Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=805): Process ended prematurely: osmo-stp_10.42.42.5(pid=805) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=805)]
Standard Output
---------------------------------------------- trial-2362 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 18:23:11.935907 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:11.949162 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 18:23:12.093993 tst iperf3m4.py: using LAC 22862 18:23:12.216185 tst iperf3m4.py: using RAC 167 18:23:12.343727 tst iperf3m4.py: using CellId 22862 18:23:12.464631 tst iperf3m4.py: using BVCI 22863 18:23:12.488780 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.501152 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.514317 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.527858 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.541349 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.553465 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.568169 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.582653 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 18:23:12.595462 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:12.718106 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:12.840298 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:12.961106 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 18:23:13.248464 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 18:23:13.378909 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:13.722456 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=791): Launched 18:23:14.008199 run iperf3-srv_10.42.42.10(pid=792): Launched 18:23:14.196139 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 18:23:14.324324 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:14.660400 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Launched 18:23:14.943360 run iperf3-srv_10.42.42.10(pid=794): Launched 18:23:15.132390 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 18:23:15.261515 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:15.596885 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Launched 18:23:15.885114 run iperf3-srv_10.42.42.10(pid=796): Launched 18:23:16.082027 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 18:23:16.210353 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:23:16.542539 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=797): Launched 18:23:16.834758 run iperf3-srv_10.42.42.10(pid=798): Launched 18:23:17.023231 tst iperf3m4.py:8: start network... 18:23:17.150918 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:23:17.703984 run create_hlr_db(pid=799): Launched 18:23:17.894176 bus /gobi_6: Setting Powered False 18:23:18.917928 run create_hlr_db(pid=799): Terminated: ok {rc=0} 18:23:19.377159 run pcap-recorder_any(filters='host 10.42.42.2')(pid=801): Launched 18:23:19.815983 run osmo-hlr_10.42.42.2(pid=802): Launched 18:23:20.059818 run osmo-stp_10.42.42.5: Starting osmo-stp 18:23:20.643661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=804): Launched 18:23:21.070557 run osmo-stp_10.42.42.5(pid=805): Launched 18:23:21.292706 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:23:21.881987 run pcap-recorder_any(filters='host 10.42.42.6')(pid=807): Launched 18:23:22.001165 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:23:22.305609 run patchelf(pid=808): Launched 18:23:22.502006 run osmo-stp_10.42.42.5(pid=805): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=805)] 18:23:22.643844 run osmo-stp_10.42.42.5(pid=805): stdout: | (launched: 2022-12-09_18:23:20.813027) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:22.784712 run osmo-stp_10.42.42.5(pid=805): stderr: | �[0;m�[38;5;43m20221209182321110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182321110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182321111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182321111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:22.920036 run osmo-stp_10.42.42.5(pid=805): stdout: | (launched: 2022-12-09_18:23:20.813027) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:23:23.056075 run osmo-stp_10.42.42.5(pid=805): stderr: | �[0;m�[38;5;43m20221209182321110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209182321110 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209182321111 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209182321111 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209182321112 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:23:23.213678 run patchelf(pid=808): Terminating (SIGINT) 18:23:23.398905 run patchelf(pid=808): Terminated: ok {rc=0} 18:23:23.432934 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=805): Process ended prematurely: osmo-stp_10.42.42.5(pid=805) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=805)] [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 18:23:23.443369 tst iperf3m4.py:8: Test FAILED (11.5 sec) 18:23:23.508664 run osmo-hlr_10.42.42.2(pid=802): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=802)] 18:23:23.562288 run osmo-hlr_10.42.42.2(pid=802): stdout: | (launched: 2022-12-09_18:23:19.543871) 18:23:23.616877 run osmo-hlr_10.42.42.2(pid=802): stderr: | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209182319856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209182319875 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209182319888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209182319888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209182319888 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:23:23.662392 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=791): Terminating (SIGTERM) 18:23:23.707206 run iperf3-srv_10.42.42.10(pid=792): Terminating (SIGTERM) 18:23:23.752215 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Terminating (SIGTERM) 18:23:23.797944 run iperf3-srv_10.42.42.10(pid=794): Terminating (SIGTERM) 18:23:23.842932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Terminating (SIGTERM) 18:23:23.887593 run iperf3-srv_10.42.42.10(pid=796): Terminating (SIGTERM) 18:23:23.932290 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=797): Terminating (SIGTERM) 18:23:23.978137 run iperf3-srv_10.42.42.10(pid=798): Terminating (SIGTERM) 18:23:24.023186 run pcap-recorder_any(filters='host 10.42.42.2')(pid=801): Terminating (SIGTERM) 18:23:24.067844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=804): Terminating (SIGTERM) 18:23:24.111928 run pcap-recorder_any(filters='host 10.42.42.6')(pid=807): Terminating (SIGTERM) 18:23:24.123140 --- ParallelTerminationStrategy: PID 791 died... 18:23:24.183844 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=791): Terminated: ok {rc=0} 18:23:24.194372 --- ParallelTerminationStrategy: PID 792 died... 18:23:24.251652 run iperf3-srv_10.42.42.10(pid=792): Terminated {rc=256} 18:23:24.262734 --- ParallelTerminationStrategy: PID 793 died... 18:23:24.320172 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=793): Terminated: ok {rc=0} 18:23:24.330685 --- ParallelTerminationStrategy: PID 794 died... 18:23:24.389289 run iperf3-srv_10.42.42.10(pid=794): Terminated {rc=256} 18:23:24.400103 --- ParallelTerminationStrategy: PID 795 died... 18:23:24.458495 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=795): Terminated: ok {rc=0} 18:23:24.469642 --- ParallelTerminationStrategy: PID 796 died... 18:23:24.528915 run iperf3-srv_10.42.42.10(pid=796): Terminated {rc=256} 18:23:24.540040 --- ParallelTerminationStrategy: PID 797 died... 18:23:24.598959 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=797): Terminated: ok {rc=0} 18:23:24.610618 --- ParallelTerminationStrategy: PID 798 died... 18:23:24.668342 run iperf3-srv_10.42.42.10(pid=798): Terminated {rc=256} 18:23:24.679894 --- ParallelTerminationStrategy: PID 801 died... 18:23:24.738983 run pcap-recorder_any(filters='host 10.42.42.2')(pid=801): Terminated: ok {rc=0} 18:23:24.749998 --- ParallelTerminationStrategy: PID 804 died... 18:23:24.809684 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=804): Terminated: ok {rc=0} 18:23:24.821132 --- ParallelTerminationStrategy: PID 807 died... 18:23:24.880244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=807): Terminated: ok {rc=0} 18:23:24.971692 bus /gobi_4: Setting Powered False 18:23:26.075953 bus /gobi_4: Setting Powered False 18:23:27.182595 bus /gobi_1: Setting Powered False 18:23:28.288467 bus /gobi_1: Setting Powered False 18:23:29.396110 bus /gobi_0: Setting Powered False 18:23:30.501269 bus /gobi_0: Setting Powered False 18:23:31.614282 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=805): Process ended prematurely: osmo-stp_10.42.42.5(pid=805) [trial-2362↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=805)]