Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10417): Process ended prematurely: osmo-stp_10.42.42.5(pid=10417) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10417)]
Standard Output
---------------------------------------------- trial-2364 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 20:12:37.513402 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:37.524216 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:12:37.667941 tst cs_paging_gprs_active.py: using LAC 23438 20:12:37.788198 tst cs_paging_gprs_active.py: using RAC 233 20:12:37.908205 tst cs_paging_gprs_active.py: using CellId 23438 20:12:38.028018 tst cs_paging_gprs_active.py: using BVCI 23439 20:12:38.051470 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.062271 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.073019 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.083886 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.094724 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.105518 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.116437 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.127419 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:12:38.138566 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:12:38.258554 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:12:38.561057 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:12:38.698404 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:12:39.037353 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10407): Launched 20:12:39.318909 run iperf3-srv_10.42.42.10(pid=10408): Launched 20:12:39.519421 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:12:39.655946 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:12:39.994124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10409): Launched 20:12:40.274590 run iperf3-srv_10.42.42.10(pid=10410): Launched 20:12:40.476218 tst cs_paging_gprs_active.py:38: start network... 20:12:40.614084 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:12:41.137056 run create_hlr_db(pid=10411): Launched 20:12:41.326385 bus /gobi_6: Setting Powered False 20:12:42.347429 run create_hlr_db(pid=10411): Terminated: ok {rc=0} 20:12:42.759348 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10413): Launched 20:12:43.065849 run osmo-hlr_10.42.42.2(pid=10414): Launched 20:12:43.188645 run osmo-stp_10.42.42.5: Starting osmo-stp 20:12:43.725776 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10416): Launched 20:12:44.031103 run osmo-stp_10.42.42.5(pid=10417): Launched 20:12:44.142917 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:12:44.678113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10419): Launched 20:12:44.787382 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:12:45.053798 run patchelf(pid=10420): Launched 20:12:45.233379 run osmo-stp_10.42.42.5(pid=10417): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10417)] 20:12:45.363834 run osmo-stp_10.42.42.5(pid=10417): stdout: | (launched: 2022-12-09_20:12:43.881202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:12:45.495189 run osmo-stp_10.42.42.5(pid=10417): stderr: | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201244049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:12:45.621784 run osmo-stp_10.42.42.5(pid=10417): stdout: | (launched: 2022-12-09_20:12:43.881202) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:12:45.747592 run osmo-stp_10.42.42.5(pid=10417): stderr: | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201244048 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201244049 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201244049 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:12:45.920337 run patchelf(pid=10420): Terminating (SIGINT) 20:12:46.109549 run patchelf(pid=10420): Terminated: ok {rc=0} 20:12:46.145448 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10417): Process ended prematurely: osmo-stp_10.42.42.5(pid=10417) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10417)] [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 20:12:46.156720 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:12:46.222536 run osmo-hlr_10.42.42.2(pid=10414): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10414)] 20:12:46.274799 run osmo-hlr_10.42.42.2(pid=10414): stdout: | (launched: 2022-12-09_20:12:42.915553) 20:12:46.329092 run osmo-hlr_10.42.42.2(pid=10414): stderr: | �[0;m�[1;31m20221209201243087 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201243087 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201243087 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201243087 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201243087 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201243088 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201243099 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201243107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201243108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201243108 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:12:46.374851 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10407): Terminating (SIGTERM) 20:12:46.420012 run iperf3-srv_10.42.42.10(pid=10408): Terminating (SIGTERM) 20:12:46.465276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10409): Terminating (SIGTERM) 20:12:46.507756 run iperf3-srv_10.42.42.10(pid=10410): Terminating (SIGTERM) 20:12:46.551536 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10413): Terminating (SIGTERM) 20:12:46.596044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10416): Terminating (SIGTERM) 20:12:46.640887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10419): Terminating (SIGTERM) 20:12:46.651217 --- ParallelTerminationStrategy: PID 10407 died... 20:12:46.711895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10407): Terminated: ok {rc=0} 20:12:46.723364 --- ParallelTerminationStrategy: PID 10408 died... 20:12:46.779964 run iperf3-srv_10.42.42.10(pid=10408): Terminated {rc=256} 20:12:46.790731 --- ParallelTerminationStrategy: PID 10409 died... 20:12:46.846975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10409): Terminated: ok {rc=0} 20:12:46.857394 --- ParallelTerminationStrategy: PID 10410 died... 20:12:46.914853 run iperf3-srv_10.42.42.10(pid=10410): Terminated {rc=256} 20:12:46.925340 --- ParallelTerminationStrategy: PID 10413 died... 20:12:46.982446 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10413): Terminated: ok {rc=0} 20:12:46.993003 --- ParallelTerminationStrategy: PID 10416 died... 20:12:47.049847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10416): Terminated: ok {rc=0} 20:12:47.060348 --- ParallelTerminationStrategy: PID 10419 died... 20:12:47.119364 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10419): Terminated: ok {rc=0} 20:12:47.208380 bus /gobi_0: Setting Powered False 20:12:48.311682 bus /gobi_0: Setting Powered False 20:12:49.421844 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10417): Process ended prematurely: osmo-stp_10.42.42.5(pid=10417) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10417)]