Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11959): Process ended prematurely: osmo-stp_10.42.42.5(pid=11959) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11959)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:30:09.467226 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:09.478131 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:30:09.636827 tst cs_paging_gprs_active.py: using LAC 23531 20:30:09.760784 tst cs_paging_gprs_active.py: using RAC 71 20:30:09.881900 tst cs_paging_gprs_active.py: using CellId 23531 20:30:10.000883 tst cs_paging_gprs_active.py: using BVCI 23532 20:30:10.024386 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.035290 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.045954 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.068827 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.080642 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.092061 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.104150 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.115704 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:30:10.127641 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:30:10.250246 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:30:10.540904 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:30:10.670252 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:10.992747 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Launched 20:30:11.258065 run iperf3-srv_10.42.42.10(pid=11950): Launched 20:30:11.446474 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:30:11.574539 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:30:11.892833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11951): Launched 20:30:12.157734 run iperf3-srv_10.42.42.10(pid=11952): Launched 20:30:12.346261 tst cs_paging_gprs_active.py:38: start network... 20:30:12.474655 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:30:12.959214 run create_hlr_db(pid=11953): Launched 20:30:13.136101 bus /gobi_6: Setting Powered False 20:30:14.157513 run create_hlr_db(pid=11953): Terminated: ok {rc=0} 20:30:14.564576 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11955): Launched 20:30:14.871889 run osmo-hlr_10.42.42.2(pid=11956): Launched 20:30:14.984037 run osmo-stp_10.42.42.5: Starting osmo-stp 20:30:15.515230 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11958): Launched 20:30:15.821664 run osmo-stp_10.42.42.5(pid=11959): Launched 20:30:16.016116 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:30:16.610219 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11961): Launched 20:30:16.722666 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:30:17.043376 run patchelf(pid=11962): Launched 20:30:17.240808 run osmo-stp_10.42.42.5(pid=11959): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11959)] 20:30:17.382990 run osmo-stp_10.42.42.5(pid=11959): stdout: | (launched: 2022-12-09_20:30:15.671351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:17.523943 run osmo-stp_10.42.42.5(pid=11959): stderr: | �[0;m�[38;5;43m20221209203015841 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203015841 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203015842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203015842 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203015842 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203015843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203015843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:17.660030 run osmo-stp_10.42.42.5(pid=11959): stdout: | (launched: 2022-12-09_20:30:15.671351) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:30:17.794771 run osmo-stp_10.42.42.5(pid=11959): stderr: | �[0;m�[38;5;43m20221209203015841 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203015841 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203015842 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203015842 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203015842 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203015843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203015843 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:30:17.952252 run patchelf(pid=11962): Terminating (SIGINT) 20:30:18.137526 run patchelf(pid=11962): Terminated: ok {rc=0} 20:30:18.172009 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11959): Process ended prematurely: osmo-stp_10.42.42.5(pid=11959) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11959)] [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:30:18.182370 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 20:30:18.245838 run osmo-hlr_10.42.42.2(pid=11956): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11956)] 20:30:18.297803 run osmo-hlr_10.42.42.2(pid=11956): stdout: | (launched: 2022-12-09_20:30:14.720760) 20:30:18.350209 run osmo-hlr_10.42.42.2(pid=11956): stderr: | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209203014900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209203014912 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209203014921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209203014921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209203014921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:30:18.395221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Terminating (SIGTERM) 20:30:18.437447 run iperf3-srv_10.42.42.10(pid=11950): Terminating (SIGTERM) 20:30:18.479412 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11951): Terminating (SIGTERM) 20:30:18.521364 run iperf3-srv_10.42.42.10(pid=11952): Terminating (SIGTERM) 20:30:18.563227 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11955): Terminating (SIGTERM) 20:30:18.605178 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11958): Terminating (SIGTERM) 20:30:18.647190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11961): Terminating (SIGTERM) 20:30:18.657006 --- ParallelTerminationStrategy: PID 11949 died... 20:30:18.713391 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11949): Terminated: ok {rc=0} 20:30:18.723545 --- ParallelTerminationStrategy: PID 11950 died... 20:30:18.779310 run iperf3-srv_10.42.42.10(pid=11950): Terminated {rc=256} 20:30:18.789318 --- ParallelTerminationStrategy: PID 11951 died... 20:30:18.845173 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11951): Terminated: ok {rc=0} 20:30:18.855282 --- ParallelTerminationStrategy: PID 11952 died... 20:30:18.911030 run iperf3-srv_10.42.42.10(pid=11952): Terminated {rc=256} 20:30:18.921259 --- ParallelTerminationStrategy: PID 11955 died... 20:30:18.977374 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11955): Terminated: ok {rc=0} 20:30:18.987849 --- ParallelTerminationStrategy: PID 11958 died... 20:30:19.043811 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11958): Terminated: ok {rc=0} 20:30:19.053986 --- ParallelTerminationStrategy: PID 11961 died... 20:30:19.110339 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11961): Terminated: ok {rc=0} 20:30:19.196419 bus /gobi_0: Setting Powered False 20:30:20.302025 bus /gobi_0: Setting Powered False 20:30:21.408703 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11959): Process ended prematurely: osmo-stp_10.42.42.5(pid=11959) [trial-2364↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11959)]