Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=31546): Process ended prematurely: osmo-stp_10.42.42.5(pid=31546) [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31546)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 18:06:36.016844 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.027907 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 18:06:36.162970 tst cs_paging_gprs_active.py: using LAC 22774 18:06:36.283335 tst cs_paging_gprs_active.py: using RAC 79 18:06:36.405315 tst cs_paging_gprs_active.py: using CellId 22774 18:06:36.528176 tst cs_paging_gprs_active.py: using BVCI 22775 18:06:36.551690 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.562879 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.573576 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.584906 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.595881 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.607226 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.618664 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.629763 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:06:36.640894 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:06:36.762120 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:06:37.047889 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:06:37.176688 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:06:37.498579 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31536): Launched 18:06:37.765399 run iperf3-srv_10.42.42.10(pid=31537): Launched 18:06:37.954107 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:06:38.082195 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:06:38.404032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31538): Launched 18:06:38.671436 run iperf3-srv_10.42.42.10(pid=31539): Launched 18:06:38.859948 tst cs_paging_gprs_active.py:38: start network... 18:06:38.988754 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:06:39.474648 run create_hlr_db(pid=31540): Launched 18:06:39.652299 bus /sierra_2: Setting Powered False 18:06:40.674695 run create_hlr_db(pid=31540): Terminated: ok {rc=0} 18:06:41.085914 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31542): Launched 18:06:41.395185 run osmo-hlr_10.42.42.2(pid=31543): Launched 18:06:41.511814 run osmo-stp_10.42.42.5: Starting osmo-stp 18:06:42.048546 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31545): Launched 18:06:42.358224 run osmo-stp_10.42.42.5(pid=31546): Launched 18:06:42.470675 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:06:43.010847 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31548): Launched 18:06:43.121091 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:06:43.392187 run patchelf(pid=31549): Launched 18:06:43.574185 run osmo-stp_10.42.42.5(pid=31546): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31546)] 18:06:43.706503 run osmo-stp_10.42.42.5(pid=31546): stdout: | (launched: 2022-12-09_18:06:42.205262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:06:43.841559 run osmo-stp_10.42.42.5(pid=31546): stderr: | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180642379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:06:43.969260 run osmo-stp_10.42.42.5(pid=31546): stdout: | (launched: 2022-12-09_18:06:42.205262) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:06:44.095985 run osmo-stp_10.42.42.5(pid=31546): stderr: | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209180642378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209180642379 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209180642379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:06:44.244003 run patchelf(pid=31549): Terminating (SIGINT) 18:06:44.418784 run patchelf(pid=31549): Terminated: ok {rc=0} 18:06:44.451020 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31546): Process ended prematurely: osmo-stp_10.42.42.5(pid=31546) [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31546)] [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 18:06:44.460380 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:06:44.521693 run osmo-hlr_10.42.42.2(pid=31543): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31543)] 18:06:44.571380 run osmo-hlr_10.42.42.2(pid=31543): stdout: | (launched: 2022-12-09_18:06:41.241906) 18:06:44.621618 run osmo-hlr_10.42.42.2(pid=31543): stderr: | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209180641419 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209180641431 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209180641440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209180641440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209180641440 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:06:44.664495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31536): Terminating (SIGTERM) 18:06:44.704547 run iperf3-srv_10.42.42.10(pid=31537): Terminating (SIGTERM) 18:06:44.744760 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31538): Terminating (SIGTERM) 18:06:44.784992 run iperf3-srv_10.42.42.10(pid=31539): Terminating (SIGTERM) 18:06:44.825595 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31542): Terminating (SIGTERM) 18:06:44.865509 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31545): Terminating (SIGTERM) 18:06:44.905853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31548): Terminating (SIGTERM) 18:06:44.915245 --- ParallelTerminationStrategy: PID 31536 died... 18:06:44.969177 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31536): Terminated: ok {rc=0} 18:06:44.979267 --- ParallelTerminationStrategy: PID 31537 died... 18:06:45.033111 run iperf3-srv_10.42.42.10(pid=31537): Terminated {rc=256} 18:06:45.042876 --- ParallelTerminationStrategy: PID 31538 died... 18:06:45.096693 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31538): Terminated: ok {rc=0} 18:06:45.106633 --- ParallelTerminationStrategy: PID 31539 died... 18:06:45.161386 run iperf3-srv_10.42.42.10(pid=31539): Terminated {rc=256} 18:06:45.171084 --- ParallelTerminationStrategy: PID 31542 died... 18:06:45.224329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31542): Terminated: ok {rc=0} 18:06:45.234366 --- ParallelTerminationStrategy: PID 31545 died... 18:06:45.287940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31545): Terminated: ok {rc=0} 18:06:45.297845 --- ParallelTerminationStrategy: PID 31548 died... 18:06:45.351442 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31548): Terminated: ok {rc=0} 18:06:45.439721 bus /gobi_0: Setting Powered False 18:06:46.545647 bus /gobi_0: Setting Powered False 18:06:47.655891 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31546): Process ended prematurely: osmo-stp_10.42.42.5(pid=31546) [trial-2362↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31546)]