Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5336): Process ended prematurely: osmo-stp_10.42.42.5(pid=5336) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5336)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:11:29.607981 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:29.618954 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:11:29.774731 tst cs_paging_gprs_active.py: using LAC 23117 19:11:29.893341 tst cs_paging_gprs_active.py: using RAC 167 19:11:30.014087 tst cs_paging_gprs_active.py: using CellId 23117 19:11:30.133379 tst cs_paging_gprs_active.py: using BVCI 23118 19:11:30.156726 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.167703 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.178432 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.189112 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.199748 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.210459 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.221189 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.231759 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:11:30.243099 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:11:30.363353 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:11:30.646998 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:11:30.775196 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:11:31.110893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5326): Launched 19:11:31.393674 run iperf3-srv_10.42.42.10(pid=5327): Launched 19:11:31.584598 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:11:31.714333 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:11:32.087264 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5328): Launched 19:11:32.403890 run iperf3-srv_10.42.42.10(pid=5329): Launched 19:11:32.591657 tst cs_paging_gprs_active.py:38: start network... 19:11:32.719526 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:11:33.209832 run create_hlr_db(pid=5330): Launched 19:11:33.386143 bus /gobi_6: Setting Powered False 19:11:34.407472 run create_hlr_db(pid=5330): Terminated: ok {rc=0} 19:11:34.844675 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5332): Launched 19:11:35.174712 run osmo-hlr_10.42.42.2(pid=5333): Launched 19:11:35.296776 run osmo-stp_10.42.42.5: Starting osmo-stp 19:11:35.869136 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5335): Launched 19:11:36.198106 run osmo-stp_10.42.42.5(pid=5336): Launched 19:11:36.318018 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:11:36.893116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5338): Launched 19:11:37.010927 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:11:37.296818 run patchelf(pid=5339): Launched 19:11:37.489719 run osmo-stp_10.42.42.5(pid=5336): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5336)] 19:11:37.630829 run osmo-stp_10.42.42.5(pid=5336): stdout: | (launched: 2022-12-09_19:11:36.036877) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:11:37.772054 run osmo-stp_10.42.42.5(pid=5336): stderr: | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191136234 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:11:37.907893 run osmo-stp_10.42.42.5(pid=5336): stdout: | (launched: 2022-12-09_19:11:36.036877) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:11:38.043019 run osmo-stp_10.42.42.5(pid=5336): stderr: | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191136233 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191136234 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191136234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:11:38.199648 run patchelf(pid=5339): Terminating (SIGINT) 19:11:38.383287 run patchelf(pid=5339): Terminated: ok {rc=0} 19:11:38.417054 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5336): Process ended prematurely: osmo-stp_10.42.42.5(pid=5336) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5336)] [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:11:38.427161 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:11:38.490385 run osmo-hlr_10.42.42.2(pid=5333): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5333)] 19:11:38.541652 run osmo-hlr_10.42.42.2(pid=5333): stdout: | (launched: 2022-12-09_19:11:35.012204) 19:11:38.593656 run osmo-hlr_10.42.42.2(pid=5333): stderr: | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209191135211 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209191135226 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209191135234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209191135234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209191135234 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:11:38.637932 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5326): Terminating (SIGTERM) 19:11:38.679545 run iperf3-srv_10.42.42.10(pid=5327): Terminating (SIGTERM) 19:11:38.721269 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5328): Terminating (SIGTERM) 19:11:38.763040 run iperf3-srv_10.42.42.10(pid=5329): Terminating (SIGTERM) 19:11:38.804466 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5332): Terminating (SIGTERM) 19:11:38.846440 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5335): Terminating (SIGTERM) 19:11:38.887774 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5338): Terminating (SIGTERM) 19:11:38.897607 --- ParallelTerminationStrategy: PID 5326 died... 19:11:38.953443 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5326): Terminated: ok {rc=0} 19:11:38.963449 --- ParallelTerminationStrategy: PID 5327 died... 19:11:39.018989 run iperf3-srv_10.42.42.10(pid=5327): Terminated {rc=256} 19:11:39.028895 --- ParallelTerminationStrategy: PID 5328 died... 19:11:39.084447 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5328): Terminated: ok {rc=0} 19:11:39.094374 --- ParallelTerminationStrategy: PID 5329 died... 19:11:39.149687 run iperf3-srv_10.42.42.10(pid=5329): Terminated {rc=256} 19:11:39.159578 --- ParallelTerminationStrategy: PID 5332 died... 19:11:39.214813 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5332): Terminated: ok {rc=0} 19:11:39.224746 --- ParallelTerminationStrategy: PID 5335 died... 19:11:39.280078 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5335): Terminated: ok {rc=0} 19:11:39.290022 --- ParallelTerminationStrategy: PID 5338 died... 19:11:39.345203 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5338): Terminated: ok {rc=0} 19:11:39.431608 bus /gobi_0: Setting Powered False 19:11:40.536702 bus /gobi_0: Setting Powered False 19:11:41.644002 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5336): Process ended prematurely: osmo-stp_10.42.42.5(pid=5336) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5336)]