Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=14701): Process ended prematurely: osmo-stp_10.42.42.5(pid=14701) [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14701)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 21:00:59.230649 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.241851 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:00:59.381594 tst cs_paging_gprs_active.py: using LAC 23696 21:00:59.509723 tst cs_paging_gprs_active.py: using RAC 236 21:00:59.630868 tst cs_paging_gprs_active.py: using CellId 23696 21:00:59.751264 tst cs_paging_gprs_active.py: using BVCI 23697 21:00:59.774660 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.785634 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.796236 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.807499 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.818711 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.829976 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.841243 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.852277 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.863666 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:00:59.984467 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:01:00.267057 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:01:00.394953 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:01:00.710462 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14691): Launched 21:01:00.995370 run iperf3-srv_10.42.42.10(pid=14692): Launched 21:01:01.202278 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:01:01.342849 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:01:01.703631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14693): Launched 21:01:02.006124 run iperf3-srv_10.42.42.10(pid=14694): Launched 21:01:02.211723 tst cs_paging_gprs_active.py:38: start network... 21:01:02.349616 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:01:02.874239 run create_hlr_db(pid=14695): Launched 21:01:03.063974 bus /sierra_2: Setting Powered False 21:01:04.084798 run create_hlr_db(pid=14695): Terminated: ok {rc=0} 21:01:04.518638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14697): Launched 21:01:04.844849 run osmo-hlr_10.42.42.2(pid=14698): Launched 21:01:04.966219 run osmo-stp_10.42.42.5: Starting osmo-stp 21:01:05.535990 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14700): Launched 21:01:05.862944 run osmo-stp_10.42.42.5(pid=14701): Launched 21:01:05.981869 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:01:06.552346 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14703): Launched 21:01:06.669217 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:01:06.954712 run patchelf(pid=14704): Launched 21:01:07.146217 run osmo-stp_10.42.42.5(pid=14701): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14701)] 21:01:07.285861 run osmo-stp_10.42.42.5(pid=14701): stdout: | (launched: 2022-12-09_21:01:05.703236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:07.425369 run osmo-stp_10.42.42.5(pid=14701): stderr: | �[0;m�[38;5;43m20221209210105894 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210105895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210105895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210105895 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:07.560248 run osmo-stp_10.42.42.5(pid=14701): stdout: | (launched: 2022-12-09_21:01:05.703236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:07.694148 run osmo-stp_10.42.42.5(pid=14701): stderr: | �[0;m�[38;5;43m20221209210105894 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209210105895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209210105895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209210105895 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209210105896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:07.850052 run patchelf(pid=14704): Terminating (SIGINT) 21:01:08.033685 run patchelf(pid=14704): Terminated: ok {rc=0} 21:01:08.067422 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14701): Process ended prematurely: osmo-stp_10.42.42.5(pid=14701) [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14701)] [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 21:01:08.077514 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 21:01:08.140146 run osmo-hlr_10.42.42.2(pid=14698): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14698)] 21:01:08.191020 run osmo-hlr_10.42.42.2(pid=14698): stdout: | (launched: 2022-12-09_21:01:04.685655) 21:01:08.242230 run osmo-hlr_10.42.42.2(pid=14698): stderr: | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209210104885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209210104897 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209210104905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209210104906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209210104906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:01:08.286052 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14691): Terminating (SIGTERM) 21:01:08.327231 run iperf3-srv_10.42.42.10(pid=14692): Terminating (SIGTERM) 21:01:08.368697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14693): Terminating (SIGTERM) 21:01:08.409807 run iperf3-srv_10.42.42.10(pid=14694): Terminating (SIGTERM) 21:01:08.451027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14697): Terminating (SIGTERM) 21:01:08.492320 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14700): Terminating (SIGTERM) 21:01:08.533765 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14703): Terminating (SIGTERM) 21:01:08.543526 --- ParallelTerminationStrategy: PID 14691 died... 21:01:08.599328 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14691): Terminated: ok {rc=0} 21:01:08.609578 --- ParallelTerminationStrategy: PID 14692 died... 21:01:08.664916 run iperf3-srv_10.42.42.10(pid=14692): Terminated {rc=256} 21:01:08.675149 --- ParallelTerminationStrategy: PID 14693 died... 21:01:08.730382 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14693): Terminated: ok {rc=0} 21:01:08.740629 --- ParallelTerminationStrategy: PID 14694 died... 21:01:08.795623 run iperf3-srv_10.42.42.10(pid=14694): Terminated {rc=256} 21:01:08.806036 --- ParallelTerminationStrategy: PID 14697 died... 21:01:08.861377 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14697): Terminated: ok {rc=0} 21:01:08.871763 --- ParallelTerminationStrategy: PID 14700 died... 21:01:08.927459 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14700): Terminated: ok {rc=0} 21:01:08.937961 --- ParallelTerminationStrategy: PID 14703 died... 21:01:08.993283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14703): Terminated: ok {rc=0} 21:01:09.079435 bus /gobi_0: Setting Powered False 21:01:10.182070 bus /gobi_0: Setting Powered False 21:01:11.289135 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14701): Process ended prematurely: osmo-stp_10.42.42.5(pid=14701) [trial-2364↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14701)]