Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=2408): Process ended prematurely: osmo-stp_10.42.42.5(pid=2408) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2408)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 00:23:57.107222 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.119767 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:23:57.264081 tst iperf3.py: using LAC 24705 00:23:57.388034 tst iperf3.py: using RAC 225 00:23:57.511783 tst iperf3.py: using CellId 24705 00:23:57.638489 tst iperf3.py: using BVCI 24706 00:23:57.662972 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.674819 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.686862 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.698726 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.710663 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.722498 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.734758 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.746317 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:57.758276 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:23:58.050913 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:23:58.183509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:23:58.511074 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2400): Launched 00:23:58.782751 run iperf3-srv_10.42.42.10(pid=2401): Launched 00:23:58.976846 tst iperf3.py:8: start network... 00:23:59.110409 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:23:59.610104 run create_hlr_db(pid=2402): Launched 00:23:59.793769 bus /gobi_6: Setting Powered False 00:24:00.806285 run create_hlr_db(pid=2402): Terminated: ok {rc=0} 00:24:01.273449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2404): Launched 00:24:01.698527 run osmo-hlr_10.42.42.2(pid=2405): Launched 00:24:01.897087 run osmo-stp_10.42.42.5: Starting osmo-stp 00:24:02.495298 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2407): Launched 00:24:02.811881 run osmo-stp_10.42.42.5(pid=2408): Launched 00:24:02.927205 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:24:03.480486 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2410): Launched 00:24:03.594358 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:24:03.871508 run patchelf(pid=2411): Launched 00:24:04.058759 run osmo-stp_10.42.42.5(pid=2408): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2408)] 00:24:04.195851 run osmo-stp_10.42.42.5(pid=2408): stdout: | (launched: 2022-12-10_00:24:02.656699) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:04.333914 run osmo-stp_10.42.42.5(pid=2408): stderr: | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002402848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:04.466501 run osmo-stp_10.42.42.5(pid=2408): stdout: | (launched: 2022-12-10_00:24:02.656699) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:24:04.597839 run osmo-stp_10.42.42.5(pid=2408): stderr: | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002402848 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002402848 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002402849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:24:04.750852 run patchelf(pid=2411): Terminating (SIGINT) 00:24:04.930252 run patchelf(pid=2411): Terminated: ok {rc=0} 00:24:04.963264 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2408): Process ended prematurely: osmo-stp_10.42.42.5(pid=2408) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2408)] [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 00:24:04.973283 tst iperf3.py:8: Test FAILED (7.9 sec) 00:24:05.037082 run osmo-hlr_10.42.42.2(pid=2405): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2405)] 00:24:05.088729 run osmo-hlr_10.42.42.2(pid=2405): stdout: | (launched: 2022-12-10_00:24:01.439887) 00:24:05.140998 run osmo-hlr_10.42.42.2(pid=2405): stderr: | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210002401752 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210002401773 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210002401781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210002401782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210002401782 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:24:05.185438 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2400): Terminating (SIGTERM) 00:24:05.227419 run iperf3-srv_10.42.42.10(pid=2401): Terminating (SIGTERM) 00:24:05.269559 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2404): Terminating (SIGTERM) 00:24:05.311252 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2407): Terminating (SIGTERM) 00:24:05.353142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2410): Terminating (SIGTERM) 00:24:05.363758 --- ParallelTerminationStrategy: PID 2400 died... 00:24:05.420377 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2400): Terminated: ok {rc=0} 00:24:05.430319 --- ParallelTerminationStrategy: PID 2401 died... 00:24:05.486041 run iperf3-srv_10.42.42.10(pid=2401): Terminated {rc=256} 00:24:05.495973 --- ParallelTerminationStrategy: PID 2404 died... 00:24:05.552003 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2404): Terminated: ok {rc=0} 00:24:05.562027 --- ParallelTerminationStrategy: PID 2407 died... 00:24:05.617659 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2407): Terminated: ok {rc=0} 00:24:05.627670 --- ParallelTerminationStrategy: PID 2410 died... 00:24:05.683631 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2410): Terminated: ok {rc=0} 00:24:05.770643 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2408): Process ended prematurely: osmo-stp_10.42.42.5(pid=2408) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2408)]