Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28751): Process ended prematurely: osmo-stp_10.42.42.5(pid=28751) [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28751)]
Standard Output
---------------------------------------------- trial-2366 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:18:24.706831 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:24.718183 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:18:24.845843 tst cs_paging_gprs_active.py: using LAC 24355 23:18:24.969858 tst cs_paging_gprs_active.py: using RAC 130 23:18:25.099879 tst cs_paging_gprs_active.py: using CellId 24355 23:18:25.223535 tst cs_paging_gprs_active.py: using BVCI 24356 23:18:25.248250 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.259632 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.270756 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.282338 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.294052 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.305186 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.316859 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.329002 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:18:25.340873 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:25.457851 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:18:25.735835 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:18:25.860328 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:26.167984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28741): Launched 23:18:26.424075 run iperf3-srv_10.42.42.10(pid=28742): Launched 23:18:26.606333 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:18:26.730933 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:18:27.048817 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28743): Launched 23:18:27.322972 run iperf3-srv_10.42.42.10(pid=28744): Launched 23:18:27.519638 tst cs_paging_gprs_active.py:38: start network... 23:18:27.653687 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:28.154848 run create_hlr_db(pid=28745): Launched 23:18:28.339678 bus /gobi_6: Setting Powered False 23:18:29.361655 run create_hlr_db(pid=28745): Terminated: ok {rc=0} 23:18:29.785607 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28747): Launched 23:18:30.105322 run osmo-hlr_10.42.42.2(pid=28748): Launched 23:18:30.223004 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:30.778485 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28750): Launched 23:18:31.319636 run osmo-stp_10.42.42.5(pid=28751): Launched 23:18:31.504830 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:32.084741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28753): Launched 23:18:32.201988 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:32.480791 run patchelf(pid=28754): Launched 23:18:32.668017 run osmo-stp_10.42.42.5(pid=28751): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28751)] 23:18:32.805350 run osmo-stp_10.42.42.5(pid=28751): stdout: | (launched: 2022-12-09_23:18:30.957126) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:32.942779 run osmo-stp_10.42.42.5(pid=28751): stderr: | �[0;m�[38;5;43m20221209231831195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209231831195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209231831196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209231831197 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209231831198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209231831198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209231831199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:33.076324 run osmo-stp_10.42.42.5(pid=28751): stdout: | (launched: 2022-12-09_23:18:30.957126) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:33.207967 run osmo-stp_10.42.42.5(pid=28751): stderr: | �[0;m�[38;5;43m20221209231831195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209231831195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209231831196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209231831197 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209231831198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209231831198 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209231831199 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:33.361531 run patchelf(pid=28754): Terminating (SIGINT) 23:18:33.541367 run patchelf(pid=28754): Terminated: ok {rc=0} 23:18:33.574209 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28751): Process ended prematurely: osmo-stp_10.42.42.5(pid=28751) [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28751)] [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:18:33.584139 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 23:18:33.647895 run osmo-hlr_10.42.42.2(pid=28748): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28748)] 23:18:33.699755 run osmo-hlr_10.42.42.2(pid=28748): stdout: | (launched: 2022-12-09_23:18:29.948249) 23:18:33.752296 run osmo-hlr_10.42.42.2(pid=28748): stderr: | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209231830144 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209231830155 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209231830164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209231830164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209231830164 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:33.797171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28741): Terminating (SIGTERM) 23:18:33.839534 run iperf3-srv_10.42.42.10(pid=28742): Terminating (SIGTERM) 23:18:33.882105 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28743): Terminating (SIGTERM) 23:18:33.923879 run iperf3-srv_10.42.42.10(pid=28744): Terminating (SIGTERM) 23:18:33.966417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28747): Terminating (SIGTERM) 23:18:34.008712 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28750): Terminating (SIGTERM) 23:18:34.051206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28753): Terminating (SIGTERM) 23:18:34.060925 --- ParallelTerminationStrategy: PID 28741 died... 23:18:34.117727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28741): Terminated: ok {rc=0} 23:18:34.127879 --- ParallelTerminationStrategy: PID 28742 died... 23:18:34.184108 run iperf3-srv_10.42.42.10(pid=28742): Terminated {rc=256} 23:18:34.194204 --- ParallelTerminationStrategy: PID 28743 died... 23:18:34.250207 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28743): Terminated: ok {rc=0} 23:18:34.260383 --- ParallelTerminationStrategy: PID 28744 died... 23:18:34.316262 run iperf3-srv_10.42.42.10(pid=28744): Terminated {rc=256} 23:18:34.326624 --- ParallelTerminationStrategy: PID 28747 died... 23:18:34.383230 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28747): Terminated: ok {rc=0} 23:18:34.393541 --- ParallelTerminationStrategy: PID 28750 died... 23:18:34.449830 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28750): Terminated: ok {rc=0} 23:18:34.460308 --- ParallelTerminationStrategy: PID 28753 died... 23:18:34.516700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28753): Terminated: ok {rc=0} 23:18:34.603251 bus /gobi_0: Setting Powered False 23:18:35.709177 bus /gobi_0: Setting Powered False 23:18:36.815974 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28751): Process ended prematurely: osmo-stp_10.42.42.5(pid=28751) [trial-2366↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28751)]