Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4662): Process ended prematurely: osmo-stp_10.42.42.5(pid=4662) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4662)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:09:28.620658 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:28.631405 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:09:28.770066 tst cs_paging_gprs_active.py: using LAC 23107 19:09:28.890147 tst cs_paging_gprs_active.py: using RAC 157 19:09:29.010211 tst cs_paging_gprs_active.py: using CellId 23107 19:09:29.129567 tst cs_paging_gprs_active.py: using BVCI 23108 19:09:29.152816 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.163596 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.174214 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.184815 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.195273 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.205823 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.216410 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.226838 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:09:29.237567 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:09:29.356419 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:09:29.652788 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:09:29.790581 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:09:30.128909 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4652): Launched 19:09:30.410285 run iperf3-srv_10.42.42.10(pid=4653): Launched 19:09:30.613239 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:09:30.750300 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:09:31.122594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4654): Launched 19:09:31.410923 run iperf3-srv_10.42.42.10(pid=4655): Launched 19:09:31.604567 tst cs_paging_gprs_active.py:38: start network... 19:09:31.738942 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:09:32.278765 run create_hlr_db(pid=4656): Launched 19:09:32.456622 bus /gobi_6: Setting Powered False 19:09:33.477490 run create_hlr_db(pid=4656): Terminated: ok {rc=0} 19:09:33.912527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4658): Launched 19:09:34.239496 run osmo-hlr_10.42.42.2(pid=4659): Launched 19:09:34.359039 run osmo-stp_10.42.42.5: Starting osmo-stp 19:09:34.928180 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4661): Launched 19:09:35.255475 run osmo-stp_10.42.42.5(pid=4662): Launched 19:09:35.374931 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:09:35.944446 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4664): Launched 19:09:36.061663 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:09:36.346163 run patchelf(pid=4665): Launched 19:09:36.537401 run osmo-stp_10.42.42.5(pid=4662): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4662)] 19:09:36.677452 run osmo-stp_10.42.42.5(pid=4662): stdout: | (launched: 2022-12-09_19:09:35.095055) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:09:36.817519 run osmo-stp_10.42.42.5(pid=4662): stderr: | �[0;m�[38;5;43m20221209190935282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190935283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190935283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190935283 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:09:36.952678 run osmo-stp_10.42.42.5(pid=4662): stdout: | (launched: 2022-12-09_19:09:35.095055) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:09:37.086769 run osmo-stp_10.42.42.5(pid=4662): stderr: | �[0;m�[38;5;43m20221209190935282 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190935283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190935283 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190935283 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190935284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:09:37.242381 run patchelf(pid=4665): Terminating (SIGINT) 19:09:37.424343 run patchelf(pid=4665): Terminated: ok {rc=0} 19:09:37.457782 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4662): Process ended prematurely: osmo-stp_10.42.42.5(pid=4662) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4662)] [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:09:37.467660 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:09:37.530335 run osmo-hlr_10.42.42.2(pid=4659): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4659)] 19:09:37.581734 run osmo-hlr_10.42.42.2(pid=4659): stdout: | (launched: 2022-12-09_19:09:34.079130) 19:09:37.633467 run osmo-hlr_10.42.42.2(pid=4659): stderr: | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209190934274 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209190934286 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209190934295 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209190934296 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209190934296 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:09:37.677181 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4652): Terminating (SIGTERM) 19:09:37.718550 run iperf3-srv_10.42.42.10(pid=4653): Terminating (SIGTERM) 19:09:37.760124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4654): Terminating (SIGTERM) 19:09:37.801716 run iperf3-srv_10.42.42.10(pid=4655): Terminating (SIGTERM) 19:09:37.842868 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4658): Terminating (SIGTERM) 19:09:37.884184 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4661): Terminating (SIGTERM) 19:09:37.926415 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4664): Terminating (SIGTERM) 19:09:37.935931 --- ParallelTerminationStrategy: PID 4652 died... 19:09:37.991459 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4652): Terminated: ok {rc=0} 19:09:38.001418 --- ParallelTerminationStrategy: PID 4653 died... 19:09:38.056411 run iperf3-srv_10.42.42.10(pid=4653): Terminated {rc=256} 19:09:38.066277 --- ParallelTerminationStrategy: PID 4654 died... 19:09:38.121376 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4654): Terminated: ok {rc=0} 19:09:38.131204 --- ParallelTerminationStrategy: PID 4655 died... 19:09:38.186177 run iperf3-srv_10.42.42.10(pid=4655): Terminated {rc=256} 19:09:38.196091 --- ParallelTerminationStrategy: PID 4658 died... 19:09:38.251139 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4658): Terminated: ok {rc=0} 19:09:38.261158 --- ParallelTerminationStrategy: PID 4661 died... 19:09:38.316156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4661): Terminated: ok {rc=0} 19:09:38.326094 --- ParallelTerminationStrategy: PID 4664 died... 19:09:38.381543 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4664): Terminated: ok {rc=0} 19:09:38.466287 bus /gobi_0: Setting Powered False 19:09:39.572573 bus /gobi_0: Setting Powered False 19:09:40.678973 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4662): Process ended prematurely: osmo-stp_10.42.42.5(pid=4662) [trial-2363↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4662)]