Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=10841): Process ended prematurely: osmo-stp_10.42.42.5(pid=10841) [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10841)]
Standard Output
---------------------------------------------- trial-2364 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 20:18:29.653667 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:29.664514 tst gprs:oc2g: Using 1 x bts (candidates: 1) 20:18:29.794860 tst cs_paging_gprs_active.py: using LAC 23470 20:18:29.925551 tst cs_paging_gprs_active.py: using RAC 10 20:18:30.056648 tst cs_paging_gprs_active.py: using CellId 23470 20:18:30.185480 tst cs_paging_gprs_active.py: using BVCI 23471 20:18:30.210820 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.221667 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.232294 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.243024 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.253853 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.264480 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.275244 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.285969 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 20:18:30.296719 tst gprs:oc2g: Using 1 x modem (candidates: 4) 20:18:30.419781 tst gprs:oc2g: Using 1 x modem (candidates: 4) 20:18:30.721355 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:18:30.859571 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:18:31.223162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10831): Launched 20:18:31.512014 run iperf3-srv_10.42.42.10(pid=10832): Launched 20:18:31.707174 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:18:31.842248 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:18:32.177047 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10833): Launched 20:18:32.466033 run iperf3-srv_10.42.42.10(pid=10834): Launched 20:18:32.654821 tst cs_paging_gprs_active.py:38: start network... 20:18:32.783651 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:18:33.269313 run create_hlr_db(pid=10835): Launched 20:18:33.446983 bus /sierra_2: Setting Powered False 20:18:34.468142 run create_hlr_db(pid=10835): Terminated: ok {rc=0} 20:18:34.876431 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10837): Launched 20:18:35.185124 run osmo-hlr_10.42.42.2(pid=10838): Launched 20:18:35.305574 run osmo-stp_10.42.42.5: Starting osmo-stp 20:18:35.848245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10840): Launched 20:18:36.155351 run osmo-stp_10.42.42.5(pid=10841): Launched 20:18:36.268202 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:18:36.801288 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10843): Launched 20:18:36.911001 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:18:37.179867 run patchelf(pid=10844): Launched 20:18:37.359763 run osmo-stp_10.42.42.5(pid=10841): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10841)] 20:18:37.491221 run osmo-stp_10.42.42.5(pid=10841): stdout: | (launched: 2022-12-09_20:18:36.003940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:18:37.622960 run osmo-stp_10.42.42.5(pid=10841): stderr: | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201836174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201836174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201836174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201836175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:18:37.749714 run osmo-stp_10.42.42.5(pid=10841): stdout: | (launched: 2022-12-09_20:18:36.003940) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:18:37.875534 run osmo-stp_10.42.42.5(pid=10841): stderr: | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201836173 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201836174 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201836174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201836174 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201836175 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:18:38.022949 run patchelf(pid=10844): Terminating (SIGINT) 20:18:38.195809 run patchelf(pid=10844): Terminated: ok {rc=0} 20:18:38.227524 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10841): Process ended prematurely: osmo-stp_10.42.42.5(pid=10841) [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10841)] [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py:38] 20:18:38.236820 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 20:18:38.298204 run osmo-hlr_10.42.42.2(pid=10838): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10838)] 20:18:38.347406 run osmo-hlr_10.42.42.2(pid=10838): stdout: | (launched: 2022-12-09_20:18:35.032668) 20:18:38.397129 run osmo-hlr_10.42.42.2(pid=10838): stderr: | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201835210 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201835221 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201835230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201835230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201835230 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:18:38.439044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10831): Terminating (SIGTERM) 20:18:38.478878 run iperf3-srv_10.42.42.10(pid=10832): Terminating (SIGTERM) 20:18:38.518579 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10833): Terminating (SIGTERM) 20:18:38.558262 run iperf3-srv_10.42.42.10(pid=10834): Terminating (SIGTERM) 20:18:38.598072 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10837): Terminating (SIGTERM) 20:18:38.637849 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10840): Terminating (SIGTERM) 20:18:38.677738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10843): Terminating (SIGTERM) 20:18:38.687259 --- ParallelTerminationStrategy: PID 10831 died... 20:18:38.740274 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10831): Terminated: ok {rc=0} 20:18:38.750200 --- ParallelTerminationStrategy: PID 10832 died... 20:18:38.803097 run iperf3-srv_10.42.42.10(pid=10832): Terminated {rc=256} 20:18:38.812874 --- ParallelTerminationStrategy: PID 10833 died... 20:18:38.865824 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10833): Terminated: ok {rc=0} 20:18:38.875662 --- ParallelTerminationStrategy: PID 10834 died... 20:18:38.928282 run iperf3-srv_10.42.42.10(pid=10834): Terminated {rc=256} 20:18:38.938105 --- ParallelTerminationStrategy: PID 10837 died... 20:18:38.990988 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10837): Terminated: ok {rc=0} 20:18:39.000812 --- ParallelTerminationStrategy: PID 10840 died... 20:18:39.053778 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10840): Terminated: ok {rc=0} 20:18:39.063647 --- ParallelTerminationStrategy: PID 10843 died... 20:18:39.116365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10843): Terminated: ok {rc=0} 20:18:39.199050 bus /gobi_0: Setting Powered False 20:18:40.301087 bus /gobi_0: Setting Powered False 20:18:41.410772 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10841): Process ended prematurely: osmo-stp_10.42.42.5(pid=10841) [trial-2364↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10841)]