Failed
gprs:trx-sysmocell5000.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000)
Stacktrace
osmo-stp_10.42.42.5(pid=28948): Process ended prematurely: osmo-stp_10.42.42.5(pid=28948) [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28948)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-sysmocell5000 cs_paging_gprs_active.py ---------------------------------------------- 17:41:28.102056 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.113173 tst gprs:trx-sysmocell5000: Using 1 x bts (candidates: 1) 17:41:28.251120 tst cs_paging_gprs_active.py: using LAC 22641 17:41:28.376110 tst cs_paging_gprs_active.py: using RAC 201 17:41:28.509302 tst cs_paging_gprs_active.py: using CellId 22641 17:41:28.637187 tst cs_paging_gprs_active.py: using BVCI 22642 17:41:28.662184 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.673637 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.684732 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.695776 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.706663 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.717714 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.728694 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.739589 tst gprs:trx-sysmocell5000: Using 1 x ip_address (candidates: 9) 17:41:28.750699 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 17:41:28.867025 tst gprs:trx-sysmocell5000: Using 1 x modem (candidates: 4) 17:41:29.144901 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:41:29.270811 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:41:29.585987 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28938): Launched 17:41:29.848420 run iperf3-srv_10.42.42.10(pid=28939): Launched 17:41:30.033596 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:41:30.159752 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:41:30.474843 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28940): Launched 17:41:30.736859 run iperf3-srv_10.42.42.10(pid=28941): Launched 17:41:30.933021 tst cs_paging_gprs_active.py:38: start network... 17:41:31.062079 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:41:31.585740 run create_hlr_db(pid=28942): Launched 17:41:31.764763 bus /sierra_2: Setting Powered False 17:41:32.782178 run create_hlr_db(pid=28942): Terminated: ok {rc=0} 17:41:33.214735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28944): Launched 17:41:33.540756 run osmo-hlr_10.42.42.2(pid=28945): Launched 17:41:33.660696 run osmo-stp_10.42.42.5: Starting osmo-stp 17:41:34.228315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28947): Launched 17:41:34.554064 run osmo-stp_10.42.42.5(pid=28948): Launched 17:41:34.672052 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:41:35.240304 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28950): Launched 17:41:35.355957 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:41:35.633718 run patchelf(pid=28951): Launched 17:41:35.812811 run osmo-stp_10.42.42.5(pid=28948): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28948)] 17:41:35.943469 run osmo-stp_10.42.42.5(pid=28948): stdout: | (launched: 2022-12-09_17:41:34.393834) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:41:36.074541 run osmo-stp_10.42.42.5(pid=28948): stderr: | �[0;m�[38;5;43m20221209174134588 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209174134588 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209174134589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209174134589 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:41:36.200743 run osmo-stp_10.42.42.5(pid=28948): stdout: | (launched: 2022-12-09_17:41:34.393834) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:41:36.325685 run osmo-stp_10.42.42.5(pid=28948): stderr: | �[0;m�[38;5;43m20221209174134588 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209174134588 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209174134589 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209174134589 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209174134590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:41:36.471581 run patchelf(pid=28951): Terminating (SIGINT) 17:41:36.643981 run patchelf(pid=28951): Terminated: ok {rc=0} 17:41:36.675905 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28948): Process ended prematurely: osmo-stp_10.42.42.5(pid=28948) [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28948)] [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38] 17:41:36.685354 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 17:41:36.746633 run osmo-hlr_10.42.42.2(pid=28945): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28945)] 17:41:36.796240 run osmo-hlr_10.42.42.2(pid=28945): stdout: | (launched: 2022-12-09_17:41:33.380626) 17:41:36.846717 run osmo-hlr_10.42.42.2(pid=28945): stderr: | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209174133577 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209174133589 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-sysmocell5000/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209174133598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209174133598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209174133598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:41:36.889251 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28938): Terminating (SIGTERM) 17:41:36.929558 run iperf3-srv_10.42.42.10(pid=28939): Terminating (SIGTERM) 17:41:36.969423 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28940): Terminating (SIGTERM) 17:41:37.009299 run iperf3-srv_10.42.42.10(pid=28941): Terminating (SIGTERM) 17:41:37.049335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28944): Terminating (SIGTERM) 17:41:37.089351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28947): Terminating (SIGTERM) 17:41:37.129439 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28950): Terminating (SIGTERM) 17:41:37.138814 --- ParallelTerminationStrategy: PID 28938 died... 17:41:37.193195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28938): Terminated: ok {rc=0} 17:41:37.202881 --- ParallelTerminationStrategy: PID 28939 died... 17:41:37.256525 run iperf3-srv_10.42.42.10(pid=28939): Terminated {rc=256} 17:41:37.266166 --- ParallelTerminationStrategy: PID 28940 died... 17:41:37.320265 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28940): Terminated: ok {rc=0} 17:41:37.329884 --- ParallelTerminationStrategy: PID 28941 died... 17:41:37.383124 run iperf3-srv_10.42.42.10(pid=28941): Terminated {rc=256} 17:41:37.392889 --- ParallelTerminationStrategy: PID 28944 died... 17:41:37.446415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28944): Terminated: ok {rc=0} 17:41:37.456234 --- ParallelTerminationStrategy: PID 28947 died... 17:41:37.509901 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28947): Terminated: ok {rc=0} 17:41:37.519831 --- ParallelTerminationStrategy: PID 28950 died... 17:41:37.574594 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28950): Terminated: ok {rc=0} 17:41:37.658559 bus /gobi_0: Setting Powered False 17:41:38.768213 bus /gobi_0: Setting Powered False 17:41:39.876750 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28948): Process ended prematurely: osmo-stp_10.42.42.5(pid=28948) [trial-2362↪gprs:trx-sysmocell5000↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28948)]