Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26951): Process ended prematurely: osmo-stp_10.42.42.5(pid=26951) [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26951)]
Standard Output
---------------------------------------------- trial-2362 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:24:56.859196 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:56.869731 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:24:56.989653 tst cs_paging_gprs_active.py: using LAC 22553 17:24:57.105066 tst cs_paging_gprs_active.py: using RAC 113 17:24:57.225847 tst cs_paging_gprs_active.py: using CellId 22553 17:24:57.348466 tst cs_paging_gprs_active.py: using BVCI 22554 17:24:57.373172 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.384106 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.395158 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.406187 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.416884 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.427762 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.438777 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.449403 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:24:57.460682 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:24:57.578555 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:24:57.863386 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:24:57.995923 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:24:58.324046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26931): Launched 17:24:58.596740 run iperf3-srv_10.42.42.10(pid=26932): Launched 17:24:58.792018 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:24:58.924255 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:24:59.252661 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26933): Launched 17:24:59.525731 run iperf3-srv_10.42.42.10(pid=26934): Launched 17:24:59.720184 tst cs_paging_gprs_active.py:38: start network... 17:24:59.852746 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:25:00.361524 run create_hlr_db(pid=26935): Launched 17:25:00.546033 bus /gobi_6: Setting Powered False 17:25:01.562334 run create_hlr_db(pid=26935): Terminated: ok {rc=0} 17:25:02.043888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26940): Launched 17:25:02.489204 run osmo-hlr_10.42.42.2(pid=26943): Launched 17:25:02.714425 run osmo-stp_10.42.42.5: Starting osmo-stp 17:25:03.270725 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26950): Launched 17:25:03.569718 run osmo-stp_10.42.42.5(pid=26951): Launched 17:25:03.678677 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:25:04.196193 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26953): Launched 17:25:04.301974 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:25:04.561963 run patchelf(pid=26954): Launched 17:25:04.736884 run osmo-stp_10.42.42.5(pid=26951): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26951)] 17:25:04.864733 run osmo-stp_10.42.42.5(pid=26951): stdout: | (launched: 2022-12-09_17:25:03.421737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:04.993670 run osmo-stp_10.42.42.5(pid=26951): stderr: | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209172503592 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:05.117113 run osmo-stp_10.42.42.5(pid=26951): stdout: | (launched: 2022-12-09_17:25:03.421737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:05.239498 run osmo-stp_10.42.42.5(pid=26951): stderr: | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209172503591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209172503592 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209172503592 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:05.382212 run patchelf(pid=26954): Terminating (SIGINT) 17:25:05.550571 run patchelf(pid=26954): Terminated: ok {rc=0} 17:25:05.581687 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26951): Process ended prematurely: osmo-stp_10.42.42.5(pid=26951) [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26951)] [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:25:05.590964 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:25:05.651247 run osmo-hlr_10.42.42.2(pid=26943): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26943)] 17:25:05.700265 run osmo-hlr_10.42.42.2(pid=26943): stdout: | (launched: 2022-12-09_17:25:02.263341) 17:25:05.750137 run osmo-hlr_10.42.42.2(pid=26943): stderr: | �[0;m�[1;31m20221209172502581 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209172502581 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209172502582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209172502582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209172502582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209172502582 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209172502608 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209172502620 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209172502621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209172502621 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:25:05.792032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26931): Terminating (SIGTERM) 17:25:05.831801 run iperf3-srv_10.42.42.10(pid=26932): Terminating (SIGTERM) 17:25:05.871574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26933): Terminating (SIGTERM) 17:25:05.911336 run iperf3-srv_10.42.42.10(pid=26934): Terminating (SIGTERM) 17:25:05.950933 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26940): Terminating (SIGTERM) 17:25:05.991009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26950): Terminating (SIGTERM) 17:25:06.030984 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26953): Terminating (SIGTERM) 17:25:06.040220 --- ParallelTerminationStrategy: PID 26931 died... 17:25:06.093530 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26931): Terminated: ok {rc=0} 17:25:06.102987 --- ParallelTerminationStrategy: PID 26932 died... 17:25:06.155806 run iperf3-srv_10.42.42.10(pid=26932): Terminated {rc=256} 17:25:06.165316 --- ParallelTerminationStrategy: PID 26933 died... 17:25:06.218172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26933): Terminated: ok {rc=0} 17:25:06.227623 --- ParallelTerminationStrategy: PID 26934 died... 17:25:06.280052 run iperf3-srv_10.42.42.10(pid=26934): Terminated {rc=256} 17:25:06.289688 --- ParallelTerminationStrategy: PID 26940 died... 17:25:06.342617 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26940): Terminated: ok {rc=0} 17:25:06.352044 --- ParallelTerminationStrategy: PID 26950 died... 17:25:06.404677 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26950): Terminated: ok {rc=0} 17:25:06.414363 --- ParallelTerminationStrategy: PID 26953 died... 17:25:06.467859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26953): Terminated: ok {rc=0} 17:25:06.557101 bus /gobi_0: Setting Powered False 17:25:07.658660 bus /gobi_0: Setting Powered False 17:25:08.764687 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26951): Process ended prematurely: osmo-stp_10.42.42.5(pid=26951) [trial-2362↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26951)]