Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16680): Process ended prematurely: osmo-stp_10.42.42.5(pid=16680) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16680)]
Standard Output
---------------------------------------------- trial-2364 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 21:17:43.450992 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:43.462971 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:17:43.603725 tst iperf3m4.py: using LAC 23784 21:17:43.723691 tst iperf3m4.py: using RAC 69 21:17:43.843426 tst iperf3m4.py: using CellId 23784 21:17:43.966577 tst iperf3m4.py: using BVCI 23785 21:17:43.989910 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.001252 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.012324 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.023921 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.035339 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.046685 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.058148 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.069583 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:44.081169 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:44.200055 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:44.317499 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:44.438896 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:44.738694 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 21:17:44.875777 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:45.214363 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16666): Launched 21:17:45.495730 run iperf3-srv_10.42.42.10(pid=16667): Launched 21:17:45.696393 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 21:17:45.835661 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:46.194863 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16668): Launched 21:17:46.485652 run iperf3-srv_10.42.42.10(pid=16669): Launched 21:17:46.689541 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 21:17:46.828663 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:47.179509 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16670): Launched 21:17:47.461836 run iperf3-srv_10.42.42.10(pid=16671): Launched 21:17:47.661837 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 21:17:47.797334 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:48.133591 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16672): Launched 21:17:48.414676 run iperf3-srv_10.42.42.10(pid=16673): Launched 21:17:48.614465 tst iperf3m4.py:8: start network... 21:17:48.750514 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:49.271658 run create_hlr_db(pid=16674): Launched 21:17:49.459728 bus /gobi_6: Setting Powered False 21:17:50.481751 run create_hlr_db(pid=16674): Terminated: ok {rc=0} 21:17:50.915121 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16676): Launched 21:17:51.243135 run osmo-hlr_10.42.42.2(pid=16677): Launched 21:17:51.361981 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:51.928326 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16679): Launched 21:17:52.256817 run osmo-stp_10.42.42.5(pid=16680): Launched 21:17:52.375243 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:52.945189 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16682): Launched 21:17:53.061744 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:53.346629 run patchelf(pid=16683): Launched 21:17:53.536798 run osmo-stp_10.42.42.5(pid=16680): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16680)] 21:17:53.675627 run osmo-stp_10.42.42.5(pid=16680): stdout: | (launched: 2022-12-09_21:17:52.094669) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:53.814922 run osmo-stp_10.42.42.5(pid=16680): stderr: | �[0;m�[38;5;43m20221209211752286 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211752287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211752287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211752287 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:53.949395 run osmo-stp_10.42.42.5(pid=16680): stdout: | (launched: 2022-12-09_21:17:52.094669) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:54.082359 run osmo-stp_10.42.42.5(pid=16680): stderr: | �[0;m�[38;5;43m20221209211752286 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211752287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211752287 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211752287 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211752288 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:54.237544 run patchelf(pid=16683): Terminating (SIGINT) 21:17:54.419973 run patchelf(pid=16683): Terminated: ok {rc=0} 21:17:54.453732 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16680): Process ended prematurely: osmo-stp_10.42.42.5(pid=16680) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16680)] [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 21:17:54.464000 tst iperf3m4.py:8: Test FAILED (11.0 sec) 21:17:54.526654 run osmo-hlr_10.42.42.2(pid=16677): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16677)] 21:17:54.577485 run osmo-hlr_10.42.42.2(pid=16677): stdout: | (launched: 2022-12-09_21:17:51.080334) 21:17:54.629002 run osmo-hlr_10.42.42.2(pid=16677): stderr: | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209211751278 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209211751290 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209211751299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209211751299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209211751299 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:17:54.672818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16666): Terminating (SIGTERM) 21:17:54.714038 run iperf3-srv_10.42.42.10(pid=16667): Terminating (SIGTERM) 21:17:54.755277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16668): Terminating (SIGTERM) 21:17:54.796323 run iperf3-srv_10.42.42.10(pid=16669): Terminating (SIGTERM) 21:17:54.837516 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16670): Terminating (SIGTERM) 21:17:54.878524 run iperf3-srv_10.42.42.10(pid=16671): Terminating (SIGTERM) 21:17:54.919625 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16672): Terminating (SIGTERM) 21:17:54.960600 run iperf3-srv_10.42.42.10(pid=16673): Terminating (SIGTERM) 21:17:55.001968 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16676): Terminating (SIGTERM) 21:17:55.043097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16679): Terminating (SIGTERM) 21:17:55.084450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16682): Terminating (SIGTERM) 21:17:55.094041 --- ParallelTerminationStrategy: PID 16666 died... 21:17:55.149786 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16666): Terminated: ok {rc=0} 21:17:55.159745 --- ParallelTerminationStrategy: PID 16667 died... 21:17:55.214763 run iperf3-srv_10.42.42.10(pid=16667): Terminated {rc=256} 21:17:55.224621 --- ParallelTerminationStrategy: PID 16668 died... 21:17:55.279680 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16668): Terminated: ok {rc=0} 21:17:55.289643 --- ParallelTerminationStrategy: PID 16669 died... 21:17:55.344637 run iperf3-srv_10.42.42.10(pid=16669): Terminated {rc=256} 21:17:55.354579 --- ParallelTerminationStrategy: PID 16670 died... 21:17:55.410328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16670): Terminated: ok {rc=0} 21:17:55.420266 --- ParallelTerminationStrategy: PID 16671 died... 21:17:55.475634 run iperf3-srv_10.42.42.10(pid=16671): Terminated {rc=256} 21:17:55.485660 --- ParallelTerminationStrategy: PID 16672 died... 21:17:55.540650 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16672): Terminated: ok {rc=0} 21:17:55.550630 --- ParallelTerminationStrategy: PID 16673 died... 21:17:55.606038 run iperf3-srv_10.42.42.10(pid=16673): Terminated {rc=256} 21:17:55.616108 --- ParallelTerminationStrategy: PID 16676 died... 21:17:55.671505 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16676): Terminated: ok {rc=0} 21:17:55.681617 --- ParallelTerminationStrategy: PID 16679 died... 21:17:55.737338 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16679): Terminated: ok {rc=0} 21:17:55.747326 --- ParallelTerminationStrategy: PID 16682 died... 21:17:55.802610 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16682): Terminated: ok {rc=0} 21:17:55.889802 bus /gobi_4: Setting Powered False 21:17:56.996098 bus /gobi_4: Setting Powered False 21:17:58.104734 bus /gobi_1: Setting Powered False 21:17:59.212229 bus /gobi_1: Setting Powered False 21:18:00.319829 bus /gobi_0: Setting Powered False 21:18:01.426829 bus /gobi_0: Setting Powered False 21:18:02.533927 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16680): Process ended prematurely: osmo-stp_10.42.42.5(pid=16680) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16680)]