Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)]
Standard Output
---------------------------------------------- trial-2366 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:53:46.061780 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.074246 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:53:46.236154 tst cs_paging_gprs_active.py: using LAC 24544 23:53:46.388134 tst cs_paging_gprs_active.py: using RAC 64 23:53:46.514391 tst cs_paging_gprs_active.py: using CellId 24544 23:53:46.663547 tst cs_paging_gprs_active.py: using BVCI 24545 23:53:46.687583 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.699192 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.710647 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.722019 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.733517 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.744794 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.756417 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.767886 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:53:46.779271 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:53:46.899856 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:53:47.247323 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:53:47.383255 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:53:47.711536 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Launched 23:53:47.984364 run iperf3-srv_10.42.42.10(pid=32079): Launched 23:53:48.179674 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:53:48.312381 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:53:48.639659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Launched 23:53:48.911339 run iperf3-srv_10.42.42.10(pid=32081): Launched 23:53:49.106503 tst cs_paging_gprs_active.py:38: start network... 23:53:49.239485 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:53:49.737972 run create_hlr_db(pid=32082): Launched 23:53:49.921300 bus /gobi_6: Setting Powered False 23:53:50.942835 run create_hlr_db(pid=32082): Terminated: ok {rc=0} 23:53:51.364353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Launched 23:53:51.680812 run osmo-hlr_10.42.42.2(pid=32085): Launched 23:53:51.799419 run osmo-stp_10.42.42.5: Starting osmo-stp 23:53:52.350499 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Launched 23:53:52.665620 run osmo-stp_10.42.42.5(pid=32088): Launched 23:53:52.780404 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:53:53.331247 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Launched 23:53:53.445091 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:53:53.722443 run patchelf(pid=32091): Launched 23:53:53.907839 run osmo-stp_10.42.42.5(pid=32088): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)] 23:53:54.043592 run osmo-stp_10.42.42.5(pid=32088): stdout: | (launched: 2022-12-09_23:53:52.511270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:53:54.180508 run osmo-stp_10.42.42.5(pid=32088): stderr: | �[0;m�[38;5;43m20221209235352703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209235352703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209235352704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209235352704 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:53:54.311641 run osmo-stp_10.42.42.5(pid=32088): stdout: | (launched: 2022-12-09_23:53:52.511270) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:53:54.441793 run osmo-stp_10.42.42.5(pid=32088): stderr: | �[0;m�[38;5;43m20221209235352703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209235352703 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209235352704 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209235352704 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209235352705 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:53:54.593333 run patchelf(pid=32091): Terminating (SIGINT) 23:53:54.771380 run patchelf(pid=32091): Terminated: ok {rc=0} 23:53:54.804170 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)] [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:53:54.814028 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 23:53:54.876928 run osmo-hlr_10.42.42.2(pid=32085): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32085)] 23:53:54.928030 run osmo-hlr_10.42.42.2(pid=32085): stdout: | (launched: 2022-12-09_23:53:51.525743) 23:53:54.979925 run osmo-hlr_10.42.42.2(pid=32085): stderr: | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209235351722 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209235351734 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209235351742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209235351742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209235351742 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:53:55.024044 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Terminating (SIGTERM) 23:53:55.065631 run iperf3-srv_10.42.42.10(pid=32079): Terminating (SIGTERM) 23:53:55.107409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Terminating (SIGTERM) 23:53:55.149062 run iperf3-srv_10.42.42.10(pid=32081): Terminating (SIGTERM) 23:53:55.191123 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Terminating (SIGTERM) 23:53:55.232785 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Terminating (SIGTERM) 23:53:55.274051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Terminating (SIGTERM) 23:53:55.283659 --- ParallelTerminationStrategy: PID 32078 died... 23:53:55.339351 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32078): Terminated: ok {rc=0} 23:53:55.349402 --- ParallelTerminationStrategy: PID 32079 died... 23:53:55.404542 run iperf3-srv_10.42.42.10(pid=32079): Terminated {rc=256} 23:53:55.414344 --- ParallelTerminationStrategy: PID 32080 died... 23:53:55.469491 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32080): Terminated: ok {rc=0} 23:53:55.479675 --- ParallelTerminationStrategy: PID 32081 died... 23:53:55.534814 run iperf3-srv_10.42.42.10(pid=32081): Terminated {rc=256} 23:53:55.544618 --- ParallelTerminationStrategy: PID 32084 died... 23:53:55.600082 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32084): Terminated: ok {rc=0} 23:53:55.610135 --- ParallelTerminationStrategy: PID 32087 died... 23:53:55.665508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32087): Terminated: ok {rc=0} 23:53:55.675488 --- ParallelTerminationStrategy: PID 32090 died... 23:53:55.730924 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32090): Terminated: ok {rc=0} 23:53:55.817189 bus /gobi_0: Setting Powered False 23:53:56.919754 bus /gobi_0: Setting Powered False 23:53:58.030382 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32088): Process ended prematurely: osmo-stp_10.42.42.5(pid=32088) [trial-2366↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32088)]