Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16646): Process ended prematurely: osmo-stp_10.42.42.5(pid=16646) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16646)]
Standard Output
---------------------------------------------- trial-2364 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 21:17:21.330127 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.341943 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 21:17:21.487421 tst cs_paging_gprs_active.py: using LAC 23782 21:17:21.609231 tst cs_paging_gprs_active.py: using RAC 67 21:17:21.735087 tst cs_paging_gprs_active.py: using CellId 23782 21:17:21.861415 tst cs_paging_gprs_active.py: using BVCI 23783 21:17:21.886491 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.898238 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.909821 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.921522 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.933088 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.944437 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.956082 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.967733 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 21:17:21.979525 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:22.102427 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 21:17:22.382360 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:17:22.509826 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:22.824326 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16636): Launched 21:17:23.088013 run iperf3-srv_10.42.42.10(pid=16637): Launched 21:17:23.273584 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:17:23.400631 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:17:23.715200 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16638): Launched 21:17:23.976177 run iperf3-srv_10.42.42.10(pid=16639): Launched 21:17:24.161685 tst cs_paging_gprs_active.py:38: start network... 21:17:24.288319 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:17:24.791233 run create_hlr_db(pid=16640): Launched 21:17:24.978962 bus /gobi_6: Setting Powered False 21:17:26.000322 run create_hlr_db(pid=16640): Terminated: ok {rc=0} 21:17:26.410406 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16642): Launched 21:17:26.717301 run osmo-hlr_10.42.42.2(pid=16643): Launched 21:17:26.837032 run osmo-stp_10.42.42.5: Starting osmo-stp 21:17:27.372624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16645): Launched 21:17:27.678590 run osmo-stp_10.42.42.5(pid=16646): Launched 21:17:27.790279 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:17:28.322579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16648): Launched 21:17:28.431954 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:17:28.698540 run patchelf(pid=16649): Launched 21:17:28.876551 run osmo-stp_10.42.42.5(pid=16646): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16646)] 21:17:29.007038 run osmo-stp_10.42.42.5(pid=16646): stdout: | (launched: 2022-12-09_21:17:27.528162) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:29.137762 run osmo-stp_10.42.42.5(pid=16646): stderr: | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211727700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:29.263577 run osmo-stp_10.42.42.5(pid=16646): stdout: | (launched: 2022-12-09_21:17:27.528162) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:17:29.388360 run osmo-stp_10.42.42.5(pid=16646): stderr: | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209211727699 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209211727700 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209211727702 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:17:29.534610 run patchelf(pid=16649): Terminating (SIGINT) 21:17:29.705869 run patchelf(pid=16649): Terminated: ok {rc=0} 21:17:29.737584 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16646): Process ended prematurely: osmo-stp_10.42.42.5(pid=16646) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16646)] [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 21:17:29.747071 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 21:17:29.807737 run osmo-hlr_10.42.42.2(pid=16643): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16643)] 21:17:29.856908 run osmo-hlr_10.42.42.2(pid=16643): stdout: | (launched: 2022-12-09_21:17:26.565882) 21:17:29.907288 run osmo-hlr_10.42.42.2(pid=16643): stderr: | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209211726744 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209211726756 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209211726764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209211726764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209211726764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:17:29.949098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16636): Terminating (SIGTERM) 21:17:29.988820 run iperf3-srv_10.42.42.10(pid=16637): Terminating (SIGTERM) 21:17:30.028559 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16638): Terminating (SIGTERM) 21:17:30.068481 run iperf3-srv_10.42.42.10(pid=16639): Terminating (SIGTERM) 21:17:30.108485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16642): Terminating (SIGTERM) 21:17:30.147890 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16645): Terminating (SIGTERM) 21:17:30.187686 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16648): Terminating (SIGTERM) 21:17:30.196916 --- ParallelTerminationStrategy: PID 16636 died... 21:17:30.250653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16636): Terminated: ok {rc=0} 21:17:30.260111 --- ParallelTerminationStrategy: PID 16637 died... 21:17:30.312645 run iperf3-srv_10.42.42.10(pid=16637): Terminated {rc=256} 21:17:30.322245 --- ParallelTerminationStrategy: PID 16638 died... 21:17:30.375441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16638): Terminated: ok {rc=0} 21:17:30.385121 --- ParallelTerminationStrategy: PID 16639 died... 21:17:30.437685 run iperf3-srv_10.42.42.10(pid=16639): Terminated {rc=256} 21:17:30.447319 --- ParallelTerminationStrategy: PID 16642 died... 21:17:30.500188 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16642): Terminated: ok {rc=0} 21:17:30.509702 --- ParallelTerminationStrategy: PID 16645 died... 21:17:30.562805 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16645): Terminated: ok {rc=0} 21:17:30.572476 --- ParallelTerminationStrategy: PID 16648 died... 21:17:30.625567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16648): Terminated: ok {rc=0} 21:17:30.714124 bus /gobi_0: Setting Powered False 21:17:31.836054 bus /gobi_0: Setting Powered False 21:17:32.946175 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16646): Process ended prematurely: osmo-stp_10.42.42.5(pid=16646) [trial-2364↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16646)]