Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=2546): Process ended prematurely: osmo-stp_10.42.42.5(pid=2546) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2546)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 18:46:55.592182 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:55.603322 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:46:55.746904 tst ping_idle_ping.py: using LAC 22986 18:46:55.862080 tst ping_idle_ping.py: using RAC 36 18:46:55.977842 tst ping_idle_ping.py: using CellId 22986 18:46:56.093586 tst ping_idle_ping.py: using BVCI 22987 18:46:56.116289 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.127025 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.137513 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.147795 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.158263 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.168622 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.179207 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:46:56.189617 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:46:56.478103 tst ping_idle_ping.py:24: start network... 18:46:56.610526 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:57.110630 run create_hlr_db(pid=2540): Launched 18:46:57.294427 bus /gobi_6: Setting Powered False 18:46:58.315456 run create_hlr_db(pid=2540): Terminated: ok {rc=0} 18:46:58.711956 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2542): Launched 18:46:59.009366 run osmo-hlr_10.42.42.2(pid=2543): Launched 18:46:59.122189 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:59.641125 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2545): Launched 18:46:59.937516 run osmo-stp_10.42.42.5(pid=2546): Launched 18:47:00.044249 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:47:00.557371 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2548): Launched 18:47:00.661709 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:47:00.955394 run patchelf(pid=2549): Launched 18:47:01.131986 run osmo-stp_10.42.42.5(pid=2546): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2546)] 18:47:01.260198 run osmo-stp_10.42.42.5(pid=2546): stdout: | (launched: 2022-12-09_18:46:59.791874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:01.389115 run osmo-stp_10.42.42.5(pid=2546): stderr: | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184659963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:01.513228 run osmo-stp_10.42.42.5(pid=2546): stdout: | (launched: 2022-12-09_18:46:59.791874) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:47:01.637188 run osmo-stp_10.42.42.5(pid=2546): stderr: | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184659962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184659963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184659963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:47:01.785452 run patchelf(pid=2549): Terminating (SIGINT) 18:47:01.967533 run patchelf(pid=2549): Terminated: ok {rc=0} 18:47:02.001590 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=2546): Process ended prematurely: osmo-stp_10.42.42.5(pid=2546) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2546)] [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 18:47:02.011919 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 18:47:02.080226 run osmo-hlr_10.42.42.2(pid=2543): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2543)] 18:47:02.133986 run osmo-hlr_10.42.42.2(pid=2543): stdout: | (launched: 2022-12-09_18:46:58.863094) 18:47:02.189570 run osmo-hlr_10.42.42.2(pid=2543): stderr: | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184659039 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184659052 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184659062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184659062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184659062 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:47:02.233791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2542): Terminating (SIGTERM) 18:47:02.275706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2545): Terminating (SIGTERM) 18:47:02.318517 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2548): Terminating (SIGTERM) 18:47:02.328487 --- ParallelTerminationStrategy: PID 2542 died... 18:47:02.385929 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2542): Terminated: ok {rc=0} 18:47:02.395961 --- ParallelTerminationStrategy: PID 2545 died... 18:47:02.452072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2545): Terminated: ok {rc=0} 18:47:02.462284 --- ParallelTerminationStrategy: PID 2548 died... 18:47:02.518309 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2548): Terminated: ok {rc=0} 18:47:02.607698 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2546): Process ended prematurely: osmo-stp_10.42.42.5(pid=2546) [trial-2363↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2546)]