Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=24046): Process ended prematurely: osmo-stp_10.42.42.5(pid=24046) [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24046)]
Standard Output
---------------------------------------------- trial-2365 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 22:26:53.093740 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.104943 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:26:53.270223 tst cs_paging_gprs_active.py: using LAC 24083 22:26:53.396018 tst cs_paging_gprs_active.py: using RAC 113 22:26:53.524398 tst cs_paging_gprs_active.py: using CellId 24083 22:26:53.650075 tst cs_paging_gprs_active.py: using BVCI 24084 22:26:53.674686 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.685977 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.697127 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.708224 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.719373 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.730515 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.741768 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.752759 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:26:53.764040 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:26:53.880199 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:26:54.177124 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 22:26:54.310636 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:26:54.644761 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24036): Launched 22:26:54.922240 run iperf3-srv_10.42.42.10(pid=24037): Launched 22:26:55.118584 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 22:26:55.252297 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:26:55.584742 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24038): Launched 22:26:55.860046 run iperf3-srv_10.42.42.10(pid=24039): Launched 22:26:56.056571 tst cs_paging_gprs_active.py:38: start network... 22:26:56.190292 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:26:56.704237 run create_hlr_db(pid=24040): Launched 22:26:56.889052 bus /gobi_6: Setting Powered False 22:26:57.911455 run create_hlr_db(pid=24040): Terminated: ok {rc=0} 22:26:58.318214 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24042): Launched 22:26:58.620667 run osmo-hlr_10.42.42.2(pid=24043): Launched 22:26:58.738639 run osmo-stp_10.42.42.5: Starting osmo-stp 22:26:59.275654 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24045): Launched 22:26:59.577737 run osmo-stp_10.42.42.5(pid=24046): Launched 22:26:59.688373 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:27:00.212828 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24048): Launched 22:27:00.320185 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:27:00.591125 run patchelf(pid=24049): Launched 22:27:00.779418 run osmo-stp_10.42.42.5(pid=24046): ERR: Terminated: ERROR {rc=1} [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24046)] 22:27:00.918833 run osmo-stp_10.42.42.5(pid=24046): stdout: | (launched: 2022-12-09_22:26:59.428324) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:27:01.058619 run osmo-stp_10.42.42.5(pid=24046): stderr: | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209222659598 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:27:01.221910 run osmo-stp_10.42.42.5(pid=24046): stdout: | (launched: 2022-12-09_22:26:59.428324) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:27:01.392167 run osmo-stp_10.42.42.5(pid=24046): stderr: | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209222659597 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209222659598 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209222659598 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:27:01.580881 run patchelf(pid=24049): Terminating (SIGINT) 22:27:01.766666 run patchelf(pid=24049): Terminated: ok {rc=0} 22:27:01.800765 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=24046): Process ended prematurely: osmo-stp_10.42.42.5(pid=24046) [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24046)] [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 22:27:01.810836 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 22:27:01.886592 run osmo-hlr_10.42.42.2(pid=24043): ERR: Terminated: ERROR {rc=237} [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24043)] 22:27:01.947989 run osmo-hlr_10.42.42.2(pid=24043): stdout: | (launched: 2022-12-09_22:26:58.471153) 22:27:02.010228 run osmo-hlr_10.42.42.2(pid=24043): stderr: | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209222658646 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209222658658 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2365/run.2022-12-09_21-44-27/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209222658666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209222658667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209222658667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:27:02.064623 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24036): Terminating (SIGTERM) 22:27:02.115774 run iperf3-srv_10.42.42.10(pid=24037): Terminating (SIGTERM) 22:27:02.168858 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24038): Terminating (SIGTERM) 22:27:02.220650 run iperf3-srv_10.42.42.10(pid=24039): Terminating (SIGTERM) 22:27:02.271588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24042): Terminating (SIGTERM) 22:27:02.312596 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24045): Terminating (SIGTERM) 22:27:02.353866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24048): Terminating (SIGTERM) 22:27:02.363436 --- ParallelTerminationStrategy: PID 24036 died... 22:27:02.418262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24036): Terminated: ok {rc=0} 22:27:02.427747 --- ParallelTerminationStrategy: PID 24037 died... 22:27:02.481069 run iperf3-srv_10.42.42.10(pid=24037): Terminated {rc=256} 22:27:02.490668 --- ParallelTerminationStrategy: PID 24038 died... 22:27:02.544355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24038): Terminated: ok {rc=0} 22:27:02.554382 --- ParallelTerminationStrategy: PID 24039 died... 22:27:02.607988 run iperf3-srv_10.42.42.10(pid=24039): Terminated {rc=256} 22:27:02.617848 --- ParallelTerminationStrategy: PID 24042 died... 22:27:02.671387 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24042): Terminated: ok {rc=0} 22:27:02.680826 --- ParallelTerminationStrategy: PID 24045 died... 22:27:02.733997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24045): Terminated: ok {rc=0} 22:27:02.743686 --- ParallelTerminationStrategy: PID 24048 died... 22:27:02.797716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24048): Terminated: ok {rc=0} 22:27:02.887411 bus /gobi_0: Setting Powered False 22:27:03.991870 bus /gobi_0: Setting Powered False 22:27:05.102875 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24046): Process ended prematurely: osmo-stp_10.42.42.5(pid=24046) [trial-2365↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24046)]