Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30359): Process ended prematurely: osmo-stp_10.42.42.5(pid=30359) [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30359)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:36:44.530454 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:44.541726 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:36:44.709972 tst cs_paging_gprs_active.py: using LAC 24453 23:36:44.833370 tst cs_paging_gprs_active.py: using RAC 228 23:36:44.957497 tst cs_paging_gprs_active.py: using CellId 24453 23:36:45.079438 tst cs_paging_gprs_active.py: using BVCI 24454 23:36:45.102565 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.113545 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.124320 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.135785 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.147162 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.158633 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.170197 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.181567 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:36:45.193037 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:36:45.314851 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:36:45.607845 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:36:45.742624 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:36:46.104903 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30349): Launched 23:36:46.403165 run iperf3-srv_10.42.42.10(pid=30350): Launched 23:36:46.593354 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:36:46.723496 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:36:47.047049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30351): Launched 23:36:47.330898 run iperf3-srv_10.42.42.10(pid=30352): Launched 23:36:47.513304 tst cs_paging_gprs_active.py:38: start network... 23:36:47.637845 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:36:48.115477 run create_hlr_db(pid=30353): Launched 23:36:48.287296 bus /gobi_6: Setting Powered False 23:36:49.308610 run create_hlr_db(pid=30353): Terminated: ok {rc=0} 23:36:49.706400 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30355): Launched 23:36:50.004808 run osmo-hlr_10.42.42.2(pid=30356): Launched 23:36:50.113752 run osmo-stp_10.42.42.5: Starting osmo-stp 23:36:50.629810 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30358): Launched 23:36:50.926795 run osmo-stp_10.42.42.5(pid=30359): Launched 23:36:51.033727 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:36:51.553321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30361): Launched 23:36:51.659523 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:36:51.919879 run patchelf(pid=30362): Launched 23:36:52.094215 run osmo-stp_10.42.42.5(pid=30359): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30359)] 23:36:52.222051 run osmo-stp_10.42.42.5(pid=30359): stdout: | (launched: 2022-12-09_23:36:50.781271) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:36:52.349792 run osmo-stp_10.42.42.5(pid=30359): stderr: | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209233650954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:36:52.472511 run osmo-stp_10.42.42.5(pid=30359): stdout: | (launched: 2022-12-09_23:36:50.781271) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:36:52.594322 run osmo-stp_10.42.42.5(pid=30359): stderr: | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209233650953 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209233650954 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209233650954 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:36:52.737066 run patchelf(pid=30362): Terminating (SIGINT) 23:36:52.904492 run patchelf(pid=30362): Terminated: ok {rc=0} 23:36:52.935703 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30359): Process ended prematurely: osmo-stp_10.42.42.5(pid=30359) [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30359)] [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:36:52.944774 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 23:36:53.003966 run osmo-hlr_10.42.42.2(pid=30356): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30356)] 23:36:53.052254 run osmo-hlr_10.42.42.2(pid=30356): stdout: | (launched: 2022-12-09_23:36:49.859424) 23:36:53.101055 run osmo-hlr_10.42.42.2(pid=30356): stderr: | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209233650036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209233650048 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209233650059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209233650059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209233650059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:36:53.142273 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30349): Terminating (SIGTERM) 23:36:53.181062 run iperf3-srv_10.42.42.10(pid=30350): Terminating (SIGTERM) 23:36:53.219814 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30351): Terminating (SIGTERM) 23:36:53.258474 run iperf3-srv_10.42.42.10(pid=30352): Terminating (SIGTERM) 23:36:53.297450 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30355): Terminating (SIGTERM) 23:36:53.336248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30358): Terminating (SIGTERM) 23:36:53.374993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30361): Terminating (SIGTERM) 23:36:53.383910 --- ParallelTerminationStrategy: PID 30349 died... 23:36:53.436347 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30349): Terminated: ok {rc=0} 23:36:53.445778 --- ParallelTerminationStrategy: PID 30350 died... 23:36:53.497896 run iperf3-srv_10.42.42.10(pid=30350): Terminated {rc=256} 23:36:53.507235 --- ParallelTerminationStrategy: PID 30351 died... 23:36:53.559276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30351): Terminated: ok {rc=0} 23:36:53.568548 --- ParallelTerminationStrategy: PID 30352 died... 23:36:53.620638 run iperf3-srv_10.42.42.10(pid=30352): Terminated {rc=256} 23:36:53.630342 --- ParallelTerminationStrategy: PID 30355 died... 23:36:53.682445 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30355): Terminated: ok {rc=0} 23:36:53.691770 --- ParallelTerminationStrategy: PID 30358 died... 23:36:53.743760 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30358): Terminated: ok {rc=0} 23:36:53.753193 --- ParallelTerminationStrategy: PID 30361 died... 23:36:53.805738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30361): Terminated: ok {rc=0} 23:36:53.892385 bus /gobi_0: Setting Powered False 23:36:54.995540 bus /gobi_0: Setting Powered False 23:36:56.106706 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30359): Process ended prematurely: osmo-stp_10.42.42.5(pid=30359) [trial-2366↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30359)]