Failed
gprs:nanobts+band-900.cs_paging_gprs_active.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=1913): Process ended prematurely: osmo-stp_10.42.42.5(pid=1913) [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1913)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-900 cs_paging_gprs_active.py ---------------------------------------------- 00:20:42.316641 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.327321 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 00:20:42.463261 tst cs_paging_gprs_active.py: using LAC 24689 00:20:42.590656 tst cs_paging_gprs_active.py: using RAC 209 00:20:42.717324 tst cs_paging_gprs_active.py: using CellId 24689 00:20:42.843293 tst cs_paging_gprs_active.py: using BVCI 24690 00:20:42.867909 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.879298 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.890599 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.901670 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.913184 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.924533 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.935667 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.946756 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 00:20:42.958229 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 00:20:43.080008 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 00:20:43.376920 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:20:43.511525 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:20:43.843590 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1903): Launched 00:20:44.119817 run iperf3-srv_10.42.42.10(pid=1904): Launched 00:20:44.317247 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:20:44.451731 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:20:44.784024 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1905): Launched 00:20:45.059890 run iperf3-srv_10.42.42.10(pid=1906): Launched 00:20:45.257526 tst cs_paging_gprs_active.py:38: start network... 00:20:45.392049 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:20:45.905571 run create_hlr_db(pid=1907): Launched 00:20:46.095593 bus /sierra_2: Setting Powered False 00:20:47.154789 run create_hlr_db(pid=1907): Terminated: ok {rc=0} 00:20:47.601736 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1909): Launched 00:20:47.923742 run osmo-hlr_10.42.42.2(pid=1910): Launched 00:20:48.043631 run osmo-stp_10.42.42.5: Starting osmo-stp 00:20:48.601667 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1912): Launched 00:20:48.923282 run osmo-stp_10.42.42.5(pid=1913): Launched 00:20:49.040938 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:20:49.600066 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1915): Launched 00:20:49.714981 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:20:49.995112 run patchelf(pid=1916): Launched 00:20:50.183205 run osmo-stp_10.42.42.5(pid=1913): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1913)] 00:20:50.321225 run osmo-stp_10.42.42.5(pid=1913): stdout: | (launched: 2022-12-10_00:20:48.765491) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:20:50.459237 run osmo-stp_10.42.42.5(pid=1913): stderr: | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002048958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:20:50.592360 run osmo-stp_10.42.42.5(pid=1913): stdout: | (launched: 2022-12-10_00:20:48.765491) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:20:50.724438 run osmo-stp_10.42.42.5(pid=1913): stderr: | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002048957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002048958 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002048960 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:20:50.878168 run patchelf(pid=1916): Terminating (SIGINT) 00:20:51.059135 run patchelf(pid=1916): Terminated: ok {rc=0} 00:20:51.092334 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1913): Process ended prematurely: osmo-stp_10.42.42.5(pid=1913) [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1913)] [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38] 00:20:51.102172 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 00:20:51.165619 run osmo-hlr_10.42.42.2(pid=1910): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1910)] 00:20:51.216943 run osmo-hlr_10.42.42.2(pid=1910): stdout: | (launched: 2022-12-10_00:20:47.765479) 00:20:51.269074 run osmo-hlr_10.42.42.2(pid=1910): stderr: | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210002047964 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210002047975 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210002047984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210002047984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210002047984 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:20:51.313327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1903): Terminating (SIGTERM) 00:20:51.355019 run iperf3-srv_10.42.42.10(pid=1904): Terminating (SIGTERM) 00:20:51.396635 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1905): Terminating (SIGTERM) 00:20:51.437937 run iperf3-srv_10.42.42.10(pid=1906): Terminating (SIGTERM) 00:20:51.479842 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1909): Terminating (SIGTERM) 00:20:51.521514 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1912): Terminating (SIGTERM) 00:20:51.562936 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1915): Terminating (SIGTERM) 00:20:51.572798 --- ParallelTerminationStrategy: PID 1903 died... 00:20:51.628900 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1903): Terminated: ok {rc=0} 00:20:51.639027 --- ParallelTerminationStrategy: PID 1904 died... 00:20:51.694496 run iperf3-srv_10.42.42.10(pid=1904): Terminated {rc=256} 00:20:51.704457 --- ParallelTerminationStrategy: PID 1905 died... 00:20:51.759967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1905): Terminated: ok {rc=0} 00:20:51.770024 --- ParallelTerminationStrategy: PID 1906 died... 00:20:51.825116 run iperf3-srv_10.42.42.10(pid=1906): Terminated {rc=256} 00:20:51.835319 --- ParallelTerminationStrategy: PID 1909 died... 00:20:51.891099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1909): Terminated: ok {rc=0} 00:20:51.901161 --- ParallelTerminationStrategy: PID 1912 died... 00:20:51.957218 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1912): Terminated: ok {rc=0} 00:20:51.967455 --- ParallelTerminationStrategy: PID 1915 died... 00:20:52.023650 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1915): Terminated: ok {rc=0} 00:20:52.109682 bus /gobi_0: Setting Powered False 00:20:53.216188 bus /gobi_0: Setting Powered False 00:20:54.323711 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1913): Process ended prematurely: osmo-stp_10.42.42.5(pid=1913) [trial-2366↪gprs:nanobts+band-900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1913)]