Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26191): Process ended prematurely: osmo-stp_10.42.42.5(pid=26191) [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26191)]
Standard Output
---------------------------------------------- trial-2362 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 17:18:00.508726 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:00.519767 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 17:18:00.666197 tst cs_paging_gprs_active.py: using LAC 22516 17:18:00.794508 tst cs_paging_gprs_active.py: using RAC 76 17:18:00.931797 tst cs_paging_gprs_active.py: using CellId 22516 17:18:01.091879 tst cs_paging_gprs_active.py: using BVCI 22517 17:18:01.118325 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.130292 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.142075 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.154407 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.167458 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.179785 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.192120 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.203915 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 17:18:01.216399 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:18:01.341607 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 17:18:01.676150 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:18:01.810675 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:18:02.155948 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26181): Launched 17:18:02.425861 run iperf3-srv_10.42.42.10(pid=26182): Launched 17:18:02.614343 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:18:02.743039 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:18:03.066042 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26183): Launched 17:18:03.333888 run iperf3-srv_10.42.42.10(pid=26184): Launched 17:18:03.522420 tst cs_paging_gprs_active.py:38: start network... 17:18:03.650929 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:18:04.139952 run create_hlr_db(pid=26185): Launched 17:18:04.318225 bus /gobi_6: Setting Powered False 17:18:05.339895 run create_hlr_db(pid=26185): Terminated: ok {rc=0} 17:18:05.783835 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26187): Launched 17:18:06.118960 run osmo-hlr_10.42.42.2(pid=26188): Launched 17:18:06.243376 run osmo-stp_10.42.42.5: Starting osmo-stp 17:18:06.826382 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26190): Launched 17:18:07.160149 run osmo-stp_10.42.42.5(pid=26191): Launched 17:18:07.281243 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:18:07.863777 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26193): Launched 17:18:07.982321 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:18:08.274528 run patchelf(pid=26194): Launched 17:18:08.468820 run osmo-stp_10.42.42.5(pid=26191): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26191)] 17:18:08.610951 run osmo-stp_10.42.42.5(pid=26191): stdout: | (launched: 2022-12-09_17:18:06.995228) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:08.752897 run osmo-stp_10.42.42.5(pid=26191): stderr: | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171807191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:08.890067 run osmo-stp_10.42.42.5(pid=26191): stdout: | (launched: 2022-12-09_17:18:06.995228) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:18:09.026068 run osmo-stp_10.42.42.5(pid=26191): stderr: | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171807190 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171807191 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171807191 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:18:09.184394 run patchelf(pid=26194): Terminating (SIGINT) 17:18:09.372245 run patchelf(pid=26194): Terminated: ok {rc=0} 17:18:09.406589 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26191): Process ended prematurely: osmo-stp_10.42.42.5(pid=26191) [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26191)] [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 17:18:09.416671 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:18:09.480918 run osmo-hlr_10.42.42.2(pid=26188): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26188)] 17:18:09.533172 run osmo-hlr_10.42.42.2(pid=26188): stdout: | (launched: 2022-12-09_17:18:05.953311) 17:18:09.586059 run osmo-hlr_10.42.42.2(pid=26188): stderr: | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209171806155 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209171806167 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209171806176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209171806176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209171806176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:18:09.631336 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26181): Terminating (SIGTERM) 17:18:09.673896 run iperf3-srv_10.42.42.10(pid=26182): Terminating (SIGTERM) 17:18:09.716517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26183): Terminating (SIGTERM) 17:18:09.759249 run iperf3-srv_10.42.42.10(pid=26184): Terminating (SIGTERM) 17:18:09.802036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26187): Terminating (SIGTERM) 17:18:09.844561 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26190): Terminating (SIGTERM) 17:18:09.887143 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26193): Terminating (SIGTERM) 17:18:09.897043 --- ParallelTerminationStrategy: PID 26181 died... 17:18:09.953830 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26181): Terminated: ok {rc=0} 17:18:09.964180 --- ParallelTerminationStrategy: PID 26182 died... 17:18:10.020493 run iperf3-srv_10.42.42.10(pid=26182): Terminated {rc=256} 17:18:10.030857 --- ParallelTerminationStrategy: PID 26183 died... 17:18:10.086979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26183): Terminated: ok {rc=0} 17:18:10.097250 --- ParallelTerminationStrategy: PID 26184 died... 17:18:10.153243 run iperf3-srv_10.42.42.10(pid=26184): Terminated {rc=256} 17:18:10.163516 --- ParallelTerminationStrategy: PID 26187 died... 17:18:10.219916 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26187): Terminated: ok {rc=0} 17:18:10.230217 --- ParallelTerminationStrategy: PID 26190 died... 17:18:10.286867 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26190): Terminated: ok {rc=0} 17:18:10.297179 --- ParallelTerminationStrategy: PID 26193 died... 17:18:10.353452 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26193): Terminated: ok {rc=0} 17:18:10.440396 bus /gobi_0: Setting Powered False 17:18:11.548148 bus /gobi_0: Setting Powered False 17:18:12.660317 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26191): Process ended prematurely: osmo-stp_10.42.42.5(pid=26191) [trial-2362↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26191)]