Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=21631): Process ended prematurely: osmo-stp_10.42.42.5(pid=21631) [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21631)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 22:07:44.290907 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.302207 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:07:44.449968 tst cs_paging_gprs_active.py: using LAC 23982 22:07:44.573753 tst cs_paging_gprs_active.py: using RAC 12 22:07:44.691835 tst cs_paging_gprs_active.py: using CellId 23982 22:07:44.809985 tst cs_paging_gprs_active.py: using BVCI 23983 22:07:44.833058 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.843640 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.854177 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.864853 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.875586 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.886296 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.897130 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.907668 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:07:44.918549 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:07:45.040323 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:07:45.336775 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:07:45.472486 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:07:45.806859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21621): Launched 22:07:46.113307 run iperf3-srv_10.42.42.10(pid=21622): Launched 22:07:46.315216 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:07:46.452831 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:07:46.803191 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21623): Launched 22:07:47.108235 run iperf3-srv_10.42.42.10(pid=21624): Launched 22:07:47.307979 tst cs_paging_gprs_active.py:38: start network... 22:07:47.443295 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:07:47.962477 run create_hlr_db(pid=21625): Launched 22:07:48.149631 bus /gobi_6: Setting Powered False 22:07:49.170205 run create_hlr_db(pid=21625): Terminated: ok {rc=0} 22:07:49.600663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21627): Launched 22:07:49.923450 run osmo-hlr_10.42.42.2(pid=21628): Launched 22:07:50.043912 run osmo-stp_10.42.42.5: Starting osmo-stp 22:07:50.603997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21630): Launched 22:07:50.926987 run osmo-stp_10.42.42.5(pid=21631): Launched 22:07:51.044675 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:07:51.608802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21633): Launched 22:07:51.723792 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:07:52.006083 run patchelf(pid=21634): Launched 22:07:52.196581 run osmo-stp_10.42.42.5(pid=21631): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21631)] 22:07:52.334836 run osmo-stp_10.42.42.5(pid=21631): stdout: | (launched: 2022-12-09_22:07:50.768237) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:07:52.473349 run osmo-stp_10.42.42.5(pid=21631): stderr: | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220750960 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:07:52.607349 run osmo-stp_10.42.42.5(pid=21631): stdout: | (launched: 2022-12-09_22:07:50.768237) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:07:52.740237 run osmo-stp_10.42.42.5(pid=21631): stderr: | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209220750960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209220750960 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209220750963 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:07:52.895797 run patchelf(pid=21634): Terminating (SIGINT) 22:07:53.079324 run patchelf(pid=21634): Terminated: ok {rc=0} 22:07:53.112872 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=21631): Process ended prematurely: osmo-stp_10.42.42.5(pid=21631) [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21631)] [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 22:07:53.122782 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 22:07:53.185685 run osmo-hlr_10.42.42.2(pid=21628): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21628)] 22:07:53.237073 run osmo-hlr_10.42.42.2(pid=21628): stdout: | (launched: 2022-12-09_22:07:49.765357) 22:07:53.288839 run osmo-hlr_10.42.42.2(pid=21628): stderr: | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209220749964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209220749976 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209220749985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209220749985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209220749985 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:07:53.333231 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21621): Terminating (SIGTERM) 22:07:53.374799 run iperf3-srv_10.42.42.10(pid=21622): Terminating (SIGTERM) 22:07:53.416758 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21623): Terminating (SIGTERM) 22:07:53.458355 run iperf3-srv_10.42.42.10(pid=21624): Terminating (SIGTERM) 22:07:53.499928 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21627): Terminating (SIGTERM) 22:07:53.541571 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21630): Terminating (SIGTERM) 22:07:53.583260 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21633): Terminating (SIGTERM) 22:07:53.592854 --- ParallelTerminationStrategy: PID 21621 died... 22:07:53.648542 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21621): Terminated: ok {rc=0} 22:07:53.658496 --- ParallelTerminationStrategy: PID 21622 died... 22:07:53.713604 run iperf3-srv_10.42.42.10(pid=21622): Terminated {rc=256} 22:07:53.723446 --- ParallelTerminationStrategy: PID 21623 died... 22:07:53.778845 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21623): Terminated: ok {rc=0} 22:07:53.788691 --- ParallelTerminationStrategy: PID 21624 died... 22:07:53.843902 run iperf3-srv_10.42.42.10(pid=21624): Terminated {rc=256} 22:07:53.853867 --- ParallelTerminationStrategy: PID 21627 died... 22:07:53.908996 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21627): Terminated: ok {rc=0} 22:07:53.918998 --- ParallelTerminationStrategy: PID 21630 died... 22:07:53.974551 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21630): Terminated: ok {rc=0} 22:07:53.984547 --- ParallelTerminationStrategy: PID 21633 died... 22:07:54.039953 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21633): Terminated: ok {rc=0} 22:07:54.128140 bus /gobi_0: Setting Powered False 22:07:55.235149 bus /gobi_0: Setting Powered False 22:07:56.342421 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21631): Process ended prematurely: osmo-stp_10.42.42.5(pid=21631) [trial-2365↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21631)]