Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=2970): Process ended prematurely: osmo-stp_10.42.42.5(pid=2970) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2970)]
Standard Output
---------------------------------------------- trial-2363 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 18:52:53.497465 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:53.507838 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:52:53.647563 tst cs_paging_gprs_active.py: using LAC 23019 18:52:53.762703 tst cs_paging_gprs_active.py: using RAC 69 18:52:53.877733 tst cs_paging_gprs_active.py: using CellId 23019 18:52:53.993466 tst cs_paging_gprs_active.py: using BVCI 23020 18:52:54.016196 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.026792 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.037142 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.047522 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.057804 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.068113 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.078537 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.088717 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:52:54.099287 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:52:54.216343 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:52:54.490838 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:52:54.615582 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:52:54.924145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2960): Launched 18:52:55.180575 run iperf3-srv_10.42.42.10(pid=2961): Launched 18:52:55.362196 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:52:55.486085 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:52:55.794162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2962): Launched 18:52:56.049759 run iperf3-srv_10.42.42.10(pid=2963): Launched 18:52:56.230783 tst cs_paging_gprs_active.py:38: start network... 18:52:56.354612 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:52:56.831270 run create_hlr_db(pid=2964): Launched 18:52:57.002432 bus /gobi_6: Setting Powered False 18:52:58.024598 run create_hlr_db(pid=2964): Terminated: ok {rc=0} 18:52:58.448307 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2966): Launched 18:52:58.768320 run osmo-hlr_10.42.42.2(pid=2967): Launched 18:52:58.887651 run osmo-stp_10.42.42.5: Starting osmo-stp 18:52:59.440829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2969): Launched 18:52:59.759710 run osmo-stp_10.42.42.5(pid=2970): Launched 18:52:59.876261 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:53:00.431369 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2972): Launched 18:53:00.545770 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:53:00.830431 run patchelf(pid=2973): Launched 18:53:01.034266 run osmo-stp_10.42.42.5(pid=2970): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2970)] 18:53:01.167624 run osmo-stp_10.42.42.5(pid=2970): stdout: | (launched: 2022-12-09_18:52:59.603067) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:01.301565 run osmo-stp_10.42.42.5(pid=2970): stderr: | �[0;m�[38;5;43m20221209185259793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185259793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185259794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185259794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185259794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185259795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185259795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:01.431098 run osmo-stp_10.42.42.5(pid=2970): stdout: | (launched: 2022-12-09_18:52:59.603067) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:53:01.558621 run osmo-stp_10.42.42.5(pid=2970): stderr: | �[0;m�[38;5;43m20221209185259793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209185259793 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209185259794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209185259794 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209185259794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209185259795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209185259795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:53:01.707697 run patchelf(pid=2973): Terminating (SIGINT) 18:53:01.883020 run patchelf(pid=2973): Terminated: ok {rc=0} 18:53:01.922843 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2970): Process ended prematurely: osmo-stp_10.42.42.5(pid=2970) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2970)] [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 18:53:01.933318 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:53:02.005553 run osmo-hlr_10.42.42.2(pid=2967): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2967)] 18:53:02.054742 run osmo-hlr_10.42.42.2(pid=2967): stdout: | (launched: 2022-12-09_18:52:58.610914) 18:53:02.105143 run osmo-hlr_10.42.42.2(pid=2967): stderr: | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209185258808 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209185258820 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209185258829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209185258829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209185258829 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:53:02.147785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2960): Terminating (SIGTERM) 18:53:02.191789 run iperf3-srv_10.42.42.10(pid=2961): Terminating (SIGTERM) 18:53:02.237216 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2962): Terminating (SIGTERM) 18:53:02.276275 run iperf3-srv_10.42.42.10(pid=2963): Terminating (SIGTERM) 18:53:02.321622 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2966): Terminating (SIGTERM) 18:53:02.368034 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2969): Terminating (SIGTERM) 18:53:02.420931 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2972): Terminating (SIGTERM) 18:53:02.433271 --- ParallelTerminationStrategy: PID 2960 died... 18:53:02.492847 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2960): Terminated: ok {rc=0} 18:53:02.502563 --- ParallelTerminationStrategy: PID 2961 died... 18:53:02.561033 run iperf3-srv_10.42.42.10(pid=2961): Terminated {rc=256} 18:53:02.570915 --- ParallelTerminationStrategy: PID 2962 died... 18:53:02.629157 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2962): Terminated: ok {rc=0} 18:53:02.639513 --- ParallelTerminationStrategy: PID 2963 died... 18:53:02.696286 run iperf3-srv_10.42.42.10(pid=2963): Terminated {rc=256} 18:53:02.706929 --- ParallelTerminationStrategy: PID 2966 died... 18:53:02.763033 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2966): Terminated: ok {rc=0} 18:53:02.774522 --- ParallelTerminationStrategy: PID 2969 died... 18:53:02.839921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2969): Terminated: ok {rc=0} 18:53:02.852613 --- ParallelTerminationStrategy: PID 2972 died... 18:53:02.915724 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2972): Terminated: ok {rc=0} 18:53:03.004141 bus /gobi_0: Setting Powered False 18:53:04.107731 bus /gobi_0: Setting Powered False 18:53:05.219254 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2970): Process ended prematurely: osmo-stp_10.42.42.5(pid=2970) [trial-2363↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2970)]