Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10467): Process ended prematurely: osmo-stp_10.42.42.5(pid=10467) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10467)]
Standard Output
---------------------------------------------- trial-2364 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 20:13:28.271963 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.283854 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:13:28.442376 tst ping_idle_ping.py: using LAC 23442 20:13:28.563081 tst ping_idle_ping.py: using RAC 237 20:13:28.680600 tst ping_idle_ping.py: using CellId 23442 20:13:28.799881 tst ping_idle_ping.py: using BVCI 23443 20:13:28.823160 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.834158 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.844936 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.856198 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.867245 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.878152 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.889259 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:13:28.900326 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:13:29.193741 tst ping_idle_ping.py:24: start network... 20:13:29.327576 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:13:29.804647 run create_hlr_db(pid=10461): Launched 20:13:29.978781 bus /gobi_6: Setting Powered False 20:13:31.030240 run create_hlr_db(pid=10461): Terminated: ok {rc=0} 20:13:31.457108 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10463): Launched 20:13:31.903849 run osmo-hlr_10.42.42.2(pid=10464): Launched 20:13:32.135982 run osmo-stp_10.42.42.5: Starting osmo-stp 20:13:32.666373 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10466): Launched 20:13:32.970156 run osmo-stp_10.42.42.5(pid=10467): Launched 20:13:33.080850 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:13:33.606538 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10469): Launched 20:13:33.713909 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:13:33.977262 run patchelf(pid=10470): Launched 20:13:34.153264 run osmo-stp_10.42.42.5(pid=10467): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10467)] 20:13:34.282060 run osmo-stp_10.42.42.5(pid=10467): stdout: | (launched: 2022-12-09_20:13:32.819280) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:34.411827 run osmo-stp_10.42.42.5(pid=10467): stderr: | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201332991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:34.536838 run osmo-stp_10.42.42.5(pid=10467): stdout: | (launched: 2022-12-09_20:13:32.819280) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:13:34.660465 run osmo-stp_10.42.42.5(pid=10467): stderr: | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201332990 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201332991 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201332991 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:13:34.804551 run patchelf(pid=10470): Terminating (SIGINT) 20:13:34.974059 run patchelf(pid=10470): Terminated: ok {rc=0} 20:13:35.004817 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10467): Process ended prematurely: osmo-stp_10.42.42.5(pid=10467) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10467)] [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 20:13:35.013615 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 20:13:35.074421 run osmo-hlr_10.42.42.2(pid=10464): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10464)] 20:13:35.123446 run osmo-hlr_10.42.42.2(pid=10464): stdout: | (launched: 2022-12-09_20:13:31.614044) 20:13:35.172902 run osmo-hlr_10.42.42.2(pid=10464): stderr: | �[0;m�[1;31m20221209201331845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201331845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201331845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201331845 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201331846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201331846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201331870 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201331882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201331882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201331882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:13:35.214760 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10463): Terminating (SIGTERM) 20:13:35.254589 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10466): Terminating (SIGTERM) 20:13:35.294451 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10469): Terminating (SIGTERM) 20:13:35.304020 --- ParallelTerminationStrategy: PID 10463 died... 20:13:35.357388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10463): Terminated: ok {rc=0} 20:13:35.367285 --- ParallelTerminationStrategy: PID 10466 died... 20:13:35.419947 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10466): Terminated: ok {rc=0} 20:13:35.429970 --- ParallelTerminationStrategy: PID 10469 died... 20:13:35.482550 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10469): Terminated: ok {rc=0} 20:13:35.570866 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10467): Process ended prematurely: osmo-stp_10.42.42.5(pid=10467) [trial-2364↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10467)]