BVCI 22568 17:27:47.900538 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.911655 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.922750 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.934484 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.946410 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.957685 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.970516 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:27:47.981585 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:27:48.258394 tst ping_idle_ping.py:24: start network... 17:27:48.383199 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:27:48.859960 run create_hlr_db(pid=27663): Launched 17:27:49.033351 bus /gobi_6: Setting Powered False 17:27:50.053471 run create_hlr_db(pid=27663): Terminated: ok {rc=0} 17:27:50.480677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27665): Launched 17:27:50.801496 run osmo-hlr_10.42.42.2(pid=27666): Launched 17:27:50.922101 run osmo-stp_10.42.42.5: Starting osmo-stp 17:27:51.476788 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27668): Launched 17:27:51.797116 run osmo-stp_10.42.42.5(pid=27669): Launched 17:27:51.912546 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:27:52.486686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27671): Launched 17:27:52.601001 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:27:52.879411 run patchelf(pid=27672): Launched 17:27:53.066753 run osmo-stp_10.42.42.5(pid=27669): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27669)] 17:27:53.203855 run osmo-stp_10.42.42.5(pid=27669): stdout: | (launched: 2022-12-09_17:27:51.639639) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:27:53.341794 run osmo-stp_10.42.42.5(pid=27669): stderr: | �[0;m�[38;5;43m20221209172751830 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209172751830 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209172751831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209172751831 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209172751831 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209172751832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209172751832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:27:53.474332 run osmo-stp_10.42.42.5(pid=27669): stdout: | (launched: 2022-12-09_17:27:51.639639) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:27:53.605900 run osmo-stp_10.42.42.5(pid=27669): stderr: | �[0;m�[38;5;43m20221209172751830 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209172751830 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209172751831 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209172751831 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209172751831 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209172751832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209172751832 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:27:53.758345 run patchelf(pid=27672): Terminating (SIGINT) 17:27:53.937468 run patchelf(pid=27672): Terminated: ok {rc=0} 17:27:53.970185 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=27669): Process ended prematurely: osmo-stp_10.42.42.5(pid=27669) [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27669)] [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 17:27:53.979524 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 17:27:54.042584 run osmo-hlr_10.42.42.2(pid=27666): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27666)] 17:27:54.094995 run osmo-hlr_10.42.42.2(pid=27666): stdout: | (launched: 2022-12-09_17:27:50.644273) 17:27:54.147726 run osmo-hlr_10.42.42.2(pid=27666): stderr: | �[0;m�[1;31m20221209172750842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209172750842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209172750842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209172750842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209172750842 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209172750843 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209172750855 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209172750863 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209172750864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209172750864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:27:54.192852 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27665): Terminating (SIGTERM) 17:27:54.235166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27668): Terminating (SIGTERM) 17:27:54.278014 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27671): Terminating (SIGTERM) 17:27:54.287822 --- ParallelTerminationStrategy: PID 27665 died... 17:27:54.344220 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27665): Terminated: ok {rc=0} 17:27:54.354414 --- ParallelTerminationStrategy: PID 27668 died... 17:27:54.410450 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27668): Terminated: ok {rc=0} 17:27:54.420570 --- ParallelTerminationStrategy: PID 27671 died... 17:27:54.476309 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27671): Terminated: ok {rc=0} 17:27:54.563750 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27669): Process ended prematurely: osmo-stp_10.42.42.5(pid=27669) [trial-2362↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27669)]